Barco PJWU-101B Handleiding

Barco Beamer PJWU-101B

Lees hieronder de 📖 handleiding in het Nederlandse voor Barco PJWU-101B (86 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/86
PJWU-101B
User manual
Barco nv Projection Division
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.82.11
Fax: +32 56.36.883.86
Support: www.barco.com/esupport
Visit us at the web: www.barco.com
Printed in China
Changes
Barco provides this manualas is’ without warranty of any kind, either expressed or implied, including but not limited to the
implied war- ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes
to the product(s) and/or the program(s) described in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the
information in this publication; these changes are incorporated in new editions of this publication.
The latest edition of Barco manuals can be downloaded from the Barco web site www.barco.com or from the secured Barco
web site https://my.barco.com.
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded,
transmitted or stored in a retrieval system without the prior written consent of Barco.
EN55022/CISPR22 Class A ITE (Information Technology Equipment)
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. Such equipment
should not be restricted in its sale but the following warning shall be included in the instructions for use:
Warning : This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Federal Communications Commission (FCC Statement)
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference, in which case the user will be responsible
for correcting any interference at his own expense.
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt,
the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for material and
manufacturing faults Barco must be informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of
commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the
fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or
unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract. All other claims,
in particular those relating to compensation for direct or indirect damage, and also damage attributed to the operation of
software as well as to other services provided by Barco, being a component of the system or independent service, will be
deemed invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or due
to the intent or gross negligence or part of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled
incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods
are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry
provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the guarantee
provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in the this manual must be
complied with by the customer.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their
respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be
understood as advertising for the products or their manufacturers.


Product specificaties

Merk: Barco
Categorie: Beamer
Model: PJWU-101B
Kleur van het product: Black, White
Ingebouwd display: Nee
Gewicht: 33000 g
Breedte: 670 mm
Diepte: 530 mm
Hoogte: 285 mm
Geluidsniveau: 45 dB
Gewicht verpakking: 42000 g
Breedte verpakking: 829 mm
Diepte verpakking: 709 mm
Hoogte verpakking: 437 mm
Aantal lampen: 2 lampen
Soort lamp: USHIO
Stroombron: AC
Plaatsing: Desktop, Ceiling
Oorspronkelijke beeldverhouding: 16:10
Ethernet LAN: Ja
Geïntegreerde geheugenkaartlezer: Nee
Typische contrastverhouding: 1500:1
Projector helderheid: 11000 ANSI lumens
Projectietechnologie: DLP
Projector native resolution: WUXGA (1920x1200)
Geschikt voor schermmaten: - "
Projectie-afstand objectief: - m
Matrix grootte: 0.96 "
VGA (D-Sub)poort(en): 1
Aantal HDMI-poorten: 2
Soort serieële aansluiting: RS-232
DVI-poort: Nee
Aantal Ethernet LAN (RJ-45)-poorten: 1
Brandpuntbereik: - mm
Levensduur van de lichtbron: 1500 uur
Type lichtbron: Lamp
Stroomverbruik (in standby): 2 W
Vermogensverbruik (max): 1180 W
Volledige HD: Ja
Verbruik (modus Economisch): 890 W
Ingang stroom: Ja
RS-232 port: 1
Lampvermogen: 465 W
Ondersteunde grafische resoluties: 1920 x 1200 (WUXGA)
Kleurdiepte: 10 Bit
Ethernet LAN, data-overdrachtsnelheden: 10, 100 Mbit/s
Levensduur van de lichtbron (besparingsmodus): 2500 uur
Matrix type: DMD
Geluidsniveau (spaarzame modus): 40 dB
Eenvormigheid: 85 procent
BNC input ports: 5
Projector helderheid (spaarzame modus): 7500 ANSI lumens
Afstandsbediening inbegrepen: Nee
Wifi: Nee
AC-ingangsspanning: 100 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 30 - 90 procent
Type product: Projector voor grote zalen

Heb je hulp nodig?

Als je hulp nodig hebt met Barco PJWU-101B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beamer Barco

Handleiding Beamer

Nieuwste handleidingen voor Beamer