Bertazzoni PM365S0X Handleiding

Bertazzoni Fornuis PM365S0X

Lees hieronder de 📖 handleiding in het Nederlandse voor Bertazzoni PM365S0X (16 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

(GB) INSTRUCTIONS FOR THE INSTALLATION, MAINTENANCE

pag. 2 AND USE OF FIXED HOBS WITH GAS OR MIXED SUPPLY

DIMENSIONS: (890 mm)(W) x (520 mm)(D)

Models PM36500X Type ‘A’

Models PM365S0X Type ‘B’

(FR) INSTRUCTIONS POUR L'INSTALLATION, L'ENTRETIEN ET

page. 9 L'UTILISATION DES TABLES DE CUISSON ENCASTRABLES

GAZ ET MIXTES

DIMENSION: (890 mm)(W) x (520 mm)(D)

Modeles PM36500X Type ‘A’

Modeles

PM365S0X

Type ‘B’

310543

IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE.

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

OBSERVE ALL GOVERNING CODES AND ORDINANCES.

WARNING: If the information in this manual is not followed exactly, a fire or

explosion may result causing property damage, personal injury or death.

Do not store or use gasoline or other flammable vapors and liquid in the vicinity of

this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

- Do not try to light any appliance.

- Do not touch any electrical switch.

- Do not use any phone in your building.

- Immediately call your gas supplier from a neighbor’s phone. Follow

the gas supplier’s instructions.

- If you cannot reach your gas suppliers, call the fire department.

Installation and service must be performed by a qualified installer, service agency

or the gas supplier.

Read this instruction booklet before installing and using the appliance.

The manufacturer will not be responsible for any damage to property or to persons caused by

incorrect installation or improper use of the appliance.

The manufacturer reserves the right to make changes to its products when considered necessary and useful,

without affecting the essential safety and operating characteristics.

This appliance has been designed for non-professional, domestic use only.

INFORMATION FOR THE INSTALLER

The installation, all regulations, changes and maintenance referred to in this part must only be

carried out by qualified staff.

A wrong installation can cause damage to persons, animals or things which the manufacturer cannot

be held responsible for.

The safety and automatic regulation devices on the appliances can only ever be changed by the

manufacturer or by the supplier which has been authorised to do so.

Inserting the hotplate

After having removed the various loose parts from the internal and external packing, make sure that the

hotplate in not damaged and is suitable for the specific gas usage. The gas type label is on the underside of

the hotplate base.

In case of doubt, do not use the appliance and contact skilled personnel.

Keep all the packing parts (polystyrene foam, cardboard, staples, etc.) away from children.

Consider the critical dimensions of the appliance, before making an opening in the top surface of the bench

top. (relative measurements as per Fig 1- 2).

Requirements

1. Overhead clearances (Minimum values)

The minimum overhead clearances shall be in accordance with the minimum values indicated in the table

n.1 and are shown and in the fig. 1- 2

Range hoods and exhaust fans shall be installed in accordance with the manufacturer’s instructions.

However, in no case shall the clearance between the top of the highest burner of the cooking appliance and

the range hood be less than 650mm.

Any other downward facing combustible surface less than 600mm above the top of the highest burner shall

be protected for the full width and depth of the cooking surface area.

However, in no case shall this clearance to any surface be less than 450mm.

Maximum depth for the overheads cabinet is 330mm

2. Side clearances (Minimum values)

The different side clearances shall be in accordance with the minimum values indicated in the table n.1 and

are shawn and in the ﬁg. 1- 2

The cooking surface area is defined as that part of the appliance where cooking normally takes place and

does not include those parts of the appliance containing control knobs.

Table n.1

Hobs models Type A

Type B Hobs

models

Type A

Type B

Min. Clearances (mm) Min. Clearances (mm)

L1 500 L10 870

L2 40 L11 915

L3 70 W 890

L4 457 D 520

L5 610 B1 (*) 60

L6 330 B2 (*) 152

L7 925 B3 (*) 60

L8 40 B4 (*) 152

L9 172

(*) Note:

-B1 is the min. clearance between the front edge of the appliance and the front edge of the cabinet.

-B2 and B4 are the min. clearance between the left/right side edge of the appliance and the side wall (if

present).

-B3 is the min. clearance between the back edge of the appliance and the back wall.

Attaching the hotplate

To prevent liquids from leaking accidentally into the underlying storage space, the appliance is equipped with

a special gasket. To apply this gasket, carefully follow the instructions in Fig. 3. Lay out the protective sealing

strips along the edges of the opening in the bench top and carefully overlap the strip end. (See Fig. 3). insert

the hotplate into the bench top opening. With a screwdriver assemble the brackets to the hotplate bottom by

means of the screws . (See Fig. 3A-3B). Slide the hooks into position and secure them with the screws.

Trim the part of the sealing strips which extend beyond the hotplate base

IMPORTANT INFORMATION CONCERNING THE INSTALLATION OF THE APPLIANCE

The hob can be installed by itself, in an isolated position or inserted between two kitchen units or

between one kitchen unit and a wall. Furthermore the back wall and surrounding surfaces must

resist a temperature of 65 K.

To prevent the plastic layer which covers the kitchen unit from ungluing, the glue used to join the

two surfaces together must resist temperatures of up to 150 °C

The installation of the appliance must be carried out according to the norms in force of the country

concerned and the appliance must be installed in a well ventilated place.

This appliance is not equipped with devices to remove the products of combustion. The appliance

must therefore be connected following the norms for installation mentioned above. Special attention

must be paid to the information below regarding aeration and ventilation of the premises.

Product specificaties

Merk:	Bertazzoni
Categorie:	Fornuis
Model:	PM365S0X
Apparaatplaatsing:	Ingebouwd
Soort bediening:	Draaiknop
Kleur van het product:	Roestvrijstaal
Ingebouwd display:	Nee
Breedte:	890 mm
Diepte:	520 mm
Hoogte:	69 mm
Soort materiaal (bovenkant):	Roestvrijstaal
Aantal branders/kookzones:	5 zone(s)
Type kookplaat:	Gaskookplaat
Electronische ontsteking:	Ja
Makkelijk schoon te maken:	Ja
Aantal gaspitten:	5 zone(s)
Aantal elektronische kook zones:	0 zone(s)
Sudder brander/kookzone:	1750 W
Normale brander/kookzone:	1750 W
Controle positie:	Boven voorzijde
Installatie compartiment breedte:	860 mm
Installatie compartiment diepte:	500 mm
Grote brander/kookzone:	3000 W
Aangesloten lading (gas):	5000 W
Extra grote hoge-snelheid kookzone:	5000 W
Wokbrander:	Ja