BeamZ WH-248 Handleiding
BeamZ
Effect machine
WH-248
Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ WH-248 (8 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
V2.2
Ref. No.: 150.672
WH-248 LED WASH
24X 8W QUAD DMX
MANUAL
- 2 -
Thank you for purchasing one of our products. Before you use this product please read these instructions
carefully to enjoy optimal performance and a longer service life.
UNPACKING INSPECTIONS
Unpacking instructions
Please unpack the carton and check the goods carefully when you receive it , if you discover any
packing damage, shortage or quality problems, please notify the shipper and reject the goods.
Before using this product, please read the instructions carefully and store them in a safe place for
future reference.
SAFETY INSTRUCTIONS
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Never put tiny metal objects such as a screwdriver, iron wire, etc. into this product in case of a short
circuit .
Please make sure that the voltage of the outlet to which you are connecting this product is within
the range stated on the decal or rear panel of the product.
Avoid physical damage to the product during transportation. Never carry this product from the
power cord or any moving part . Always use the hanging / mounting bracket or the handles.
This product is for indoor use only. To avoid risk of re or shock, do not expose this product to rain
or moisture.
Never pull or tug on the cord and change it for another one, stop using it when it is damaged or
becomes hot .
Stop using the product once there are sparks when connecting it to the power socket.
Do not operate this product with wet hands and never place it near water or any other liquids.
Make sure there are no ammable materials close to the unit while operating. Always install it in a
location with adequate ventilation.
When the original lightning source is damaged, do not replace it with a lightning source which has
dierent specications and rating s.
Always disconnect this product from the power source before replacing the light source or the fuse.
The maximum ambient temperature is 40°C(104°F).
Never clean the unit with water, thinner or any other dissolving agent .
Stop using the product in case of a serious operating problem and send it to our maintenance agent
immediately. Never get this product repaired by non-professional workers.
Avoid direct eye exposure to the light source while this product is on.
Never clean the xture by water, thinner or other dissolved agent .
Stop using the product in case of a serious operating problem and send it to our maintenance agent
immediately. Never repair by non-professional workers .
Avoid direct eye exposure to the light source while the product is on.
- 3 -
SPECIFICATION
Tilt movement:
220° manually
No. of LEDs:
24x 8W Quad LEDs
No. of patterns:
10
DMX channels:
1-4-8
IP Rating ”:
IP65
Power Supply:
220-240Vac / 50Hz
Consumption:
230W
MAINTENANCE
The unit should be cleaned periodically to ensure the optimal performance, smudginess can decrease the
life of the light source and the output of light is aected by the dust which can make the machine overheat.
It is advised to perform maintenance 2 times a month. Be sure to disconnect the unit from the power socket
before cleaning.
Do not clean until the unit recovers a normal temperature, use the lens tissue or soft cotton cloth with
alcohol and wipe gently.
The cleaning frequency depends on the environment in which this unit operates, damp, smoky or dirty
surroundings can cause greater accumulation of dirt on the optics. Never rub or press strongly on the panel.
FUNCTIONS INTRODUCTIONS
Main Functions
1, 4 or 8 DMX channels.
DMX, auto and master/slave mode .
24x 8W Quad LEDs
10 Built-in programs
Electronic dimming 0 100% –
Product specificaties
Merk: | BeamZ |
Categorie: | Effect machine |
Model: | WH-248 |
Kleur van het product: | Zwart |
Aantal lampen: | 24 lampen |
Soort lamp: | LED |
Vermogen lamp: | 8 W |
Stroombron: | AC |
Ingangsspanning: | 220 - 240 V |
Frequentie: | 50 Hz |
Stralingshoek: | 25 ° |
Stroomverbruik (typisch): | 230 W |
Baldiameter: | - " |
Aantal DMX-kanalen: | 8 kanalen |
Heb je hulp nodig?
Als je hulp nodig hebt met BeamZ WH-248 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Effect machine BeamZ
2 November 2024
29 Augustus 2024
25 Juli 2024
25 Juli 2024
25 Juli 2024
25 Juli 2024
24 Juni 2023
15 Juni 2023
10 Juni 2023
10 Juni 2023
Handleiding Effect machine
- Effect machine Behringer
- Effect machine Boss
- Effect machine HQ
- Effect machine HQ Power
- Effect machine Konig
- Effect machine Manta
- Effect machine Martin
- Effect machine Max
- Effect machine Midas
- Effect machine Monacor
- Effect machine Nedis
- Effect machine Pyle
- Effect machine Showtec
- Effect machine Velleman
- Effect machine Viking
- Effect machine Westinghouse
- Effect machine JB Systems
- Effect machine Monoprice
- Effect machine NGS
- Effect machine Steren
- Effect machine Eurolite
- Effect machine American DJ
- Effect machine Antari
- Effect machine Chauvet
- Effect machine QTX
- Effect machine Valcom
- Effect machine Karma
- Effect machine Adj
- Effect machine Elation
- Effect machine Valueline
- Effect machine Fredenstein
- Effect machine TC Electronic
- Effect machine Elysia
- Effect machine Stairville
- Effect machine Black Lion Audio
- Effect machine Laserworld
- Effect machine TCM FX
- Effect machine Drawmer
- Effect machine ColorKey
- Effect machine Evo-Lite
- Effect machine Blizzard
- Effect machine Hazebase
- Effect machine IGS Audio
- Effect machine Cameo
- Effect machine Sagitter
- Effect machine DJPower
- Effect machine Doepfer
- Effect machine Fun Generation
- Effect machine Lotronic
- Effect machine IMG Stage Line
- Effect machine Lexicon
- Effect machine Futurelight
- Effect machine The Confetti Maker
- Effect machine Eliminator Lighting
- Effect machine BoomTone DJ
- Effect machine Klark Teknik
- Effect machine Lab Gruppen
- Effect machine Audibax
- Effect machine Magmatic
- Effect machine Technical Pro
- Effect machine Rosco
- Effect machine Showven
Nieuwste handleidingen voor Effect machine
30 November 2024
20 November 2024
19 November 2024
16 November 2024
15 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024
7 November 2024