BeamZ S2000 Handleiding

BeamZ Verlichting S2000

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ S2000 (20 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

Ref. Nr. 160.500

SMOKE MACHINE 24X 3W 3-IN-1 LEDS

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUEL D'INSTRUCTIONS

V1.5

- 2 -

- 3 -

ENGLISH

Warning:

- The smokemachine must be placed at least 100 cm away from inflammable materials such as curtains,

books, etc. Make sure that the housing cannot be touched by accident.

- For indoor use only.

- During installation, nobody should stand beneath the mounting area.

- Prior to the first use, have the unit checked by a qualiﬁed person.

- The unit contains voltage carrying parts. DO NOT open the smokemachine

- Never plug or unplug the unit with wet hands.

- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.

- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains

outlet. It needs to be repaired by a qualified technician.

- Only connect this unit to an earthed mains outlet of 230Vac/50Hz .

- Always unplug the unit during a thunderstorm or when it is not in use.

- If the unit has not been used for a longer period of time, condensation can occur inside the housing.

Please let the unit reach room temperature prior to use.

- When you unplug the unit from the mains always pull the plug, never the lead.

- In order to prevent dropping of the unit, a safety fastening needs to be installed. This can be a solid

chain, a steel cable, etc. which has to be fastened separately from the mounting bracket.

- The supplied bracket is the main fixing and must be used to solidly mount the light effect.

- In order to avoid accidents in public premises, the local legal requirements and safety

regulations/warnings must be fulfilled.

- Keep out of the reach of children.

Safety

Plug the smoke machine only in an earthed mains outlet or extension cord! ATTENTION: the powercord can

only be replaced by an original replacement, supplied by Tronios.

Be careful when filling the fluid tank. First of all, unplug the mains lead! Then unscrew the cap on the tank and

fill it by means of a funnel.

Only use the original Beamz smoke fluid which is environmental friendly and, if used correctly, leaves no

residues.

Do not obstruct the openings on top of the case to guarantee a good ventilation. The heating element of the

smoke machine generates heat which needs to be removed. Don’t put any objects on the smoke machine.

Installation and Use

Unpack the fog machine. Do not connect yet the net cable. Connect the lead of the manual control with the 3-

pin plug at the rear of the smoke machine. Fill the fluid tank by means of he remote control a funnel. Connect t

with the Remote Control-socket. Plug the unit into a mains outlet. The heating element is automatically switched

on. Depending on the room temperature, it takes about 8 minutes until the working temperature is reached,

during this time the display shows “Warming Up”. When the machine is ready for fogging, the display shows

"Ready To Fog".

The remote interface allows to customize fog machine functions by adjusting fogging volume, duration, interval

and LED color.

Remote control:

Product specificaties

Merk:	BeamZ
Categorie:	Verlichting
Model:	S2000
Kleur van het product:	Grijs
Gewicht:	7900 g
Snoerlengte:	4 m
Vermogen:	2000 W
Afstandsbediening:	Bedraad
Op afstand bedienbaar:	Ja
Opwarmtijd:	4 min
Productafmetingen (B x H x D):	450 x 310 x 210 mm
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 Hz
Vloeistoftank capaciteit:	2.5 l
Hoeveelheid rook uitstoot:	530 m³/min
Bedrijfsvloeistof:	Water