BeamZ Light Package 2 Handleiding

BeamZ Effect machine Light Package 2

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ Light Package 2 (18 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

Light Package 2

Multipoint Laser G-50mW R- 80mW

LED Moon Flower sound controlled

Ref. Nr. 153.780

Instruction Manual

Gebruiksaanwijzing

Mode d’Emploi

Gebrauchsanleitung

2 — —

Multipoint Laser G-50mW R-80mW

User’s manual

Thanks for your purchasing, please read this manual carefully before operating the system. It gives you general information

for your safe and better operation.

Installation

 Firstly, be sure that the using voltage is match with the

voltage marked on the base of the laser;

 Installation should be made by professional technician.

fix the laser lighting and adjust the angle of the moving

head to you need;

 Be sure that there is no flammable or explosive subject

nearby. The least distance is 0.5 meters. at the same

time, keep more than 15cm between the wall and laser

lighting;

 Please check whether the fan and the exhaust is blocked;

 There is a hole for connection. when hang the laser lighting,

be sure the cable can undertake 10 times of the lighting

weight;

 The laser lighting should be fixed;

 It is essential to be earthed well for the sake of safety.

WARNING DATA

Lasers can be hazardous and have unique safety

considerations. Permanent eye injury and blindness

is possible if lasers are used incorrectly. Pay close

attention to each safety REMARK and WARNING

statement in the user manual. Read all instructions

carefully BEFORE operating this device.

Indicates a skill or other useful information for

special situations.

Indicates important information to protect

personnel from laser incident or injury.

Prevent damage or injury from incorrect operation.

Laser safety warming labels.

To protect the environment, recycle packing

material wherever possible.

The projector is for indoor use only, IP20. Use

only in dry locations. Keep this device away

from rain and moisture, excessive heat,

humidity and dust. Do not allow contact with

water or other fluids.

Don’t throw this product away just as general trash,

please dispose of this product following the abandon

electronic product regulations in your area.

The projector must be installed in a location with adequate

ventilation, at least 50cm (20 inches) from adjacent

surfaces. Be sure that no ventilation slots are blocked.

 Avoid direct eye contact with laser light. Never

intentionally expose your eyes or others to direct laser

light..

 This laser product can potentially cause instant eye

injury or blindness if laser light directly strikes the eyes.

 It is illegal and dangerous to shine this laser into

audience areas, where the audience or other personnel

could get direct laser beams or bright reflections into

their eyes.

 It is an offense to shine any laser at aircraft.

 There are no user serviceable parts inside the unit. Do

not open the housing or attempt any repairs yourself. In

the unlikely event your unit may require service, please

contact the dealer nearest to you..

 Use of controls or adjustments or performance of

procedures other than those specified herein may result

in hazardous radiation exposure.

NON-INTERLOCKED HOUSING WARNING

This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe

levels of laser radiation. The laser power levels accessible if the unit is opened can cause instant blindness, skin burns and

fires.

3 — —

LASER SAFETY AND OPERATING INSTRUCTIONS

STOP AND READ ALL LASER SAFETY DATA

Laser Light is different from any other light source with which you may be familiar. The light from this product can potentially

cause eye injury if not set up and used properly. Laser light is thousands of times more concentrated than light from any other

kind of light source. This concentration of light power can cause instant eye injuries, primarily by burning the retina (the light

sensitive portion at the back of the eye). or blind Even if you cannot feel “heat” from a laser beam, it can still potentially injure

you or your audience. Even very small amounts of laser light are potentially hazardous even at long distances. Laser eye

injuries can happen quicker than you can blink. It is incorrect to think that because these laser entertainment products split

the laser into hundreds of beams or laser beam is scanned out in high speed, that an individual laser beam is safe for eye

exposure. This laser product uses dozens of mini Watts of laser power (Class 3B levels internally). Many of the individual

beams are potentially hazardous to the eyes. It is also incorrect to assume that because the laser light is moving, it is safe.

This is not true. Nor, do the laser beams always move. Since eye injuries can occur instantly, it is critical to prevent the

possibility of any direct eye exposure. In the laser safety regulation, it is not legal to aim Class 3B lasers in areas which

people can get exposed. This is true even if it is aimed below people’s faces, such as on a dance floor.

 Do not operate laser without first reading and

understanding all safety and technical data in this

manual

 Always set up and install all laser effects so that all

laser light is at least 3 meters (9.8 feet) above the

floor on which people can stand. See “Proper Laser

Set- on later in this manual up & Usage” secti

 After set up, and prior to public use test laser to ensure

proper function. Do not use if any defect is detected. Do

not use if laser emits only one or two laser beams rather

than dozens/hundreds, as this could indicate damage

to the diffraction grating optic, and could allow emission

of higher laser levels.

 Do not point lasers at people or animals

 Never look into the laser aperture or laser beams

 Do not point lasers in areas in which people can

potentially get exposed, such as uncontrolled balconies,

etc.

 Do not point lasers at highly reflective surfaces such as

windows, mirrors and shiny metal. Even laser

reflections can be hazardous.

 Never point a laser at aircraft, this is a federal offense

 Never point un-terminated laser beams into the sky

 Do not expose the output optic (aperture) to cleaning

chemicals

 Do not use laser if the laser appears to be emitting only

one or two beams

 Do not use laser if housing is damaged or open, or if

optics appear damaged in any way.

 Never open the laser housing. The high laser power

levels inside of the protective housing can start fires,

burn skin and will cause instant eye injury.

 Never leave this device running unattended.

 The operation of a class 3B laser show laser is only

allowed if the show is controlled by a skilled and

well-trained operator familiar with the data included in

this manual.

 The legal requirements for using laser entertainment

products vary from country to country. The user is

responsible for the legal requirements at the

location/country of use.

 Always use appropriate lighting safety cables when

hanging lights and effects overhead

 Power off before installation or maintenance

 The danger class of this laser lighting is CLASS IIIB.

 It’s dangerous for observing laser. The safe minimum

distance is 13cm,the safe maximum time is 10 seconds

 Keep at least 0.5 meters distance between the lighting

and flammable material

LASER SAFETY LABEL REPRODUCTIONS

Caution Class LASER RADIATION, WHEN OPEN, AVOID EXPOSURE TO BEAM –3B

LASER RADIOATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT.

The label indicates the laser beam output aperture.

LASER EXPOSURE WARNING

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	Light Package 2
Kleur van het product:	Zwart
Gewicht:	2500 g
Aantal lampen:	120 lampen
Soort lamp:	LED
Stroombron:	AC
Ingangsspanning:	230 V
Kleur licht:	Amber, Blue, Green, Red, White
Frequentie:	50 Hz
Baldiameter:	- "