BeamZ Disco Set IV 151.730 Handleiding

BeamZ Effect machine Disco Set IV 151.730

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ Disco Set IV 151.730 (16 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Disco Set IV:
Bubble Machine, LED Strobe and Mirror Ball with Motor
Ref: 151.730
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
BUBBLE MACHINE
SAFETY INSTRUCTIONS
1. When using electrical appliances, basic safety precautions should always be followed.
2. Do not immerse the appliance in water or any other liquids (apart from the bubble making liquid that should only
be put in the front compartment).
3. Close supervision is required when using this appliance near children.
4. Never leave the appliance within reach of children.
5. Repairs to electrical appliances should only be performed by a qualified electrician. Improper repairs may place
the user at serious risk.
6. This appliance is intended for household use only and should not be used for industrial purposes.
7. Do not use this appliance for anything other than its intended use.
BATTERY SAFETY
Always:
• Ensure the battery compartments are secure.
• Only use the batteries recommended.
• Ensure correct fit of batteries, observing the plus and minus marks on both the battery and the compartment.
• Replace a full set of batteries in their packaging and keep away from metal objects that may cause a short circuit.
• Remove dead batteries from equipment.
• Remove batteries from appliances that will not be used again for a long time.
• Supervise children with batteries at all times.
• Remember to keep small batteries away from small children as they can be easily swallowed.
• Seek immediate medical attention if batteries are swallowed.
Never:
• Mix old and new batteries.
• Mix different types of batteries.
• Dispose of batteries in a fire.
• Attempt to recharge ordinary batteries.
INSTRUCTIONS FOR USE
1. This is an electrical appliance, not a toy. Keep out of reach of children and pets.
2. Place the machine on a solid, flat, stable surface.
3. Avoid direct sunshine and sources of heat.
4. Be aware that when the bubbles break, it will form a wet slippery surface. Please take care and wipe clean with
a dampened cloth.
5. Pour approximately 100ml of the bubble liquid into the front compartment of the machine where the wheel spins
round.
6. Always unplug the adaptor if being used before filling.
7. It is advisable not to run this unit for more than one hour at a time to prolong the lifetime of the motor.
CLEANING & MAINTENANCE
• Clean the appliance with a soft, damp, lint free cloth.
REPLACING THE BATTERIES
• If your machine stops working after a while, the batteries may require replacing.
• Switch Off the On/Off switch and remove the only screw from the top of the product.
• Remove the cover and remove the old batteries and replace with a new 1.5V LR6 ‘AA’ type battery. Replace the
top cover.
SPECIFICATIONS:
Input power:
4pcs size LR6 “AA” 1.5V battery or input 220~230V~50/60Hz - Output: 6V dc 400mA
Tank capacity: Approximately 100ml.
SOUND RESPONSIVE LED MOTOR FOR MIRROR BALL
GENERAL SAFETY RECOMMENDATIONS:
- Read the manual prior to using the unit.
- Keep the manual for further reference.
- Keep the packaging so that you can transport the unit in its original packaging in order to avoid damage.
- For indoor use only. Do not use the unit in a humid environment.
- Do not use the unit close to heat sources or under direct sun light.
- Make sure that no liquids or small components can enter the housing.
- Use a damp, dust-free cloth to clean the unit. Do not use cleaners or solvents!
- The unit doesn’t contain user serviceable parts.
- Keep out of the reach of children.
- The unit should only be repaired by an qualified electronic repair shop.
- FIRE HAZARD: install the mirror ball with motor at a distance of at least 2 ft from flammable materials (decoration
material and others).
- DANGER: Before the first use of an mirror ball and a motor, the installation needs to be checked by an adult.
INSTALLATION:
NOTE: Follow the instructions diagram carefully when mounting the motor and mirror ball.
A falling mirror ball can cause serious injuries!
- The installation must be done in such a way that it can support 10 times the weight of the mirror ball (approx 20
lbs).
- Motor and mirror ball must be installed out of the reach of children and pets.
- Use only the supplied chain with this product.
The supplied chains are made to the load of the motor.
- Hang motor from a hook in your ceiling. Make sure the hook can support the products’ weight.
OPERATION:
- Open battery compartment and install batteries.
- Use switch on side to turn motor on.
- Use only the supplied chain with this product.
- Hang motor from a hook in your ceiling. Make sure the hook can support the products’ weight.
- You are now ready to party!


Product specificaties

Merk: BeamZ
Categorie: Effect machine
Model: Disco Set IV 151.730
Kleur van het product: Black, Blue, Mirror
Gewicht: 1600 g
Soort lamp: LED
Stroombron: AC
Ingangsspanning: 220 - 240 V
Frequentie: 50 Hz
Type batterij: AA
Baldiameter: 200 "

Heb je hulp nodig?

Als je hulp nodig hebt met BeamZ Disco Set IV 151.730 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Effect machine BeamZ

Handleiding Effect machine

Nieuwste handleidingen voor Effect machine