AudioControl ACX-BT1 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor AudioControl ACX-BT1 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 226 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
BLUETOOTH RECEIVER WITH APTXā„¢ HD SUPPORT
Quick Start Guide
Features
ā€¢ Compact, elegant design with no buttons or switches
ā€¢ aptXā„¢ HD Support
ā€¢ BT v4.1 chip set
ā€¢ All-weather IPX5 rated
ā€¢ Universal design works with any ampliļ¬er or device with line
level (RCA) inputs
ā€¢ Unique remote turn-on output circuit
ā€¢ Paciļ¬c Northwest freshness built-in!
2
Quick Start Guide
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not submerge this apparatus in water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturerā€™s instructions.
8. Do not install near any heat sources such as muļ¬„ers, silencers, exhaust
pipes, or other apparatus (including ampliļ¬ers) that produce heat.
9. WARNING: Improper installation may lead to permanent injury or death.
Installation of the apparatus must be done with great care by qualiļ¬ed
personnel, to prevent damage to fuel lines, power and other electrical
wiring, hydraulic brake lines, and other systems, that might compromise
vehicle safety.
10. Provide +12v and ground wiring of suļ¬ƒcient size to ensure adequate
current to the receiver. For the ACX-BT1, this means 16-22 gauge wire.
11. Use rubber grommets to protect wiring whenever passing wires through
metal openings or bulkheads.
12. Only use attachments/accessories speciļ¬ed by the manufacturer.
13. Refer all servicing to qualiļ¬ed service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power in-
put terminals are damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
14. Fuses shall be replaced only with the correct type and fuse value, and
only when the apparatus is powered oļ¬€.
15. Exposure to high sound pressure levels may lead to permanent hearing
loss. Take every precaution to protect your hearing.
The lightning ļ¬‚ash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
ā€œdangerous voltageā€ within the productā€™s enclosure, that may be of
suļ¬ƒcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
Caution: to reduce the risk of electric shock, do not disassemble the appara-
tus, other than to remove the top panel to access the controls. There are no
user-serviceable parts inside. Refer servicing to
qualiļ¬ed personnel.
Recycling notice: If the time comes and this
apparatus has fulļ¬lled its destiny, do not
throw it out into the trash. It has to be
carefully recycled for the good of mankind, by a facility specially
equipped for the safe recycling of electronic apparatii. Please con-
tact your local or state recycling leaders for assistance in locating
a suitable nearby recycling facility. Or, contact us and we might be
able to repair it for you.
3
1. Remote Turn-On Output (Blue) 12v DC/20mA ā€“ This remote
output is designed to turn on a connected ampliļ¬er. This output
is only active after audio has begun playing and will remain active
for approximately 7 seconds after audio playback has ceased.
2. 12 Volt Power Input (Fused @ 2A) (Red) ā€“ Connect this lead
to an accessory (switched) power source from your vehicle. If
no switched power source is available, a rocker or toggle switch
could also be used to turn the unit on/oļ¬€.
Note: Depending on the vehicle type and application, you may wish
to connect this lead to a constant 12V power source instead. Be aware
that if the unit is connected in this manner that there will be a small
amount of constant current drawn from the connected power source.
3. Ground Input (Black) ā€“ Connect this lead to a solid ground con-
nection from your vehicle.
4. Left RCA line level output (Gray) ā€“ This RCA lead connects to the
LEFT low-level input of your ampliļ¬er or source unit.
5. Right RCA line level output (Blue) ā€“ This RCA lead connects to
the RIGHT low-level input of your ampliļ¬er or source unit.
Remote, Power, and Output Connections
q
w
e
r
t


Product specificaties

Merk: AudioControl
Categorie: Niet gecategoriseerd
Model: ACX-BT1

Heb je hulp nodig?

Als je hulp nodig hebt met AudioControl ACX-BT1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd AudioControl

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd