BeamZ MHL810 Handleiding

BeamZ Effect machine MHL810

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ MHL810 (48 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/48

MHL810 Doublesweeper 8x10W

Ref. nr.: 150.300

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.2

ENGLISH

Congratulations to the purchase of this Beamz . Please read this manual thoroughly prior to using the in order to beneﬁt product product

fully from all features.

Read the manual prior to using the . Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid product

ﬁre and/or electrical shock. Repairs must only be carried out by a qualiﬁed technician in order to avoid electrical shock. Keep the

manual for future reference.

- productPrior to using the , please ask advice from a

specialist. When the unit is switched on for the ﬁrst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do NOT

open the housing.

- product. Do not place metal objects or pour liquids into the

This may cause electrical shock and malfunction.

- product Do not place the near heat sources such as

radiators, etc. Do not place the unit on a vibrating surface.

Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- product When unplugging the from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they need to

be replaced by a qualiﬁed technician.

- product If the is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the on. Contact your dealer. Do product

NOT connect the a rheostat or dimmer.product to

- To avoid ﬁre and shock hazard, do not expose the product

to rain and moisture.

- All repairs should be carried out by a qualiﬁed technician

only.

- product Connect the to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10 16A f- use.

- product During a thunderstorm or if the will not be used for a

longer period of time, unplug it from the mains. The rule is:

Unplug it from the mains when not in use.

- product If the has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the product

in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- product Secure the with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make sure

nobody stands in the mounting area. Mount the eﬀect at

least 50cm away from inﬂammable material and leave at

least 1 meter space on every side to ensure suﬃcient

cooling.

- This poduct contains high intensity LEDs. Do not look into

the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave the

unit unattended.

- Do not use cleaning sprays to clean switches. The residues

of these sprays cause deposits of dust and grease. In case

of malfunction, always seek advice from a specialist.

- product Only operate the with clean hands.

- Do not force the controls.

- product If the has fallen, always have it checked by a

qualiﬁed technician before you switch the t on again.produc

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the with a dry cloth.product

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- product Switch the oﬀ prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables prior to

moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use for

damages and faults!

- -The mains voltage is 220 240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains voltage

of the country is suitable for this product.

- Keep the original packing material so that you can transport

the product in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of suﬃcient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read

and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the eﬀects that this light eﬀect may have on them.

The product has been certiﬁed CE. It is prohibited to make any changes to the . They would invalidate the CE certiﬁcate and product

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41 and °F

35°C/ °F95 .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The speciﬁcations are typical. The actual values can slightly change from one unit to the other.

Speciﬁcations can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the be returned in the original product

factory box and packing.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the is indicated on this type of power supply must be connected. Check that the mains product

voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The must also product

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the to a protected circuit (circuit breaker or fuse). Make sure the has an appropriate device device

electrical ground to avoid the risk of electrocution or fire.

INSTALLATION

Attention:

• The installation of the product has to be built and constructed in a way that it can hold 10 times the weight for 1 hour

without any harming deformation.

• The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This

secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main

attachment fails.

• - Make sure the area below the installation place is free from unwanted persons during rigging, de rigging and servicing.

• - - The operator has to make sure that safety relating and machine technical installations are approved by an expert

before taking into operation for the first time and after changes before taking into operation another time.

• - -The operator has to make sure that safety relating and machine technical installations are approved by a skilled

person once a year.

• The fixture should be installed in the position where persons cannot reach and where persons may walk by or be

seated.

CAUTION: Please consider the respective national norms during the

installation! The installation must only be carried out by an

authorized employee or dealers!

CAUTION:

When installing the device, make sure there is no highly in

inflammable material (decoration articles, etc.) in between a

distance of min 20inch / .5 meter. 0

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	MHL810
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	5000 g
Breedte:	400 mm
Diepte:	240 mm
Hoogte:	140 mm
Vermogen lamp:	10 W
Stroombron:	AC
Aantal kleuren:	8 kleuren
Ingangsspanning:	100 - 240 V
Aanpasbare snelheid:	Ja
Frequentie:	50 Hz
Geschikt voor gebruik binnen:	Ja
Stralingshoek:	4 °
Type product:	Discolaserprojector
Type beeldscherm:	LED
Verlichtingsmodi:	DMX, Stand-alone
Baldiameter:	- "
Aantal DMX-kanalen:	36 kanalen
Verstelbare gevoeligheid:	Ja
Gezichtsveld:	8 °