BeamZ Skytec 151.725 Handleiding

BeamZ Effect machine Skytec 151.725

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ Skytec 151.725 (16 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

DISCO SET I II

151.725 / 151.727

Instruction Manual

Gebruiksaanwijzing

Mode d’Emploi

Gebrauchsanleitung

Brugsanvisning

GENERAL SAFETY RECOMMENDATIONS

- Please read this manual prior to using the unit.

- Keep the manual for further reference.

- Keep the original packaging to ensure safe transport of the unit.

- For indoor use only in dry premises.

- Ensure that there is sufﬁcient cooling around the unit.

- Do not use the unit near heat sources or in direct sunlight.

- If the plug or mains lead are damaged, they need to be repaired by a qualiﬁed technician.

- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a

- mains outlet.

- Make sure that no small objects or liquids enter the housing.

- Clean the unit only with a damp cloth. Do not use detergents or solvents!

- Other than those speciﬁed in the manual, . the unit doesn’t contain any user serviceable parts

- Repairs should only be carried out by an authorized SkyTronic repair service.

- FIRE HAZARD: install the mirror ball and motor at least 0.5m away from inﬂammable materials

(e.g. decoration objects, etc.)

- DANGER: Prior to first using the mirror ball motor combination, the installation must be check –ed

by a specialist.

- The mounted units need to be checked regularly and at least once a year by a specialist.

- Regularly check the chain between the motor and the mirror ball including the anchorage points in

the motor and the ball.

- Use strong materials for the mounting of the motor.

General Description

The complete Disco lighting set includes:

- Mirror ball (20cm for the set ref. no. 151.725 30cm for the set ref. no.151.727) ,

- Mirror ball motor

- PAR36 spot light with colour wheel

MIRROR BALL MOTOR

INSTALLATION:

NOTE: Follow the instructions carefully and use your brains when mounting the motor and mirror ball.

A falling mirror ball can cause serious injuries!!

- The installation must be done in such a way that it can support 10 times the weight of the

mirror ball for at least 1 hour without showing any distortion.

- The motor needs to be installed perfectly horizontally. Check the position with a level. The

battery-powered version can be hung vertically.

- Motor and mirror ball must be installed out of the reach of persons.

- Use all screw openings in the housing.

- Use a chain of suﬃcient strength for the installation of the mirror ball below the motor. The

supplied chains are made to the load of the motor.

- Connect the assembly to an earthed wall outlet.

MIRROR BALL

INSTALLATION IN PRIVATE PREMISES

- WARNING: A falling mirror ball can cause serious injuries!

- A mirror ball is meant to create decorative light eﬀects in combination with an appropriate light

source.

- ATTENTION!! Mirror balls need to be installed by a professional according to the European

standard EN60598.

- The installation that supports the mirror ball (including the motor) needs to be able to carry

during 1 hour 5 times the weight of the mirror ball without showing visible distortion.

- Use a chain of suﬃcient strength to link the motor to the mirror ball. Do not use steel cable

that might fray due to the torsion.

- Big mirror balls need to be secured by a safety net.

- The mounted motor and mirror ball assembly needs to be checked regularly, and at least once

a year by a professional.

- Check regularly the chain between the motor and the mirror ball, including the fixing points on

the motor and the ball.

INSTALLATION IN PUBLIC PREMISES

- WARNING: Mirror balls need to be installed according to the European standard EN60598-2-7

and the standards which are applicable in the different countries. The installation might only

be done by a professional installer!

- The installation that supports the mirror ball (including the motor) needs to be able to carry

during 1 hour 10 times the weight of the mirror ball without showing visible distortion.

- The installation needs to be secured by a safety net so that no parts can fall down.

- IMPORTANT! THE INSTALLATION OF LIGHT EFFECTS REQUIRES EXPERIENCE and

knowledge of load calculations, installation materials, periodic safety checks, etc. Leave the

installation to a professional if you don’t have the required knowledge and experience. A

wrong installation might cause serious injuries and material damages.

- Use a chain of suﬃcient strength for the link between the motor and the mirror ball. Do not use

steel cable that can fray under the torsion.

- DANGER: Prior to the ﬁrst use of the motor and mirror ball assembly, the installation needs to

be checked by a professional.

- The motor and mirror ball assembly needs to be checked regularly by a professional.

- Check regularly the chain between the motor and the mirror ball, including the ﬁxing points on

the motor and the mirror ball.

PAR36 SPOT WITH COLOUR WHEEL

Installing/replacing the lamps

Before replacing the lamp, unplug mains lead and let the lamp cool down. Please follow the lamp

manufacturer’s notes when installing.

- You need one 6V 30W Par 36 Lamp for installation.

- Please remove the fixation ring by pressing it together.

- If replacing the lamp, remove the old lamp from the pin s and loosen the wires. pot

- Loosen the screws on the new 6V 30W Par 36 lamp with an appropriate screwdriver.

- Connect the wires with the lamp using an appropriate screwdriver.

- Tighten the screws.

- Insert the lamp in the housing.

- Fix the lamp with the fixation ring.

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	Skytec 151.725
Kleur van het product:	Black, Blue, Green, Red, Yellow
Vermogen lamp:	30 W
Stroombron:	AC
Ingangsspanning:	230 V
Kleur licht:	Blue, Green, Red, Yellow
Frequentie:	50 Hz
Baldiameter:	200 "