BeamZ 160.571 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ 160.571 (12 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
BUBBLE MACHINE
160.571
INSTRUCTION MANUAL
HANDLEIDING
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUGSANVISNING
GB
WARNING
- Read the instruction manual thoroughly prior to using the unit.
- Keep this manual for future reference.
- Keep out of the reach of children.
- For indoor use only in dry rooms.
- Do not block the fan or the bubble wheel.
- Do not block the ventilation holes.
- Use good quality bubble oil.
- Do not use inflammable chemicals.
- Do not use the unit at room temperatures of more than 40°C.
- Switch the unit off before you refill the tank.
- If the unit I fitted with an earthed plug, this must be connected to an earthed outlet.
- The unit does not contain any user replaceable parts other than those specified in this
manual.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified
technician.
- During installation, make sure that nobody is standing in the mounting area.
- The unit contains voltage carrying parts. Do NOT open the housing.
- Unplug the unit from the mains prior to repairs or maintenance.
- Never plug or unplug the unit with wet hands.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit
into a mains outlet.
- Only connect this unit to an earthed mains outlet of 220- Vac/50Hz and 10-16A. 240
- When you unplug the unit from the mains always pull the plug, never the lead.
- In order to prevent dropping of the unit, a safety fastening needs to be installed. This
- In order to avoid accidents in public premises, the local legal requirements and safety
regulations/warnings must be fulfilled.
Use
- Place the unit on a flat, stable surface which must not be tilted more than 10° (see
drawing)
- Fill the tank up to the marking with a good quality bubble fluid ( order nr.160.575).
- Switch the unit on via the On/Off switch on the rear side.
- Switch the unit off after use and unplug it from the mains if it will not be used for a long
period of time.
- Rinse the unit regularly with clean water.
10
101010
PLEASE DON'T FILL OVER THE LINE!
Specifications
Power supply: ............................................................. 22 2400- VAC / 50 Hz
Rotation speed: ................................................................................ 24 rpm
Dimensions: ................................................................ 250 x 240 x 272 mm
Weight: ............................................................................................... 3,8 kg
Specifications and design subject to changes without prior notice
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual.
Tronios cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.


Product specificaties

Merk: BeamZ
Categorie: Effect machine
Model: 160.571
Gewicht: 3000 g
Ingangsspanning: 220-240 V
Frequentie: 50 Hz
Productafmetingen (B x H x D): 210 x 235 x 250 mm
Stroomverbruik (typisch): 40 W

Heb je hulp nodig?

Als je hulp nodig hebt met BeamZ 160.571 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Effect machine BeamZ

Handleiding Effect machine

Nieuwste handleidingen voor Effect machine