BeamZ Mimas Handleiding

BeamZ Effect machine Mimas

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ Mimas (40 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/40

Beam Series

Ref. nr.: 152.800; 152.803; 152.806; 152.809; 152.812

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCION ES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.1

ENGLISH

Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to

beneﬁt fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid ﬁre and/or electrical shock. Repairs must only be carried out by a qualiﬁed technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the unit is switched on for the ﬁrst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualiﬁed technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the product on. Contact your dealer.

Do NOT connect the product to a rheostat or dimmer.

- To avoid ﬁre and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualiﬁed technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the product with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

eﬀect at least 50cm away from inﬂammable material and

leave at least 1 meter space on every side to ensure

suﬃcient cooling.

- This product contains high intensity LEDs. Do not look

into the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and oﬀ. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Only operate the product with clean hands.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualiﬁed technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product oﬀ prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- ep the original packing material so that you can Ke

transport the product in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of suﬃcient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic

attacks should be aware of the eﬀects that this light eﬀect may have on them.

The product has been certiﬁed CE. It is prohibited to make any changes to the product. They would invalidate the CE certiﬁcate

and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The speciﬁcations are typical. The actual values can slightly change from one unit to the other.

Speciﬁcations can be changed without prior notice.

prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

LASERSAFETY

Laser Light is diﬀerent from any other light source with which you may be familiar. The light from this product can potentially

cause eye injury if not set up and used properly. Laser light is thousands of times more concentrated than light from any other

kind of light source. This concentration of light power can cause instant eye injuries, primarily by burning the retina (the light

sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser beam, it can still potentially injure or blind

you or your audience. Even very small amounts of laser light are potentially hazardous even at long distances. Laser eye

injuries can happen quicker than you can blink.

It is wrong to assume that a single beam of a bundle of hundreds by the laser beams made, it cannot cause injury.

It is also to assume that it is safe to look at a moving beam. In the laser safety regulation, it is not legal to aim Class incorrect

3B/4 lasers in areas which people can get exposed also on a dance ﬂoor.

Caution:

 Do not point lasers at people or animals.

 Never look into the laser aperture or laser beams his can potentially cause instant eye injury or blindness if laser light , t

directly strikes the eyes.

 Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.

 Install the laser units such that laser beams above the audience move See section later in this manual.

 Test the laser units always ﬁrst before the public is present.

 Do not point lasers into the public or at highly reﬂective surfaces such as windows, mirrors and shiny metal. Even laser

reﬂections can be hazardous.

 Never point a laser at aircraft or into the sky, this is a federal oﬀense.

 Use of controls or adjustments or performance of procedures other than those speciﬁed herein may result in hazardous

radiation exposure.

 Do not expose the output optic (aperture) to cleaning chemicals.

 The operation of a laser is only allowed if the show is controlled by a skilled and well-trained operator familiar with the

requirements that are needed.

 Do not use laser if housing is damaged or open, or if optics appear damaged in any way.

 Never leave this device running unattended.

 Always use appropriate lighting safety cables when hanging lights and eﬀects overhead.

The legal requirements for using laser entertainment products vary from country to country. The user is responsible for the leg al

requirements at the location/country of use.

This unit contains laser components with high power, live parts and parts that emit radiation. Therefore, DO NOT

OPEN the housing . It can also cause blindness, skin burns and ﬁres. , THIS CAN BE FATAL

Eye damage occurs faster than you can blink your eyes.

Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of

Lasers”, available from “www.laserinstitute.org”. Many local governments, corporations, agencies, military and others, require all

lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the International Laser

Display Association, www.laserist.org.

ENGLISH : Attention! The use in France is only allowed to the professional user and not

to the end user. See decision: www.legifrance.gouv.fr

Read for the commissioning of the laser all safety instructions and

technical data of this manual carefully and thoroughly.

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	Mimas
Kleur van het product:	Zwart
Gewicht:	1450 g
Breedte:	245 mm
Diepte:	200 mm
Hoogte:	75 mm
Stroombron:	AC
Afstandsbediening:	IR
Ingangsspanning:	100 - 240 V
Aanpasbare snelheid:	Ja
Laser klasse:	3B
Frequentie:	50 - 60 Hz
Geschikt voor gebruik binnen:	Ja
Afstandsbediening inbegrepen:	Ja
Type product:	Discolaserprojector
Verlichtingsmodi:	DMX, Stand-alone
Baldiameter:	- "
Laser-golflengte (groen):	532 nm
Vermogen lasergolf (groen):	50 mW
Aantal DMX-kanalen:	8 kanalen
Verstelbare gevoeligheid:	Ja