Bauknecht WAE 9491 Handleiding

Bauknecht Wasmachine WAE 9491

Lees hieronder de 📖 handleiding in het Nederlandse voor Bauknecht WAE 9491 (2 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

GB WAE 9491 PROGRAMME CHART

5019 401 05286

1) For improved garment care spin speed is restricted to 1000 rpm in this programme.

2) For improved garment care spin speed is restricted to 400 rpm in this programme. M0501

- tested and approved by The Woolmark Company -

Programme Care

Labels

Type of wash/

Degree of soiling

Max.

load

Detergent and Additives Selectable Special Options = ❉Tempe-

rature

Max.

Spin

speed Notes

Softener Main

wash

Pre-

wash

Start

Delay Eco + Pre-

wash

Intensive

Rinse

hold

Speed

reduction

Kg Start för-

dröjning Eco+ Förtvätt Extra

Sköljning Skölj-

stopp Centrif. °C rpm

Cotton White /

Hygiene +

Bomull Hygienic+

Normally soiled bed linen, table linen and underwear, towels etc.

made of cotton and linen.

At a temperature of 80°C or more, this programme eliminates

bacteria, ensuring sanitization of your laundry. The bacteria removal

efficiency has been tested following a similar methodology to the NF

EN 13697 standard of Nov. 2001.

6.0 ❉Ye s ❉ ❉ ❉ ❉ ❉ ❉ ❉ 20-95 1400

“Prewash” can be additionally selected for

heavily soiled laundry.

For temperature selection, please respect the

manufacturer’s recommendation on the care

label.

Cotton Colours

Kulörtvätt

Slightly to normally soiled bed linen, table linen and underwear,

towels, shirts etc. made of cotton and linen. 6.0 ❉Ye s ❉ ❉ ❉ ❉ ❉ ❉ ❉ 20-60 1400 “Prewash” can be additionally selected for

heavily soiled laundry.

Synthetics

Syntet

Normally soiled blouses, shirts and other outer clothing made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or

mixtures of these ﬁbres with cotton. 2.5 ❉Ye s ❉ ❉ ❉ ❉ ❉ ❉ ❉ 1) 20-60 1000 1) “Prewash” can be additionally selected for

heavily soiled laundry.

Daily Load

Daglig tvätt Slightly to normally soiled textiles made of cotton and/or

synthetic fibres. 3.0 ❉Ye s –❉– – ❉ ❉ ❉ 20-60 1400 In this programme the spin speed should be

adapted to the fabrics.

Quick Wash

Snabb Hardly worn outer and sports clothing made of cotton, polyester,

polyamid and mixed cotton fabrics. 3.0 ❉Ye s –❉– – ❉ ❉ 20-30 1400 –

Delicate

Fintvätt Curtains and delicate dresses, skirts, shirts and blouses. 1.5 ❉Ye s ❉ ❉ –❉❉ ❉ 1) 20-40 1000 1) “Prewash” can be additionally selected for

heavily soiled laundry.

Wool

Ylle

Only woollens with a felt-free ﬁnish, labelled with the woolmark

and identiﬁed as machine washable.

This programme (40°C) is tested and approved by The

Woolmark Company for machine washable wool.

1.0 ❉Ye s –❉– – ❉ ❉ 1) 20-40 1000 1) If you select “Rinse Hold” do not leave items to

soak for too long.

Handwash

Handtvätt

Textiles made of linen, silk, wool or viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark

Company for handwashable wool. 1.0 ❉Ye s –❉– – ❉ ❉ 2) 20-40 400 2) If you select “Rinse Hold” do not leave items to

soak for too long. A very gentle spin is used in

this programme.

Easy Ironing

Stryka lätt

Normally soiled blouses, shirts and other outer clothing made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or

mixtures of these ﬁbres with cotton. 3.0 ❉Ye s ❉ ❉ ❉ ❉ ❉ ❉ ❉ 1) 20-60 1000 1) To lessen creasing, the water quantity is

increased and the clothes are spun very gently in

this programme.

Spin

Centrifugering – – 6.0 – – – ❉– – – – ❉–1400 In this programme spinning is intensive. Same as

the spin cycle in the “Cotton” programme.

Rinse & Spin

Sköljning+Centrifugering – – 6.0 ❉– – ❉– – ❉❉ ❉ 20 1400 Same as rinsing and spinning in the cotton

programmes.

Rinse & Gentle Spin

Sköljning+Kort centrifugering – – 1.5 ❉– – ❉– – – ❉ ❉ 1) 20 1000 1) Same as rinsing and spinning in the “Wool”

programme.

Drain

Tömning – – – – – – ❉– – – – – – – This programme only drains (alternative method of

terminating the programme after “Rinse Hold”

without spinning). In addition all running

programmes can be cancelled with this programme.

The Dynamic Intelligence technology always guarantees perfect results with maximum efficiency

whatever the wash load.

{

G H

This washing machine is equipped with

automatic safety functions which detect

and diagnose faults at an early stage and react

appropriately, e.g.:

A. “Pump” indicator

B. “Water tap closed” indicator

Check your washing machine’s water

supply.

C. “Door locked” indicator

D. “Start” button

E. “Start delay” button with time display

F. Programme sequence indicator

G. “Spin Speed Reduction” button

H. Reset button

I. Selectable programmes

J. Temperature selection button

E J

40105286GB.fm Page 1 Thursday, December 29, 2005 4:57 PM

Black process 45.0° 100.0 LPI

5019 401 05286

Add the detergent as described in the chapter

“Detergent and Additives” in the instructions for use.

1. Turn the programme selector knob to the

desired programme.

2. The remaining time display shows the duration

of the chosen programme (in hours and minutes),

and the lamp over the button flashes.“Start”

3. The programme sequence indicator and the

predefined spin speed indication corresponding to

the selected programme lights up.

The recommended temperature (see the indicator)

can be altered by pressing the temperature selection

button under the temperature display.

• Wash your laundry in the desired programme

(Cotton, Synthetics), adding an appropriate

amount of chlorine bleach to the SOFTENER

chamber (close the detergent dispenser carefully).

• Immediately after end of programme, start the “Rinse

and Spin” programme to eliminate any residual bleach

smell; if you want, you can add softener.

“Eco +” button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum

combination of excellent washing result and even

lower energy consumption can be achieved.

“Prewash” button

• Only for heavily soiled laundry (e.g. sand or

granular dirt). Programme duration is increased

by some 15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps

people with detergent allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water

without being spun: discoloration of the laundry

and additional creasing are prevented.

• This option is particularly recommended for the

programme “Synthetic” or “Delicate”.

• This function is particularly useful if you want to

postpone spinning to a later time.

Note: The programme has reached the “Rinse

Hold” when the corresponding light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the

appropriate spin cycle for the current programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to “Drain” and press

the “Start” button again.

“Spin Speed Reduction” button

• A maximum spin speed is assigned to each

programme.

• Press the button to set another speed for the

spin cycle.

• If no light goes on, the final spin is cancelled.

The water is only drained out.

CONSUMPTION DATA *

Programme Temperature

(°C)

Wash

(kg)

Water

(l)

Energy

(kWh)

Programme duration

approx.**

(hours : minutes)

Cotton White/Hygiene+ 95 6.0 49*** 1.90 2:00

Cotton Colours 60 6.0 44 1.14 2:20

Cotton with “Eco +” **** 60 6.0 44 1.02 2:30

Cotton Colours 40 5.0 42 0.70 2:05

Synthetics 60 2.5 60*** 0.90 1:45

Synthetics 40 2.5 55 0.60 1:30

Daily Load 40 3.0 48 0.55 1:00

Quick Wash 30 3.0 37 0.30 0:30

Delicate 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.50 0:40

Handwash 30 1.0 45 0.40 0:35

Easy Ironing 40 3.0 60 0.60 1:30

*The consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60456.

** The programme duration may also vary from the chart values. The washing machine is able to allow for particular

household conditions and to adapt the programme run time accordingly.

*** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump

drains the water out.

**** Reference programme for energy label.

POUR IN DETERGENT, CLOSE THE

DOOR AND SELECT A PROGRAMME

USING CHLORINE BLEACH

SELECT SPECIAL OPTIONS -

The corresponding lights go on (if not

selectable: rapid flashing for 3 seconds)

With the “Start Delay” function the appliance can be

run cheaply e.g. at night, when the electricity is

cheaper.

• Press the “Start Delay” button. Select the

programme start from 1 to 24 hours ahead by

pressing the button again.

• Press the button. “Start”

The Start Delay indicator light flashes until the

programme starts.

“Start Delay” correction.

• Before “Start” has been pressed:

The preset number of hours can be altered by

continuously pressing the “Start Delay” button.

By pressing the Start Delay button again after the

“24” setting, the time delay can be deleted again

or set again.

After “Start” has been pressed:

The preset number of hours can be reduced by

pressing the “Start Delay” button again; please

note, however, that the washing programme

starts IMMEDIATELY, as soon as you operate it

again with the Start Delay switch 01 setting.

To increase the number of hours preselected,

first turn the programme selector switch to the

“Off” position. Then set the programme and the

additional options again and select the desired

number of hours.

After you have selected the programme and eventually

the additional options, the indicator light over the

“Start” button flashes. Turn on the tap and start the

programme by pressing the “Start” button. Now the

indicator light over the button goes on.

In addition, all programme phases are indicated by the

associated lights. After the end of a programme phase,

the associated indicator light goes out. Thus the

programme sequence indicator moves from left to

right across the wash, rinse and spin phases. At the end

of the programme, only the “End” indicator is still on.

As long as a washing programme is running, the

lamp lights up to show that the door cannot be

opened. When the lamp goes off, the door can be

opened again.

If “Start” has been pressed, but the door is not

latched, the “Door Locked” indicator flashes for 10

seconds. The door must be pushed shut within this

time.

After the 10 seconds, the “Door Locked” indicator

goes out and the “Start” button flashes. The door

must then be opened and closed again and the

“Start” button must be pressed.

“Pump”

Waste water is not pumped out. Check wether the

drain hose is kinked or the filter must be cleaned; in

the latter case refer to the Instructions for Use

(“Removing the Filter”).

“Water Tap”

The appliance has no or insufficient water supply.

Open the water tap; if the indication still lights up,

refer to the “Troubleshooting Guide" in the

Instructions for Use.

• The “End” indicator goes on.

1. Switch the washing machine off by turning the

programme selector to the “O”-position.

2. Turn off the tap.

3. Open the door and unload the machine.

A newly-selected programme will continue in the

same programme section during which the current

programme was interrupted. Therefore do not add

any more detergent.

1. Press the “Start” button to interrupt the

programme. The light flashes.

2. Select the new programme (with temperature),

any additional options and - if you wish - another

spin speed.

3. Press the button again to restart the “Start”

programme.

• If you are in the “Prewash” programme step, this

additional option cannot be deselected as

described (to do this see “Cancel/Reset a

running programme before the end”).

Press the “Reset” button for at least 2 seconds.

Any existing water is drained out before the door

can be opened.

START DELAY

PROGRAMME START

“DOOR LOCKED” INDICATOR

“TROUBLE” INDICATORS

PROGRAMME END

RESELECT AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

40105286GB.fm Page 2 Thursday, December 29, 2005 4:57 PM

Black process 45.0° 100.0 LPI

Product specificaties

Merk:	Bauknecht
Categorie:	Wasmachine
Model:	WAE 9491

Heb je hulp nodig?

Als je hulp nodig hebt met Bauknecht WAE 9491 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine Bauknecht

Bauknecht BPW 1014 A Handleiding

21 December 2024

Bauknecht WM Class 9A Handleiding

4 December 2024

Bauknecht W Active 711 Handleiding

4 December 2024

Bauknecht WM Pure 9A Handleiding

4 December 2024

Bauknecht WMT Evo 6B Handleiding

4 December 2024

Bauknecht WATK Sense 107S 52 N Handleiding

4 December 2024

Bauknecht WMT Class Eco 6523 C Handleiding

4 December 2024

Bauknecht WM 8 M100 B Handleiding

4 December 2024

Bauknecht WMT Pro Eco 6ZB Handleiding

4 December 2024

Bauknecht WM BK 10A CH Handleiding

4 December 2024

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Asko w 6362 l tit Handleiding

5 December 2024

Asko W2084.W-2 Handleiding

5 December 2024

Asko w 6362lt Handleiding

5 December 2024

Svan SL8201DD Handleiding

21 December 2024

Svan SLI8200D Handleiding

21 December 2024

Svan SL9401AIDB Handleiding

21 December 2024

Svan SL7201DD Handleiding

21 December 2024

Electrolux EWD8462OBI Handleiding

20 December 2024

Svan SL6001DD Handleiding

20 December 2024

Whirlpool FFWDB 964489 WV EE Handleiding

20 December 2024