Avantree Jogger Pro Handleiding

Avantree Oordopje Jogger Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Avantree Jogger Pro (5 pagina's) in de categorie Oordopje. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

1. Product Descripon

Avantree Jogger Pro (AS6P) is a lightweight Bluetooth stereo headphone with integral microphone. It

is great for use during acve pursuits, such as jogging and exercising. It has a trendy, fashionable

sports design and is splash proof. The headset is equipped with Bluetooth 4.0 technology, so you can

connect two devices simultaneously and enjoy excellent sound quality from the aptX codec. Immerse

yourself in rich audio from your smartphone, Bluetooth enabled MP3 player or tablets. Jogger Pro is

the perfect companion for your workout roune.

2. Product Overview

(1). Speaker

(2). Next

(3). Led indicator

(4). Previous

(5). Headband

(6). Charging socket

(7). Mul-funcon buon(MFB)

(8). Microphone

(9). Volume down

(10). Volume up

What’s in the box:

 Avantree Jogger Pro

 USB charging cable

 Silicone ear buds

 Carrying pouch

 User manual

 Gi card

Oponal:

 Travel charger/Car charger/Armband

3. Charging

Avantree Jogger Pro uses a 2.0mm jack charging socket.

1) For the rst charge, please charge the device for at least 2.5 hours to make sure the headset is

fully charged and the baery reaches its full capacity.

2) Aerwards, each charge cycle will take up to 2.5 hours.

3) The LED will indicate red when charging and will turn o when charging is complete.

4) If you have not used the item for a few months, the LED might not immediately light red when

rst charging. In this case, it may take 15-35 minutes before the LED lights red.

Noce:

 Use an Avantree cered charger only. Or consult Avantree support before using any other third

party charger.

 When baery power is low, the red indicator LED will ash red once every seconds and a 10

“DUDU” sound will come up every one minute.

4. Turn on / o

Turn on : From o, press and hold “MFB” for around 4 seconds, unl the LED indicator shows blue.

Turn o : From on, press and hold “MFB” for around 4 seconds unl the LED indicator shows red.

5. Working with mobile phone (Tutorial online)

It is important to pair the headset with your Bluetooth enabled mobile phone for rst me use.

5.1 Pairing procedure:

A. Ensure the headset is o.

B. Press and hold the MFB buon (about 7-10 seconds) unl the LED blinks and blue red

alternately.

C. Search for the headset from your phone.

D. Once “Avantree Jogger Pro’’ is found in the search list, follow the indicated steps and enter pin

code 0000 to pair (some phones do not request the pin code).

E. Connect the headset to your phone.

F. Your headset is now ready for use.

Once paired and connected, the headset will be automacally connected to your phone whenever

you turn the headset on again, provided your phone is within range.

We nd most of the online technical support quesons are caused by improper pairing between the

headset and the Bluetooth device. Please follow the above instrucons step- -step. by

5.2 Basic Operaons:

● Answer a call:

To answer a call: Press “MFB” once to answer the call.

To answer a second call: Press “MFB” once to answer a second call and end the rst call

simultaneously.

● End a call : Press the “MFB” buon once to end a call.

● Reject a call :

Reject a call: Press and hold the “MFB” buon for 3 seconds to reject a call.

Reject a second call: Press the “Previous” buon once to reject a second call.

● Voice Dial: Short press both ”V+” and “V ” whilst in standby mode, then say the voice tag you -

wish to call. (Note: Make sure your phone supports voice dialing.)

● Last number redialing : In standby mode, double click the “MFB” buon.

● To Switch a call between headset and mobile phone:

From Headset to Mobile Phone: During a call, press and hold “MFB” for 2 seconds to transfer the

call to your mobile phone.

From Mobile Phone to Headset: During a call, press and hold “MFB” for 2 seconds to transfer the

call to your headset.

● To Mute & Unmute during a conversaon:

Mute the microphone: Press and hold the “Next” buon unl you hear a short beep. In mute status,

you will hear two short beeps every 3 seconds.

Unmute the microphone: Press and hold the “Next” buon again unl you hear a further short

beep.

● To Restore Default Sengs: In standby mode (just turn it on), press and hold “Next” buon for 8

seconds unl the indicator ashes blue and red. The headphone has now been reset to its original

sengs. Aer being powered on again, it will enter pairing mode automacally.

5.3 Music Streaming

Please acvate your phone’s music player before listening to music on the headset. For some

phones, music will automacally be heard on your headset, other phones you will need to manually

transfer music from your phone to the headset.

 Volume Up: Press and hold the “Volume +” buon, or for small incremental increases, short

press the “Volume +” buon.

 Volume Down: Press and hold the “Volume “ buon, or for small incremental decreases, short -

press “Volume “ buon.-

 To Play Music : Press the “MFB” buon.

 Pause : Press the “MFB” buon again.

 Previous Track : Press the “Previous” buon.

 Next Track: Press the “Next” buon.

Notes: 1) Some funcons are dependent on the mobile phone being used with the headset. Therefore,

certain features might not work with all phones as some phones do not support them.

2) For some phones, when power saving mode is activated with animated moving images,

music output may be interrupted. If this happens, try changing the power saving mode to a

non-moving image.

5.4 Advanced Operaons - Mulpoint

5.4.1 Pairing with two mobile phones

1) From OFF, press and hold buon MFB for 7-10 seconds unl the LED indicator blinks blue and

red alternately, then pair with the rst phone as per normal (see Secon 5.1).

2) Now press a -nd hold the “V ” buon unl the LED indicator blinks blue and red again, then pair

with the second phone in the normal manner.

3) Power o the headset, and then turn it on again. It will automacally connect with the last

paired phone. Then connect the rst phone manually.

5.4.2 Answer a second call during a call (3 way call or two link funcon)

When a second call is received -

P s to hold the rst call and answer the second call. ress and hold ”V+” buon for 2 second

Press “MFB” once to answer a second call and end the rst call simultaneously.

5.4.3 Reject a second call during a call (3 way call or two link funcon)

When a second call is received, press the “Previous” buon once to reject the second call.

5.4.4 Switch between 2 phone calls (3 way call or two link funcon)

When two calls are in progress, press and hold the “V+” buon for 2 seconds to switch between

each call.

To end the currently acve call and switch to the other call, short press the “MFB” buon once.

6. Working with a PC or Laptop (Tutorial online)

For computers running Microso Windows with Built-in Bluetooth supporng A2DP. For other

systems, you might need a Bluetooth dongle to work with your computer. Your Bluetooth headset

doesn’t need any special drivers to set up. For any updated driver informaon, please refer to your

computer manufacturer or to the dongle manufacturer.

6.1 Pairing procedure:

A. Ensure your computer has built-in Bluetooth as above and that Bluetooth is turned on.

B. Double click the Bluetooth icon and click “Add a new device”.

C. Once the “Avantree Jogger Pro’’ is found in the search list, follow the steps indicated by the

computer. If asked for a pin code during this process, enter “0000”.

D. Pair the headset to your PC.

E. Your headset is now ready for use.

6.2 Streaming Music

Before streaming music, you need to change the sound sengs. Go to “Control Panel” – “Sound” –

“Playback” and change the audio seng to “Bluetooth Stereo Audio”.

Controlling music while streaming

● Pause: During music streaming, press the “MFB” buon to pause. Press the buon again to

resume streaming.

● Volume Up: Press and hold the “Volume +” buon, or short press the buon to get small,

incremental increases.

● Volume Down: Press and hold “V –” buon, or short press the buon for small, olume

incremental decreases.

Product specificaties

Merk:	Avantree
Categorie:	Oordopje
Model:	Jogger Pro

Heb je hulp nodig?

Als je hulp nodig hebt met Avantree Jogger Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Oordopje Avantree

Avantree Medley Pebble Handleiding

9 September 2024

Avantree Sky Ace Handleiding

9 September 2024

Avantree HT41866 Handleiding

9 September 2024

Avantree Torus Handleiding

9 September 2024

Avantree Repose Handleiding

9 September 2024

Avantree Sacool Handleiding

13 Mei 2023

Avantree Jogger Pro Handleiding

12 Mei 2023

Handleiding Oordopje

Nieuwste handleidingen voor Oordopje

Cellular Line Roller Clip Classic Handleiding

18 December 2024

JVC HA-C300 Handleiding

14 December 2024

JAYS t-Two Handleiding

14 December 2024

BlueAnt X5i Handleiding

8 December 2024

BlueAnt Pump Air Ultra Handleiding

8 December 2024

JBL Reflect Aero Handleiding

8 December 2024

Audio-Technica ATH-TWX7 Handleiding

6 December 2024

Audio-Technica ATH-SQ1TW2 Handleiding

6 December 2024

Audio-Technica ATH-MVL2_JV Handleiding

6 December 2024

Audio-Technica ATH-CKS30TW Handleiding

6 December 2024