Bauknecht EMZ 3460/01 IN Handleiding

Bauknecht Fornuis EMZ 3460/01 IN

Lees hieronder de 📖 handleiding in het Nederlandse voor Bauknecht EMZ 3460/01 IN (12 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
15
TABLE OF CONTENTS GB
INSTALLATION PAGE 16
ELECTRICAL CONNECTION PAGE 18
BEFORE USING THE APPLIANCES PAGE 19
PROTECTING THE ENVIRONMENT PAGE 19
PRECAUTIONS AND GENERAL RECOMMENDATIONS PAGE 19
ENERGY SAVING TIPS PAGE 20
OVEN ACCESSORIES PAGE 21
COOKTOP ACCESSORIES PAGE 21
COOKING CHARTS PAGE 22
CLEANING THE OVEN AND ACCESSORIES PAGE 23
CARE AND MAINTENANCE OF
CONVENTIONAL ELECTRIC COOKTOPS PAGE 25
CARE AND MAINTENANCE OF
GLASS-CERAMIC COOKTOPS PAGE 25
TROUBLESHOOTING GUIDE PAGE 25
AFTER SALES SERVICE PAGE 26
DECLARATION OF CONFORMITY CE PAGE 26
16
Technical information for the installer
OVEN
•After removing the oven from its packaging, before
making the connections place it on the polystyrene
foam base to protect it from damage.
•Do not attempt to lift the oven by the handle.
Lift at the sides as shown in the figure (see arrow).
•Check that the appliance has not been damaged in
transit.
•Oven dimensions and kitchen unit dimensions are
shown in the opposite figure.
•Kitchen units in contact with the oven must be heat
resistant (80° C).
•If plastic laminates or cement are not sufficiently
heat-resistant, warping, bubbling or detachment of
the finish may result.
•For correct ventilation, follow the ventilation
opening directions shown in the figure (at least 500
x 80 mm). Also provide for at least 5 mm clearance
between the top of the oven and the lower edge of
the worktop. This space must not be obstructed by
cross rails or other structural elements.
•Carry out the electrical connections between
cooktop and oven (see chapter “Electrical
Connection”).
•Secure the oven to the kitchen unit with screws (A)
as shown.
INSTALLATION
17
Cooktop
• The cooktop must be set into a worktop
between 20 mm and 50 mm thick.
There must be nothing between the cooktop
and the oven (cross rails, brackets, etc.).
• If the cooktop is to be installed next to a
column unit, leave a distance of at least 100mm
from the edge of the cooktop to the side of the
column unit.
•Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
•If not already present, fit the supplied seal to the
cooktop flange after cleaning the contact area as
shown in the figure.
Cooktop with electric hotplates
• If the worktop is made of wood, fit the supplied
clips.
1. Position the 4 spring clips (B) and fit them in their
locations on the underside of the cooktop.
2. Fit the cooktop into the worktop.
• If the worktop is made of marble, plastic,
ceramics, natural stone, etc., the cooktop must
be secured with brackets (C) code 4819 310
18528 (to be requested from After Sales Service).
1. Position the brackets over the holes and secure
them with the supplied screws.
2. Fit the cooktop into the worktop.
Glass-ceramic cooktop
N.B.: Remove the protective film before installing the
cooktop.
• If the worktop is made of wood, use the supplied
spring clips and screws.
1. Position the 4 clips (D) as shown and at the
specified dimensions.
2. Secure the clips using screws (E).
3. Fit the cooktop into the worktop.
• If the worktop is made of marble, plastic,
ceramics, natural stone, etc., the cooktop must
be secured with brackets (F) code 4819 404 78697
(to be requested from After Sales Service).
1. Fit the cooktop into the worktop.
2. Position the 4 brackets (F) as shown in the figure,
in accordance with the thickness of the worktop.
3. Fix the 4 screws (G) in holes (H).
INSTALLATION


Product specificaties

Merk: Bauknecht
Categorie: Fornuis
Model: EMZ 3460/01 IN

Heb je hulp nodig?

Als je hulp nodig hebt met Bauknecht EMZ 3460/01 IN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis Bauknecht

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis