Audac CIRA8 Handleiding

Audac Speaker CIRA8

Lees hieronder de 📖 handleiding in het Nederlandse voor Audac CIRA8 (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
INSTALLATION MANUAL
CIRA SERIES QUICK-FITâ„¢ CEILING SPEAKERS WITH TWIST-FIXâ„¢ GRILL
STEP 1 STEP 2
Cut a hole on the mounting location in the ceiling.
Make sure the diameter is matching the cut-out
measurement for the installing loudspeaker.
Double check if there are no cables or other
obstructions behind the mounting surface before
making the cut-out.
Connect the wires coming from the ampliî ´er to the
FastConâ„¢ terminal block connector on the loudspeaker.
The correct power tapping is chosen by connecting the
appropriate terminals of the connector. A description
of the power tap selection is shown on the magnet
sticker on the rear side of the loudspeaker.
When using 100V speakers in low impedance mode
(8Ω), disconnect the ground wires by interrupting the
cable lugs.
Ø Diameter
STEP 3 STEP 4
Make sure the mounting clamps are fully bended
inwards, allowing the speaker î ´t through the cut-out.
Insert the speaker to the opening.
Fix the speaker in the provided opening by tightening
the screws of the mounting clamps using a screw
driver. A quarter turn will make the mounting clamps
î µip-out, locking the speaker in place. Tighten the
screws for proper î ´xation of the speaker.
STEP 5 STEP 6
Attach the grill to the speaker by inserting the lips
into the provided openings on the speaker baî¡že and
rotating it over a partial turn (15°).
The speaker is now correctly installed and ready for
use.
The WEEE marking indicates that this product
should not be disposed with regular household
waste at the end of its product life. This regulation
is created to protect both the environment and
human health.
This product is developed and manufactured with
high quality materials and components which can
be recycled and/or reused. Please dispose of this
product at your local collection point or recycling
center for electrical and electronic waste. Do this
to make sure that the product is recycled in an
environmental friendly way, and help to protect
the environment in which we all live.
INSTALLATION MANUAL
CIRA SERIES QUICK-FITâ„¢ CEILING SPEAKERS WITH TWIST-FIXâ„¢ GRILL
•
IF THERE IS ANY DAMAGE TO THE CARTON BOX
OR THE UNIT ITSELF, INFORM YOUR VENDOR
IMMEDIATELY.
•
ALWAYS FOLLOW THE LOCAL REGULATIONS AND
REQUIREMENTS REGARDING INSTALLATION,
SUSPENSION AND CONNECTION OF THIS
LOUDSPEAKER. EVEN WHEN OTHERWISE SPECIFIED
IN THIS DOCUMENT.
• THE INSTALLATION OF THIS LOUDSPEAKER SHALL
BE DONE BY QUALIFIED PERSONNEL ONLY.
•
USE CABLES OF THE RIGHT GAUGE TO CONNECT
THE LOUDSPEAKER
•
USE CABLES WITH CLEAR COLOR CODING
INDICATING THE POLARITY AND MAINTAIN THE
SAME POLARITY THROUGHOUT THE WHOLE
SYSTEM.
•
ONLY USE THE CORRECT AMPLIFIER OUTPUT
VOLTAGE AND IMPEDANCE. EXCEEDING THESE
LIMITS COULD CAUSE FIRE OR OTHER FAILURES.
•
AVOID EXPLOSIONS: DO NOT USE THE SPEAKER
AROUND GASOLINE, THINNER OR OTHER
COMBUSTIBLES
•
AVOID ELECTRIC SHOCKS: SWITCH OFF THE
AMPLIFIER WHEN CONNECTING THE LOUDSPEAKER
•
DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED
PERIOD OF TIME AT DISTORTED SOUND. THIS
COULD CAUSE PERMANENT DAMAGE.
•
ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE. NEVER THROW THEM AWAY
• ALWAYS HANDLE THIS UNIT WITH CARE
• CLEAN ONLY WITH DRY CLOTH
•
HEED ALL WARNINGS AND FOLLOW ALL
INSTRUCTIONS
•
NEVER EXPOSE THIS EQUIPMENT TO RAIN,
MOISTURE, ANY DRIPPING OR SPLASHING LIQUID.
•
DO NOT INSTALL THIS UNIT NEAR ANY HEAT
SOURCES SUCH AS R ADIATOR S OR OTHER
APPARATUS THAT PRODUCE HEAT
•
DO NOT PLACE THIS UNIT IN ENVIRONMENTS
WITH A HIGH LEVEL OF DUST, HEAT, MOISTURE OR
VIBRATION
• THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY.
DO NOT USE IT OUTDOORS
•
ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED
BY THE MANUFACTURER.
•
ONLY INSTALL THE SPEAKER IN LOCATIONS THAT
CAN STRUCTURALLY SUPPORT THE WEIGHT OF THE
SPEAKER. IGNORING THIS CAN BRING THE SPEAKER
DOWN.
•
DO NOT USE ANY OTHER METHOD THAN SPECIFIED
TO MOUNT THE SPEAKER. IF EXTREME FORCE IS
APPLIED TO THE SPEAKER, IT COULD FALL DOWN
•
ATTACH A SAFETY WIRE TO THE SPEAKER WHEN
IT IS MOUNTED HIGH UP. ONLY USE INDUSTRY-
ACCEPTED RIGGING TOOLS AND METHODS
• CAREFULLY CHECK THE UNIT’S CONDITION AFTER
UNPACKING.
PRECAUTIONS
This product contains no user serviceable parts.
Refer all servicing to qualiî ´ed service personnel. Do
not perform any servicing (unless you are qualiî ´ed
to do so.)
CAUTION - SERVICING
This product conforms to all the essential
requirements and further relevant speciî ´cations
described in following directives: 2014/30/EU (EMC)
and 2014/35/EU (LVD)
EC DECLARATION OF CONFORMITY
WASTE OF ELECTRICAL AND ELECTRONIC
EQUIPMENT (WEEE)
Model Max. Power RMS Power Cut-out
dimension
Dimensions Line transformer power
tappings - Impedance
CIRA506
CIRA524
CIRA530D
CIRA724
CIRA730D
CIRA824
CIRA840D
60 Watt
60 Watt
60 Watt
60 Watt
60 Watt
80 Watt
80 Watt
30 Watt
30 Watt
30 Watt
30 Watt
30 Watt
40 Watt
40 Watt
Ø 170 mm
Ø 170 mm
Ø 170 mm
Ø 200 mm
Ø 200 mm
Ø 243 mm
Ø 243 mm
Ø 193 x 83 mm
Ø 193 x 83 mm
Ø 193 x 83 mm
Ø 224 x 78 mm
Ø 224 x 78 mm
Ø 270 x 82 mm
Ø 270 x 82 mm
6W / 3W / 1.5W - 8 Ω
24W / 12W / 6W - 8 Ω
16 Ω
24W / 12W / 6W - 8 Ω
16 Ω
24W / 12W / 6W - 8 Ω
16 Ω


Product specificaties

Merk: Audac
Categorie: Speaker
Model: CIRA8

Heb je hulp nodig?

Als je hulp nodig hebt met Audac CIRA8 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Audac

Audac

Audac CENA710D Handleiding

27 September 2024
Audac

Audac CIRA724 Handleiding

27 September 2024
Audac

Audac CIRA730D Handleiding

27 September 2024
Audac

Audac CENA306 Handleiding

27 September 2024
Audac

Audac CENA506 Handleiding

27 September 2024
Audac

Audac CENA510D Handleiding

27 September 2024
Audac

Audac CENA812 Handleiding

27 September 2024
Audac

Audac CIRA824 Handleiding

27 September 2024
Audac

Audac WS624D Handleiding

27 September 2024
Audac

Audac RMA45M Handleiding

28 Maart 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker