Axis SKDP03-T Handleiding

Axis Niet gecategoriseerd SKDP03-T

Lees hieronder de 📖 handleiding in het Nederlandse voor Axis SKDP03-T (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

Cable Kit

Mou g instructions ntin

Doc.-ID: CableKitSKDP03-T_95M_MountingInstructions_rev.00.docx, Seite 3 von 12

1 Content of the C Kit SKDP03-T able

Figure 1 Content of the C K SKDP03-T .1 –able it

2 Installing and wiring (connection to ExTB-3)

The following chapter describes the conﬁguration of the cable, how to insert it into the

terminal box ExTB-3 and how to connect it.

Attention!

The electrical connection of the equipment must be executed by quali-

ﬁed personnel only!

Attention!

Please observe the national regulations regarding security, installa-

tion, and accident prevention (e.g. IEC 60079-14)!

Attention!

When stripping the isolation, no inner cores must be damaged!

(a)

(b)

(c)

(d)

 95 m SKDP03-T System Cable

Digital (a)

 1 x cable gland with compound

(b)

 5 ml Loctite threadlock (c)

 1 x CAT6 RJ45 industrial plug

pro (5.5 10.5 mm) (d) –

 40 cm shrinking tube yellow-

green (e)

 10 cm shrinking tube black (e)

 8 x wire-end ferrules (e)

 1 x documentation

(e)

Doc.-ID: CableKitSKDP03-T_95M_MountingInstructions_rev.00.docx, Seite 5 von 12

Cut the yellow-green shrinking tube to match the length of the shielding braid. Now

shrink-ﬁt the shrinking tube by using a hot air blower.

Figure 2 Shrinking tube over twisted shielding braid .4 –

After this, put the black shrinking tube over all cables and the shielding and shrink it.

Remove approx. 1 cm of the foil (6) the top of the 4 twisted pairs (8). Untwist them to at

match this length and cut oﬀ the ends with a wire stripper. Squeeze the wire end ferrules

onto the 3 power cables the grounding cable.

Figure 2 Customized cable .5 –

(6)

(8)

(3)

Product specificaties

Merk:	Axis
Categorie:	Niet gecategoriseerd
Model:	SKDP03-T
Kleur van het product:	Groen
Gewicht:	15500 g
Snoerlengte:	95 m
Compatibiliteit:	Network cameras in ExCam series.
Soort kabel:	Cross-over kabel
Code geharmoniseerd systeem (HS):	85299020
Geslacht connector:	Nee
Output connectietype:	RJ-45