Bauknecht TRAK 6450/1 Handleiding

Bauknecht Wasdroger TRAK 6450/1

Lees hieronder de 📖 handleiding in het Nederlandse voor Bauknecht TRAK 6450/1 (8 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8



















 

!

!  " 

#





$

%&

'& " ()%

!  " 

1. Removing the packaging

and check

•After unpacking, make sure

that the dryer is undamaged.

If in doubt, do not use the

dryer. Contact After-Sales

Service or your local retailer.

•Keep the packaging

materials (plastic bags,

polystyrene parts, etc.) out of

reach of children, as they are

potentially dangerous.

2. Electrical Connections

•Electrical connections must

be carried out by a qualified

technician in compliance

with the manufacturer’s

instructions and current

standard safety regulations.

•Electrical connection must

comply with local Electricity

Board regulations.

•Voltage information, power

consumption and the

required fuse protection is

shown on the rating plate

mounted at the rear of the

dryer.

•The manufacturer cannot

accept any liability for

personal injury or damage to

property resulting from

failure to adhere to these

instructions.

•The dryer must be earthed as

prescribed by law.

•Do not use extension leads or

multiple adaptors.

•Before any maintenance on

the dryer disconnect it from

the mains supply.

•Do not operate the dryer if it

has been damaged during

transport. Contact one of our

After-Sales Service

technicians.

•Mains cables must be

replaced by an original cable

and is only to be carried out

by a technician from After-

Sales Service or an authorized

electrician.

•After installation access to

the mains plug has to be

guaranteed, or the all-pole

disconnection has to be

possible with a switch.

3. Installation

•Do not install your dryer

where it can be subject to

extreme conditions, such as:

poor ventilation,

temperatures around

freezing (or above 35°C).

•Remove the protective foil

from the control panel.

Stability:

When installing the dryer

always carefully level the

dryer adjusting the two feet

and check the correct

levelling with a spirit level.

To built in the dryer

•For security reason do not

remove the worktop.

•Connect the dryer to an

external ventilation system in

order to prevent steam from

damaging your furniture

during the years.

Stacking kit

Your dryer can be stacked on

top of your front loading

washing machine.

To do this, use stacking kit

AMH 752, available at your

dealer.

Minimum housing

dimensions:

Width: 600 mm

Height: 850 mm

Depth: 560 mm

#

1) For Great Britain only

Warning - this appliance

must be earthed

Fuse replacement

If the mains lead of this

appliance is fitted with a

BS 1363A 13amp fused plug,

to change a fuse in this type

of plug use an A.S.T.A.

approved fuse to BS 1362

type and proceed as follows:

1. Remove the fuse cover (A)

and fuse (B).

2. Fit replacement 13A fuse into

fuse cover.

3. Ret both into plug.

Important:

The fuse cover must be

refitted when changing a

fuse and if the fuse cover is

lost the plug must not be

used until a correct

replacement is fitted.

Correct replacement are

identified by the colour

insert or the colour

embossed in words on the

base of the plug.

Replacement fuse covers are

available from your local

electrical store.

2) For the Republic of

Ireland only

The information given in

respect of Great Britain will

frequently apply, but a third

type of plug and socket is also

used, the 2-pin, side earth type.

3) Socket outlet / plug

(valid for both

countries)

If the fitted plug is not suitable

for your socket outlet, Please

contact Whirlpool Service for

further instruction. Please do

not attempt to change plug

yourself. This procedure needs

to be carried out by a qualified

Whirlpool technician in

compliance with the

manufactures instructions and

current standard safety

regulations.

Product specificaties

Merk:	Bauknecht
Categorie:	Wasdroger
Model:	TRAK 6450/1

Heb je hulp nodig?

Als je hulp nodig hebt met Bauknecht TRAK 6450/1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasdroger Bauknecht

Bauknecht T Soft M11 82 N Handleiding

4 December 2024

Bauknecht TRAD 6247 Handleiding

3 December 2024

Bauknecht TRAD 6267 Handleiding

3 December 2024

Bauknecht TRKB 7570 Handleiding

21 Juni 2023

Bauknecht T M11 8X3EY DE Handleiding

11 Juni 2023

Bauknecht TN M11 8X2SK CH Handleiding

5 Juni 2023

Bauknecht TA Care 6C BK Handleiding

29 Mei 2023

Bauknecht TK EVO 74B BW Handleiding

18 Mei 2023

Bauknecht TRK 4970/3 Handleiding

11 Mei 2023

Bauknecht TKL M11 82 N Handleiding

10 Mei 2023

Handleiding Wasdroger

Nieuwste handleidingen voor Wasdroger

Svan SSB800A2DB Handleiding

21 December 2024

Haier HD100-A3959E-IT Handleiding

20 December 2024

Haier HD100-A3959RE-IT Handleiding

20 December 2024

Bosch WTN832M1NL Handleiding

17 December 2024

Ufesa Pro Ionic-Shine Handleiding

17 December 2024

Ufesa Pro Ionic Style Handleiding

17 December 2024

Altus ADP80W Handleiding

17 December 2024

BEKO B5T69233MG Handleiding

15 December 2024

AEG T65170AV Handleiding

12 December 2024

Haier HD90-A3979NU1 Handleiding

10 December 2024