BeamZ FlatPAR 151.281 Handleiding

BeamZ Effect machine FlatPAR 151.281

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ FlatPAR 151.281 (12 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

LED FlatPAR-186x10mm RGBW, DMX

Ref. nr.: 151.281

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

V1.0

ENGLISH

Congratulations to the purchase of this Beamz light effect. Please read this manual thoroughly prior to using the unit in

order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all

precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to

avoid electrical shock. Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the first

time, some smell may occur. This is normal and will

disappear after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it.

A faulty or damaged mains lead can cause electrical

shock and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the unit to a rheostat or

dimmer.

- To avoid fire and shock hazard, do not expose the

unit to rain and moisture.

- All repairs should be carried out by a qualified

technician only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used

for a longer period of time, unplug it from the mains.

The rule is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of

time, condensation may occur. Let the unit reach

room temperature before you switch it on. Never use

the unit in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do

not touch it during operation and immediately after.

- To prevent accidents in companies, you must follow

the applicable guide lines and follow the instructions.

- Secure the unit with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make

sure nobody stands in the mounting area. Mount the

effect at least 50cm away from inflammable material

and leave at least 1 meter space on every side to

ensure sufficient cooling.

- This unit contains high intensity LEDs. Do not look

into the LED light to prevent damage to your eyes.

- Do not repeatedly switch the fixture on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not

leave the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice

from a specialist.

- Only operate the unit with clean hands.

- Do not force the controls.

- If the unit has fallen, always have it checked by a

qualified technician before you switch the unit on

again.

- Do not use chemicals to clean the unit. They damage

the varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise

serious damage and/or dangerous radiation may

occur.

- Switch the unit off prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the unit.

- Make sure that the mains lead cannot be damaged

when people walk on it. Check the mains lead before

every use for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if

power outlet match. If you travel, make sure that the

mains voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the effects that this light effect may have on them.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and

35°C/95°F. 

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your

local authorities or your dealer about the way to proceed.

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	FlatPAR 151.281
Kleur van het product:	Zwart
Gewicht:	1100 g
Breedte:	218 mm
Diepte:	72 mm
Hoogte:	218 mm
Aantal lampen:	186 lampen
Soort lamp:	LED
Stroombron:	AC
Ingangsspanning:	230 V
Kleur licht:	Blue, Green, Red, White
Frequentie:	50 Hz
XLR in:	Ja
XLR out:	1
Stroomverbruik (typisch):	45 W
Dimmer voor de lichtintensiteit:	Ja
Baldiameter:	- "
Aantal DMX-kanalen:	7 kanalen