Barco PGWU-62L Handleiding

Barco Beamer PGWU-62L

Lees hieronder de 📖 handleiding in het Nederlandse voor Barco PGWU-62L (56 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/56

User manual

Doc. Revision: 01

Barco nv Projection Division

Noordlaan 5, B-8520 Kuurne

Phone: +32 56.36.89.70

Fax: +32 56.36.88.24

Support: www.barco.com/en/support

Visit us at the web: www.barco.com

Changes

Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or merchantability and tness for a particular purpose. Barco may make improvements and/or

changes to the product(s) and/or the program(s) described in this publication at any time without notice.

This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the

information in this publication; these changes are incorporated in new editions of this publication.

The latest edition of Barco manuals can be downloaded from the Barco web site

www.barco.com or from the secured Barco web site https://my.barco.com.

transmitted or stored in a retrieval system without the prior written consent of Barco.

EN55022/CISPR22 Class A ITE (Information Technology Equipment)

Class A ITE is a category of all other ITE which satises the class A ITE limits but not the class B ITE limits. Such

equipment should not be restricted in its sale but the following warning shall be included in the instructions for use:

Warning : This is a class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

Federal Communications Commission (FCC Statement)

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the

FCC rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area may cause harmful interference, in which case the user will be

responsible for correcting any interference at his own expense.

Guarantee and Compensation

Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On

receipt, the purchaser must immediately inspect all delivered goods for damage incurred during transport, as well as for

material and manufacturing faults Barco must be informed immediately in writing of any complaints.

The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the

date of commissioning, at latest 30 days after the transfer of risks. In the event of justied notice of complaint, Barco

can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves

to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the

contract. All other claims, in particular those relating to compensation for direct or indirect damage, and also damage

attributed to the operation of software as well as to other services provided by Barco, being a component of the system

or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of

properties guaranteed in writing or due to the intent or gross negligence or part of Barco.

If the purchaser or a third party carries out modications or repairs on goods delivered by Barco, or if the goods are

handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the

goods are subject to inuences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered

invalid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic

circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normal maintenance are not subject to the

guarantee provided by Barco either.

The environmental conditions as well as the servicing and maintenance regulations specied in the this manual must be

complied with by the customer.

Trademarks

Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their

respective holders.

All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as

advertising for the products or their manufacturers.

Product specificaties

Merk:	Barco
Categorie:	Beamer
Model:	PGWU-62L
Kleur van het product:	Wit
Ingebouwd display:	Ja
Gewicht:	17500 g
Breedte:	506 mm
Diepte:	516 mm
Hoogte:	251 mm
Geluidsniveau:	35 dB
Breedte verpakking:	796 mm
Diepte verpakking:	595 mm
Hoogte verpakking:	378 mm
Stroombron:	AC
Afstandsbediening:	IR
Oorspronkelijke beeldverhouding:	16:10
Ethernet LAN:	Ja
Meegeleverde kabels:	AC
Typische contrastverhouding:	11000:1
Projector helderheid:	6000 ANSI lumens
Projectietechnologie:	DLP
Projector native resolution:	WUXGA (1920x1200)
Keystone correctie, verticaal:	±20 °
Geschikt voor schermmaten:	- "
Projectie-afstand objectief:	- m
VGA (D-Sub)poort(en):	2
Aantal HDMI-poorten:	1
Soort serieële aansluiting:	RS-232
DVI-poort:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Brandpuntbereik:	- mm
Levensduur van de lichtbron:	20000 uur
Stroomverbruik (in standby):	- W
Vermogensverbruik (max):	580 W
Ondersteunde beeldverhoudingen:	16:10
Volledige HD:	Ja
RS-232 port:	1
3D:	Nee
Ethernet LAN, data-overdrachtsnelheden:	10,100 Mbit/s
Geluidsniveau (spaarzame modus):	32 dB
Eenvormigheid:	90 procent
Horizontale lens verplaatsingsbereik:	-30 - 30 °
Verticale lens verplaatsingsbereik:	-100 - 100 procent
Afstandsbediening inbegrepen:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent