Bauknecht TRA 63560 Handleiding

Bauknecht Wasdroger TRA 63560

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Bauknecht TRA 63560 (11 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch
Verkauf Telefon 0848 801 002 Fax 0848 801 017 verkauf@bauknecht.ch
Kundendienst Telefon 0848 801 001 Fax 0848 801 003 service@bauknecht.ch
Ersatzteile Telefon 0848 801 005 Fax 0848 801 004 ersatzteilverkauf@bauknecht.ch
Instructions for use
TRA 63560
5019 407 00471
Very
Wet
Load
Wet
Load Load
Fabric Drying
Cycles
& Drying levels
Drying options Buzzer & Anti-Crease
cannot be selected together
Gentle
Reduces drying
intensity
(recommended
for delicate
items)
Dryness
Adjustment
(Adjusts Dryness
Level according
to wishes)
Buzzer
Signals/Sounds
end of drying
cycle at
Intervals
Anti-Crease
Prevents
laundry from
creasing
Indicative
drying times
(in minutes)
Kg
95ξ‚’
160ξ‚’ 80ξ‚’
130ξ‚’ 3.0
6.0 Cotton
max 6 kg
Cupboard dry plus
80ξ‚’
130ξ‚’ 60ξ‚’
110ξ‚’ 3.0
6.0 Cupboard dry *
60ξ‚’
110ξ‚’ 50ξ‚’
85ξ‚’ 3.0
6.0 Iron dry *
25ξ‚’
40ξ‚’ 20ξ‚’
35ξ‚’ 1.0
2.5 Synthetics
max 2.5 kg
Cupboard dry *
20ξ‚’
35ξ‚’ 15ξ‚’
30ξ‚’ 1.0
2.5 Iron dry
70ξ‚’ 55ξ‚’ 2.5
Delicate
max 2.5 kg
Low drying intensity for
delicates and garments
labelled -
- - - Airing Laundry is aired and refreshed
for 30 minutes without
heating. - -
- - -
Time Completes drying or dries
single items (suitable for all
fabrics). - -
QUICK REFERENCE GUIDE
Please also carefully read the
ξ‚“Instructions for Useξ‚”.
TRA 63560GB
Cotton
SyntheticsDelicate
AiringTime
* Test programmes according IEC 61121.
Start
Pause Starts the drying cycle. The
Start/Pause indicator lamp is
blinking during the selection
phase.
Press to confirm the final
selection.
Programme
selection
Turn the programme selector knob
to the desired programme. The
indicator next to the programme
name lights up. The start indicator
blinks to show, that the dryer is in
selection mode. After the Start /
Pause button is pressed the start
indicator lamp lights up and the
programme starts.
Dryness
Adjustment
Dryness adjustment is an option to
adjust the dryness of the laundry
according to your wishes. Select the
desired programme and the option
dryness level adjustment by
pressing the button ξ‚“+ξ‚“ for more
dry or the button ξ‚“ξ‚–ξ‚“ for more
humid. The selected dryness will be
stored as a pre-setting to the
selected drying programme. Using
the drying programme next time
the pre-setting appears. By pressing
the dryness adjustment buttons ξ‚‘+ξ‚’
or ξ‚‘ξ‚–ξ‚‘ the pre-setting can be
changed.
Filter The indicator lamp lights up when
the filter needs cleaning. Clean the
filter at the end of every cycle.
PROGRAMME SEQUENCE INDICATION
End The programme sequence is
indicated by lamps, switching
on when programme step starts
and and switching off when the
programme step is passed.
5019 407 00471
1. Check that all fastenings are closed and
that pockets are empty.
2. Turn the articles inside out.
3. Place laundry loosely in the drum to
make sure it doesnξ‚’t become tangled.
Sort laundry as follows:
A) By care symbols
(on the collar or inside seam):
Suitable for tumble drying
Tumble drying with reduced
drying intensity only. Press
gentle button or select specific
programme
Do not tumble dry
B) By amount and thickness/weight
Whenever the load to be dried exceeds
dryer capacity, separate laundry
according to weight (e.g. towels from
thin underwear).
C) By type of fabrics
Cotton/linen: towels, cotton jersey,
bed and table linen made of cotton or
linen.
Synthetics/Easy Care: blouses, shirts,
overalls, etc. made of polyester or
polyamide, as well as cotton/synthetic
mixes.
D) By drying level
ξ‚• Sort into: iron dry, cupboard dry, etc.
Do not tumble dry: woollens, silk, nylon
stockings, delicate embroidery, fabrics
with metallic decorations, bulky items such
as sleeping bags, etc.
Important: only use specific indicated
dryer-safe additives and rinse items
that have been treated with stain remover
thoroughly in plenty of water before
drying. Only use specific indicated
dryer-safe plastic items and never dry
rubber or articles contaminated with
vegetable oil in the dryer.
Programme and Options:
ξ‚• To select a programme, turn the
programme selector knob. The Start/
Pause indicator lamp is blinking,
indicating that the cycle needs to be
started.
ξ‚• To select an option, press the
corresponding button. The indicator
lamp above the button confirms that a
selection has been made.
ξ‚• Press the button again to cancel the
option.
1. Having selected the desired
programme and options, press the
Start button.
If the laundry is not removed at the
end of the drying cycle, an automatic
anti-crease cycle will operate for
maximum 60 min. The drum rotates at
regular intervals, preventing the
laundry from creasing.
Anti-Crease protection re-
distributes laundry in the drum.
When the Anti-Crease option is
selected and laundry has not been
taken out, an anti-crease cycle is
activated for 12 hrs.
2. On completion of the programme, set
the programme selector knob to
position ξ‚“0ξ‚”.
When changing the programme during
the drying cycle, the dryer stops. The Start/
Pause indicator lamp is blinking.
To operate the new programme, press the
Start/Pause button again.
To interrupt the dryer during
operation
1. Set the programme selector knob to
Airing.
2. Press the Start button.
Wait at least 5 minutes before opening
the door to allow the dryer to cool
down.
For your safety the programme stops
automatically if you open the door.
3. To restart, after door opening, close
the door and press the Start/Pause
button again.
Clean the lint filter at the end of every
drying cycle:
1. Open the door.
2. Pull the filter upwards.
3. Remove lint using a soft brush or your
fingertips.
4. Push the filter back into place.
If a fault occurs, before contacting our
After-Sales Service, make the following
checks to try and remedy the problem:
Drying takes too long / laundry is not
dry enough:
ξ‚• Was the correct programme selected?
ξ‚• Was the inserted laundry too wet
(Washing machine spin speed less than
800 rpm)?
ξ‚• Is the lint filter dirty (filter indicator
lamp on)?
The dryer does not operate:
(after a power failure and/or
interruption to the mains supply,
always press the Start button).
ξ‚• Is the plug properly inserted into the
mains electricity socket?
ξ‚• Is there a power failure?
ξ‚• Has the fuse blown?
ξ‚• Is the door well closed?
ξ‚• Has the programme been selected?
ξ‚• Are the END and Anti-crease indicator
lamps lighting up? The drying cycle is
complete and the laundry can be taken
out.
ξ‚• Has the Start/Pause button been
pressed?
Lint filter indicator lamp on:
ξ‚• Is the lint filter clean?
ξ‚• Is the vent hose blocked?
All programme sequence indicators
blinking:
ξ‚•Service call necessary.
If, after carrying out the above checks the
malfunction persists or appears again, turn
the dryer off and call our After-Sales
Service (refer to guarantee).
Please specify:
ξ‚• The nature of the fault.
ξ‚• The dryer type and model.
ξ‚• The service code (the number after the
word Service on the adhesive rating
plate) on the right-hand side when the
door is open.
ξ‚• Your full address and phone number.
PREPARING THE LAUNDRY SELECTING A PROGRAMME & OPTIONS
STARTING & COMPLETING A
PROGRAMME
CHANGING A PROGRAMME
INTERRUPTING A PROGRAMME
DAILY MAINTENANCE & CLEANING
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE


Product specificaties

Merk: Bauknecht
Categorie: Wasdroger
Model: TRA 63560

Heb je hulp nodig?

Als je hulp nodig hebt met Bauknecht TRA 63560 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasdroger Bauknecht

Handleiding Wasdroger

Nieuwste handleidingen voor Wasdroger