Bertazzoni X90 IND MFE BL Handleiding

Bertazzoni Fornuis X90 IND MFE BL

Lees hieronder de 📖 handleiding in het Nederlandse voor Bertazzoni X90 IND MFE BL (16 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

INSTALLATION, MAINTENANCE AND USE

INSTRUCTIONS FOR

FREE-STANDING COOKERS

90x60 cm (X90IND MFE)

READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING

THE APPLIANCE.

The manufacturer will not be responsible for any damage to property or to persons

caused by incorrect installation or improper use of the appliance.

The manufacturer is not responsible for any inaccuracies, due to printing or transcription

errors, contained in this booklet. In addition, the appearance of the figures reported is also

purely indicative.

The manufacturer reserves the right to make changes to its products when considered

necessary and useful, without affecting the essential safety and operating characteristics.

CONTENTS:

INSTALLER TECHNICAL MANUAL ............................................................................................................... pg. 2

Installing the cooker - Installation information ................................................................................................. pg. 2

Height adjustable legs .................................................................................................................................... pg. 3

Backguard installation instruct ........................................................................................................................ pg. 3

Electric connection .......................................................................................................................................... pg. 3

APPLIANCE MAINTENANCE - Replacing parts ............................................................................................. pg. 4

USE AND MAINTENANCE MANUAL ............................................................................................................. pg. 4

Description of control panel and control types ................................................................................................. pg. 4-5

Using the induction hob ……………………………………………………………………………………………….. pg. 5

Hob control knob ………………………………………………………………………………………………………. pg. 5

Type of pan ………………………………………………………………………………………………………. pg. 6

Using the electric thermostat ........................................................................................................................... pg. 7

Using the 9+0 switch ....................................................................................................................................... pg. 7

Using the natural conventional electric oven .................................................................................................. pg. 7

Using the ventilated electric oven .................................................................................................................... pg. 8

Positioning the oven trays & shelves ............................................................................................................... pg. 9

Using the electric grill - ventilated electric grill ................................................................................................. pg. 9

Using the self cleaning oven .......................................................................................................................... pg. 10

Cleaning the appliance .................................................................................................................................... pg. 10

After-sales technical service and spare parts .................................................................................................. pg. 11

THIS APPLIANCE HAS BEEN DESIGNED FOR NON-PROFESSIONAL DOMESTIC USE.

INSTALLER TECHNICAL MANUAL

By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product.

The symbol on the product indicates that this product may not be treated as

household waste. Instead it shall be handed over to the applicable collection point

for the recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please

contact your local city council office.

INSTALLER INFORMATION

The installation, all adjustments, transformations and maintenance listed in this part of the manual must be

carried out only by skilled personnel.

Improper installation may cause damage to persons, animals or property, for which the manufacture will not be

held responsible.

The appliance safety or automatic adjustment devices may be changed during the service life of the system only

by the manufacturer or by the duly authorised supplier.

INSTALLING THE COOKER

After having removed the various loose parts from the internal and external packing, make sure that the cooker is not

damaged. In case of doubt, do not use the appliance and contact skilled personnel.

Keep all the dangerous packing parts (polystyrene foam, bags, cardboard, staples, etc.) away from children.

The appliance can be installed as a freestanding unit, next to a wall or inserted between two walls (Fig.1). A single

sidewall that exceeds the height of the work surface is possible. This must be at a minimum distance of 70 mm from the

edge of the cooker (Fig. 1)

Any walls of the adjacent furniture pieces and the wall behind the cooker must be made with heat-resistant material that

can withstand a minimum overtemperature of 65 K.

IMPORTANT INFORMATION FOR INSTALLING THE APPLIANCE

The cooker can be installed separately, as a freestanding unit, on a plinth, or between kitchen units or between a

kitchen unit and the wall.

If installing the appliance as a freestanding cooker, screw the height adjustable telescopic legs supplied to the

base of the appliance. If installing th screw the levelling feet supplied to the base of the e appliance on a plinth,

appliance.

This appliance is not connected to devices which exhaust combustion products.

Special attention must be focused on the prescriptions described below regarding room aeration and

ventilation. Any hanging cabinets installed above the work surface must be located at a distance of no less than

700 mm.

This appliance is not intended to be operated by means of an external timer or separate remote-control system.

HEIGHT ADJUSTABLE LEGS (Fig.2)

Legs are packed in the top box.

Legs should be installed with the appliance being near the location of final installation, they are not secure for long

transport. After unpacking the range, raise it about a foot to insert the legs in their bases assembled on the lower part of

the cooker and lower the range gently to keep any undue strain from legs and mounting hardware. It is recommended to

use a pallet or lift jack instead of tilting the unit.

BACKGUARD INSTALLATION INSTRUCTION

1) Remove n°2 screws fixing worktop as shown in fig.3

2) Place front part of the backguard and attach it from bottom side with the two removed screws (point 2) as shown in

fig .4

3) Fix the front part of the backguard with the screws supplied with the backguard kit (fig.5)

4) Assemble back part with front part of the backguard and fix them with a screws supplied with the backguard kit

(fig.6)

ANTI-TILTING CHAIN

The cooker is supplied with two chains which are connected to the rear left and right of the appliance. The chains should

be connected to the wall directly behind the chains as low as possible to prevent the appliance from tilting forward. If the

appliance is installed between two cupboards, drill a hole on each side of the cupboards, pass the chains through the

holes and anchor the chains within each cupboard. Ensure the chain connections are strong enough to support the

weight of the appliance and taught to prevent it from tilting forward.

WARNING: In order to prevent accidental tipping of the appliance, for example a child climbing onto the open oven door,

the stabilising means must be installed. Ensure the chains are correctly anchored to prevent the appliance from tilting

forward and to prevent strain on the hose when the cooker is pulled forward.

MAKE SURE THE ANTI-TILTING CHAINS ARE TAUGHT WHEN ANCHORED TO PREVENT THE APPLIANCE

TILTING.

APPLIANCE ELECTRIC CONNECTION:

The electric connection must comply with the current legal standards and regulations.

Before making the connection, check that:

- The system electrical rating and the current outlets are adequate for the maximum power output of the appliance (see

the label applied to the bottom of the casing).

- The outlet or the system is equipped with an efficient ground connection in accordance with the current legal standards

and regulations. The company will not be responsible for the non-compliance with these instructions.

When the connection to the power supply network is made using an outlet:

- If the power cord is supplied without a plug, apply a standard plug that is suitable for the load indicated on the label.

Connect the wires according to the diagram shown in FIG.7 and check that:

letter L (phase) = brown wire;

letter N (neutral) = blue wire;

ground symbol = green-yellow wire;

- The power cord must be positioned so that an overtemperature of 75 K will not be reached at any point.

- Do not use reductions, adapters or splitters since they might cause false contacts and lead to dangerous overheating.

When the connection is made directly to the electric network:

- Use a device that ensures disconnection from the mains in which the contacts are opened to a distance that permits

complete disconnection according to the conditions for over-voltage category III.

- Remember that the ground wire must not be interrupted by the circuit-breaker.

- As an alternative, the electric connection can also be protected by a high-sensitivity residual current circuit-breaker.

- It is highly recommended to attach the special green-yellow ground wire to an efficient ground system.

WARNING: If the power cord is replaced, the ground wire (yellow-green) connected to the terminal, should be

longer than the other wires by about 2 cm.

WARNING: If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a

similarly qualified person in order to avoid a hazard.

For New Zealand - This cooking range must be connected to the supply by a supply cord fitted with an appropriately

rated plug that is compatible with the socket-outlet fitted to the final sub-circuit in the fixed wiring that is intended to

supply this cooking range.

TYPES OF POWER CORDS

The appliance is equipped with a terminal for the electric connection placed behind, which is accessible removing the

posterior casing (Fig.8)

The cable of alimentation can be :

Operation at 220-240V~ : use a H05BB-F three-wire cable (cable 3x4 mm²)

Operation at 380-415V2N~ : use a H05RR-F o H07RN-F four-wire cable (cable 4x4 mm²)

Product specificaties

Merk:	Bertazzoni
Categorie:	Fornuis
Model:	X90 IND MFE BL
Soort bediening:	Draaiknop
Kleur van het product:	Blauw
Ingebouwd display:	Nee
Breedte:	895 mm
Diepte:	600 mm
Hoogte:	850 mm
Grill:	Ja
Convectie koken:	Ja
Vermogen brander/kookzone 2:	1850 W
Vermogen brander/kookzone 3:	2300 W
Vermogen brander/kookzone 1:	1400 W
Aantal branders/kookzones:	5 zone(s)
Type kookplaat:	Inductiekookplaat zones
Totale binnen capaciteit (ovens):	108 l
Voedingsbron oven:	Electrisch
Aantal ovens:	1
Aantal elektronische kook zones:	5 zone(s)
Controle positie:	Voorkant
Aangesloten lading (elektrisch):	14300 W
Stroom:	62.2 A
Hoeveelheid glazendeur panelen:	3
Totaal vermogen van de oven:	- W
Netto capaciteit oven:	108 l
Brutocapaciteit oven:	108 l
Opslag compartiment:	Ja
Vermogen brander/kookzone 4:	3200 W
Oven vermogen:	- W
Diameter brander/kookzone 1:	145 mm
Diameter brander/kookzone 2:	180 mm
Diameter brander/kookzone 3:	210 mm
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Type product:	Vrijstaand fornuis