BeamZ BWA510 Handleiding

BeamZ Effect machine BWA510

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ BWA510 (32 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

BWA 510 Aluminum IP65 LED PAR

Ref. nr.: 150.772

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.0

ENGLISH

Congratulations to the purchase of this Beamz . Please read this manual thoroughly prior to using the in order to benefit product product

fully from all features.

Read the manual prior to using the . Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid product

fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the

manual for future reference.

- Prior to using the , please ask advice from a product

specialist. When the unit is switched on for the first time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do NOT

open the housing.

- Do not place metal objects or pour liquids into the product.

This may cause electrical shock and malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the unit on a vibrating surface.

Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they need to

be replaced by a qualified technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the on. Contact your dealer. Do product

NOT connect the to a rheostat or dimmer.product

- To avoid fire and shock hazard, do not expose the product

to rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- -Connect the product to an earthed mains outlet (220

240Vac/50Hz) protected by a 10 16A fuse.-

- During a thunderstorm or if the product will not be used for a

longer period of time, unplug it from the mains. The rule is:

Unplug it from the mains when not in use.

- If the product has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the product in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the product with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make sure

nobody stands in the mounting area. Mount the effect at

least 50cm away from inflammable material and leave at

least 1 meter space on every side to ensure sufficient

cooling.

- prThis oduct contains high intensity LEDs. Do not look into

the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave the

unit unattended.

- Do not use cleaning sprays to clean switches. The residues

of these sprays cause deposits of dust and grease. In case

of malfunction, always seek advice from a specialist.

- Only operate the product with clean hands.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualified technician before you switch the t on again.produc

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the with a dry cloth.product

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product off prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables prior to

moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use for

damages and faults!

- -The mains voltage is 220 240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains voltage

of the country is suitable for this product.

- Keep the original packing material so that you can transport

the roductp in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read

and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the effects that this light effect may have on them.

The product product has been certified CE. It is prohibited to make any changes to the . They would invalidate the CE certificate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and

35°C/ °F95 .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

Product specificaties

Merk:	BeamZ
Categorie:	Effect machine
Model:	BWA510
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	6800 g
Breedte:	240 mm
Diepte:	315 mm
Hoogte:	340 mm
Aantal lampen:	14 lampen
Soort lamp:	LED
Vermogen lamp:	15 W
Stroombron:	AC
Internationale veiligheidscode (IP):	IP65
Afstandsbediening:	IR
Aantal kleuren:	4 kleuren
Ingangsspanning:	100 - 240 V
Aantal:	1
Aanpasbare snelheid:	Ja
Kleur licht:	Blue, Green, Red, White
Frequentie:	50/60 Hz
Geschikt voor buitengebruik:	Ja
Geschikt voor gebruik binnen:	Ja
Stralingshoek:	24 °
Afstandsbediening inbegrepen:	Ja
Stroomverbruik (typisch):	130 W
Type beeldscherm:	LCD
Dimmer voor de lichtintensiteit:	Ja
Verlichtingsmodi:	Auto, DMX, Master/slave, Stand-alone
DMX-ingang:	Ja
DMX-uitgang:	Ja
Baldiameter:	- "
Aantal DMX-kanalen:	8 kanalen
Minimumhoeveelheid DMX-kanalen:	2 kanalen
Gezichtsveld:	43 °