BeamZ 150.371 IGNITE180 LED Spot Handleiding

BeamZ Verlichting 150.371 IGNITE180 LED Spot

Lees hieronder de 📖 handleiding in het Nederlandse voor BeamZ 150.371 IGNITE180 LED Spot (32 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
IGNITE180 LED Spot
Ref. nr.: 150.371
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.1
2
ENGLISH
Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to benefit
fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid
fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the
manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do NOT
open the housing.
- Do not place metal objects or pour liquids into the product.
This may cause electrical shock and malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the unit on a vibrating surface.
Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to
be replaced by a qualified technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the product on. Contact your dealer. Do
NOT connect the product to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the product
to rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used for a
longer period of time, unplug it from the mains. The rule is:
Unplug it from the mains when not in use.
- If the product has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the product in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the product with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make sure
nobody stands in the mounting area. Mount the effect at
least 50cm away from inflammable material and leave at
least 1 meter space on every side to ensure sufficient
cooling.
- This product contains high intensity LEDs. Do not look into
the LED light to prevent damage to your eyes.
- Do not repeatedly switch the product on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave the
unit unattended.
- Do not use cleaning sprays to clean switches. The residues
of these sprays cause deposits of dust and grease. In case
of malfunction, always seek advice from a specialist.
- Only operate the product with clean hands.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualified technician before you switch the product on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables prior to
moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use for
damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains voltage
of the country is suitable for this product.
- Keep the original packing material so that you can transport
the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read
and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnin
g
s. This is also applicable to all dama
g
es in whatever form.

Product specificaties

Merk: BeamZ
Categorie: Verlichting
Model: 150.371 IGNITE180 LED Spot

Heb je hulp nodig?

Als je hulp nodig hebt met BeamZ 150.371 IGNITE180 LED Spot stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting BeamZ

BeamZ

BeamZ Phoenix 3000 Handleiding

16 November 2024
BeamZ

BeamZ StarColor1280 Handleiding

14 November 2024
BeamZ

BeamZ MB20 Handleiding

5 November 2024
BeamZ

BeamZ MBM220 Handleiding

4 November 2024
BeamZ

BeamZ Cobra 100 Spot Handleiding

2 November 2024
BeamZ

BeamZ IGNITE300A Handleiding

23 Oktober 2024
BeamZ

BeamZ Cobra Wash120 Handleiding

23 Oktober 2024
BeamZ

BeamZ Cobra Wash100 Handleiding

23 Oktober 2024
BeamZ

BeamZ BTSE200 Handleiding

23 Oktober 2024
BeamZ

BeamZ BBP59 Handleiding

23 September 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Lucide

Lucide Encre 40210/02/11 Handleiding

21 November 2024
Lucide

Lucide Olfy 40403/12/31 Handleiding

21 November 2024
Lucide

Lucide Encre 40512/81/36 Handleiding

21 November 2024
Lucide

Lucide Jolli 42702/81/41 Handleiding

21 November 2024
Lucide

Lucide Galla 43408/40/36 Handleiding

21 November 2024
Lucide

Lucide Graham 43409/36/36 Handleiding

21 November 2024
Lucide

Lucide Tosis led 45100/12/31 Handleiding

21 November 2024
Lucide

Lucide Rondell 45101/25/36 Handleiding

21 November 2024
Lucide

Lucide Tycho 45174/04/02 Handleiding

21 November 2024
Lucide

Lucide Honore 45252/11/97 Handleiding

21 November 2024