BeamZ Sway Gobo Handleiding

BeamZ Effect machine Sway Gobo

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ Sway Gobo (28 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

Sway Gobo

Ref. nr.: 153.723

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.0

ENGLISH

Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to

benefit fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the unit is switched on for the first time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the product on. Contact your dealer.

Do NOT connect the product to a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the product in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the product with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

effect at least 50cm away from inflammable material and

leave at least 1 meter space on every side to ensure

sufficient cooling.

- rThis p oduct contains high intensity LEDs. Do not look

into the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Only operate the product with clean hands.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualified technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product off prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains vo 240Vac/50Hz. Check if power ltage is 220-

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic

attacks should be aware of the effects that this light effect may have on them.

The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate

and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

Specifications can be changed without prior notice.

prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. cannot be held responsible for personal injuries caused by a disrespect of the safety Beamz

recommendations and warnings. This is also applicable to all damages in whatever form.

LASERSAFETY

Laser Light is different from any other light source with which you may be familiar. The light from this product can potentially

cause eye injury if not set up and used properly. Laser light is thousands of times more concentrated than light from any other

kind of light source. This concentration of light power can cause instant eye injuries, primarily by burning the retina (the light

sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser beam, it can still potentially injure or blind

you or your audience. Even very small amounts of laser light are potentially hazardous even at long distances. Laser eye

injuries can happen quicker than you can blink.

It is wrong to assume that a single beam of a bundle of hundreds by the laser beams made, it cannot cause injury.

It is also incorrect to assume that it is safe to look at a moving beam. In the laser safety regulation, it is not legal to aim Class

3B/4 lasers in areas which people can get exposed also on a dance floor.

Caution:

• Do not point lasers at people or animals.

• Never look into the laser aperture or laser beams his can potentially cause instant eye injury or blindness if laser light, t

directly strikes the eyes.

• Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.

• Install the laser units such that laser beams above the audience move See section later in this manual.

• Test the laser units always first before the public is present.

• Do not point lasers into the public or at highly reflective surfaces such as windows, mirrors and shiny metal. Even laser

reflections can be hazardous.

• Never point a laser at aircraft or into the sky his is a federal offense , t .

• Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous

radiation exposure.

• Do not expose the output optic (aperture) to cleaning chemicals.

• The operation of a laser is only allowed if the show is controlled by a skilled and well trained operator familiar with the -

requirements that are needed.

• Do not use laser if housing is damaged or open, or if optics appear damaged in any way.

• Never leave this device running unattended.

• Always use appropriate lighting safety cables when hanging lights and effects overhead.

The legal requirements for using laser entertainment products vary from country to country. The user is responsible for the leg al

requirements at the location/country of use.

This unit laser components with high power, live parts and parts that emit radiation. Therefore, contains DO NOT

OPEN the housing, THIS CAN BE FATAL. It can also cause blindness, skin burns and fires.

Eye damage occurs faster than you can blink your eyes.

Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of

Lasers”, available from “www.laserinstitute.org”. Many local governments, corporations, agencies, military and others, require all

lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the International Laser

Display Association, www.laserist.org.

Attention! The use in France is only allowed to the professional user and not to the end

user. See decision: www.legifrance.gouv.fr

Read for the commissioning of the laser all safety instructions and

technical data of this manual carefully and thoroughly.

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	Sway Gobo
Kleur van het product:	Zwart
Gewicht:	2100 g
Diepte:	120 mm
Hoogte:	160 mm
Soort lamp:	LED
Stroombron:	AC
Afstandsbediening:	IR
Aanpasbare snelheid:	Ja
Laser klasse:	3R
Kleur licht:	Blue, Green, Red, White
Geschikt voor gebruik binnen:	Ja
Afstandsbediening inbegrepen:	Ja
Stroomverbruik (typisch):	25 W
Type product:	Discostroboscoop
Verlichtingsmodi:	Auto
Baldiameter:	- "
Vermogen lasergolf (rood):	150 mW
Gobopatronen aantal:	1