Atlas Sound SM12CXTW Handleiding

Atlas Sound Speaker SM12CXTW

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlas Sound SM12CXTW (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
1/2
AtlasSound.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2009 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS001610 RevD 3/09
SM8CXT & SM12CXT
Surface Mount 8" & 12" Speaker Systems
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
General Description
The Atlas Sound SM8CXT and SM12CXT are designed for 8 and 70.7V distributed Ω
applications where high output and accurate sound reproduction are required. Both
models feature a unique compact cabinet design with multiple 1⁄ "-20 inserts to 4
allow easy suspension or wall mounting. The dual angle design also allows the sys-
tems to be used as a short or long throw stage monitor system
The SM8CXT includes the Atlas Sound 8CXT60 compression driver coaxial loud-
speaker. The SM12CXT includes the Atlas Sound 12CXT60 compression driver
coaxial loudspeaker. Originally conceived for high ceiling distributed systems, these
systems exhibit incredible efficiency and fidelity. Both models utilize a uniquely
designed conical wave-guide high frequency director providing accurate 90° cover-
age in the 2kHz octave band.
Features
• Multiple1
⁄ "-20 Inserts, Providing Fly Points for a Variety of Mounting 4
Configurations
• IncludesInternal,HighEfficiency,60Watt70.7V/100VTransformer(MayBe
Bypassed for 8 Operation)Ω
• BarrierStripInputfor70.7V/100V/8Ω or Parallel 4-pole Speak-On
™Input(for
8 Operation Only).Ω
• UniqueInputPanelAllowsUseofStandard4"SquareBoxCover
(Raco753oreq.)forApplicationsWhereFlexConduitisRequiredfor
Termination
• FuseProtectionforLowandHighFrequencyDrivers
• Attractive,YetHeavy-DutyGrilleAssembly
• DurableBlackorWhite,Rough-CoatFinish
• OptionalBracketforWallMounting
• Omnimount™ Compatible
Applications
• SchoolAuditoriums,Gymnasiums&Cafetoriums
• ChurchSanctuarySystems(F.O.H.and/orMonitors)
• High-LevelForegroundMusicSystems
• GeneralLiveSoundReinforcement(InstalledorPortable)
Unpacking
As part of our commitment to providing you the highest quality product possible we
make sure every Atlas Sound product is carefully tested and inspected before being
shipped from our factory. Please inspect your loudspeaker for any damage that may
have occurred during shipping.
In the event of shipping damage notify your freight carrier immediately.
Amplifier Considerations for 8 OperationΩ
Note: The input barrier strip includes a jumper which when removed activates the
8 input on the barrier strip and the Speak-On jacks.Ω
Consult your amplifier owner’s manual to confirm power output at the rated imped-
ance.AtlasSoundspeakersystemspecificationslistRMSpowerhandling.As
areference,peakpower=RMSx1.414.Theseratingsshouldbeconsideredin
selecting the best amplifier to power the speaker system.
Forgeneraluse,amplifieroutputshouldmatchorexceedtheRMSratedpowerof
the speaker system.
For increased headroom and dynamic reproduction, the amplifier’s output should
match or exceed the peak power rating of the speaker system.
In situations where experienced professionals are operating the speaker system
with proper limiting and frequency control devices inserted into the signal path and
adjustedproperly,amplifieroutputmaymeet,butshouldnotexceed2xtheRMS
power rating of the speaker system.
SM8CXT
SM12CXT
Specifications
Model SM8CXT SM12CXT
Frequency Response (±3dB) 60Hz–15kHz 55Hz–15kHz
Power Handling 150WattsRMS 250WattsRMS
Transformer Taps 7.5,15,30,&60 Watts 7.5,15,30,&60Watts
Sensitivity (1W / 1M) 92dB 99dB
Maximum SPL @ 1 Meter (Rated
Power @ 8Ω)
114dB 123dB
Nominal Driver Impedance 8 8Ω Ω
Dispersion (2kHz Octave Range) 90° 90°
Height 151⁄2"(394mm) 19"(483mm)
Width 105⁄ 148"(270mm) 1
⁄2"(368mm)
Depth 103⁄ 148"(264mm) 1
⁄16"(357mm)
Weight 19lbs (8.62kg) 39lbs(17.7kg)
LF Transducer
Basket Material Cast Aluminum Cast Aluminum
Cone Material Polypropylene Treated Paper
Surround Material & Dampening ThermalPlasticElastomer ClothEdge
Voice Coil Diameter 2"(51mm) 2
1⁄2"(63.5mm)
Magnet Weight 34oz 70oz
HF Comp. Driver
Diaphragm Material Titanium Titanium
Voice Coil Diameter 1"(25mm) 2"(51mm)
Voice Coil Former Material Kapton® Kapton®
Voice Coil Material Copper Copper
Throat Diameter .925"(23.5mm) 1"(25mm)
Magnet Weight 20oz 40oz
Side ViewFront View
<-Front
WIDTH
1 4 " ( 36 8mm)
1
/2
1 9" (483 m m)
HEIGHT
DEPTH
1 4 " ( 35 7mm)
1 /
16
WIDTH
1 0 " ( 27 0mm)
5
/8
1 5 " ( 39 4mm)
1
/2
HEIGHT
DEPTH
1 0 " ( 26 4mm)
3/
8
Side View
<-Front
Front View
2/2
AtlasSound.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2009 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS001610 RevD 3/09
SM8CXT & SM12CXT
Surface Mount 8" & 12" Speaker Systems
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Hook-Up
For 70.7V terminations, a barrier strip is provided to accommodate two #14 strand-
ed cables. All tap selections are clearly marked on the input cup. Connection is
madetothecommonterminal(–)andthedesiredpowertap(+).
This barrier strip also includes a jumper which should only be removed to activate
the 8 inputs on the barrier strip and the Speak-On jacks. The pins of the 2 Speak-Ω
On sockets identified on the rear of the input panel and are paralleled for connecting
additional speakers or subwoofers
     Pin1+isPositive Pin1-isNegative
Adding Passive Subwoofers
Pins1+,1-,2+2-areconnectedinternallybetweenthetwospeak-onconnectors
allowinguseof4conductorspeakerwiretothefullrangeloudspeaker(pins1+,
1- for full range) with a “through” connection to a subwoofer like the Atlas Sound
SM8SUB70(pins2+,2-forsub).ForaworldwidelistofNeutrikdistributorssee
http://www.neutrik.com
Note: that the input terminal cup includes corner threaded inserts to accommodate
standard four square electrical box cover (RACO #753 or equivalent). The
cover allows for conduit connections directly to the input cup.
Wire Gauges (8 operation)Ω
Forveryshortdistancespeakercableruns(lessthan25')#16-Gauge,stranded,
twistedpairspeakercablemaybeused.Forspeakercablerunsbetween25'and
75',#14-Gauge, stranded, twisted pair speaker cable is recommended. For speaker
cablerunsgreaterthan75'#12-Gauge,stranded,twistedpairspeakercableisnec-
cessary(NeutrikConnectorONLY).
Wire Gauges (70.7V operation)
Use#18 /2strandedtwisted(plenumratedifnecessaryperlocalcode)forspeaker
cablerunsupto2000'.Fordistancesover2000'pleaseconsultyourcablesupplier
for suggested wire gauges.
Overhead Suspension
Suspension or flying speaker systems require training and expertise. Improper rig-
ging of a flying speaker may result in injury, death, equipment damage, and legal
liability.
Installation must be carried out by fully qualified installers, in accordance with all the
requiredsafetycodesandstandardsthatareappliedattheplaceofinstallation.5:1
design factor is a generally accepted design standard. However, legal requirements
for flying vary by municipality, please consult you local safety standards office
beforeinstallinganyproduct.Wealsorecommendthatyouthoroughlycheckany
laws and bylaws prior to installation.
If you lack the skills, training, and proper ancillary equipment to fly a speaker system
do not attempt to do so.
TheAtlasSoundSM8CXT&SM12CXTsystemscontainmultiple
1⁄ "-20 inserts to 4
allow most any suspension angle conceivable. ONLY LOAD RATED & CERTIFIED
HARDWARE (EYEBOLTS & CABLE) SHOULD BE USED IN THE INSTALLATION
OF THIS PRODUCT.
These products are available from:
 AdaptiveTechnologiesGroup
1635EastBurnettStreet
Office:562.424.1100
Fax:562.424.3520
Loudspeakersflownintheatres,nightclubs,conferencecentersorotherplacesof
work and entertainment must be provided with an independent, correctly rated and
securelyattachedsecondarysafety–inadditiontotheprinciplesuspensionpoint(s).
Thissecondarysafetymustpreventtheloudspeakerfromdroppingmorethan(6")
should the principle suspension device fail.
Surface Mounting
Optional C-brackets are available for wall or surface mounting of the SM8CXT and
the SM12CXT. For the SM8CXT specify the SM8CBKT mounting bracket. For the
SM12CXT specify the SM12CBKT.
WhenevertheloudspeakerismountedtoasurfaceusingtheoptionalC-bracket,
the installer must ensure that the surface is capable of safely and securely support-
ing the load. The hardware employed must be safely and securely attached both to
the loudspeaker and the surface in question, using only the mounting holes If you
are unsure of the integrity of the mounting surface please seek assistance from
architects, structural engineers or other specialists.
Omnimount™
Inserts are provided on the top, bottom and back of both models to accommodate
Omnimount™brackets.UsetheOmnimount
™30SeriesfortheSM8CXTandthe
Omnimount™ 60 Series for the SM12CXT.
Stand Mounting
The optional Atlas Sound SSA7 can be used with the top or bottom inserts to facili-
tate stand mounting for portable use.
Hearing Damage
CAUTION: These professional loudspeaker systems are capable of generating very
highsoundpressurelevels.Usecarewithplacementandoperationtoavoidexpo-
sure to excessive levels that can cause permanent hearing damage.
Outdoor Use
The systems should not be flown or used in permanent outdoor applications under
any circumstances.
Fuse Protection
Unitsareshippedwitha20AfuseinstalledinboththeLFandHFsocket.Thishigh
current fuse functions as a through connection and offers no protection. If fuse
protection is desired please replace the 20A fuse with the following values. For the
SM8CXT:3ALFFuse/2AHFFuse.FortheSM12CXT:4ALFFuse/4AHFFuse.
Warranty
AllproductsmanufacturedbyAtlasSoundarewarrantedtotheoriginaldealer/installer,industrialorcommercial
purchaser to be free from defects in material and workmanship and to be in compliance with our published speci-
fications, if any. “This warranty shall extend from the date of purchase for a period of five years on all Atlas Sound
products except as follows: one year on electronics and control systems; one year on replacement parts. Additionally,
fuses and lamps carry no warranty.”
Atlas Sound will solely at its discretion, replace at no charge defective parts or products when the product has been
appliedandusedinaccordance withourpublishedoperationandinstallationinstructions.Wewillnotberesponsible
fordefectscausedbyimproper storage,misuse(includingfailure toprovidereasonableandnecessarymaintenance),
accident, abnormal atmospheres, water immersion, lighting discharge, or malfunctions when products have modified
or operated in excess of rated power, altered, serviced or installed in other than a workmanlike manner. The original
sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must
comply with our returns policy set forth below.
WhenproductsreturnedtoAtlasSounddonotqualifyforrepairor replacementunderourwarranty, repairsmaybe
performed at prevailing costs for material and labor unless there is indeed a written request for an estimate of repair
costs before any non-warranty work is performed. In the event of replacement or upon completion of repairs, return
shipment will be made with the transport charges collect.
EXCEPTTOTHEEXTENTTHATAPPLICABLELAWPREVENTSTHELIMITATIONOF CONSEQUENTIALDAMAGES
FORPERSONALINJURY,ATLAS SOUNDSHALLNOTBELIABLEIN TORTORCONTRACTFORANYDIRECT,
CONSEQUENTIALOR INCIDENTAL LOSSORDAMAGEARISINGOUTOFTHEINSTALLATION,USEORINABILITY
TOUSETHEPRODUCTS.THE ABOVEWARRANTY ISINLIEU OFALLOTHER WARRANTIES INCLUDINGBUTNOT
LIMITEDTO WARRANTIES OFMERCHANTABILITYANDFITNESSFORAPARTICULAR PURPOSE.
Atlas Sound does not assume, or does it authorize any other person to assume or extend on its behalf, any other
warranty, obligation or liability. This warranty gives you specific legal rights and you may have other rights that vary
from state to state.

Product specificaties

Merk: Atlas Sound
Categorie: Speaker
Model: SM12CXTW

Heb je hulp nodig?

Als je hulp nodig hebt met Atlas Sound SM12CXTW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Atlas Sound

Atlas Sound

Atlas Sound IP-8SM Handleiding

17 November 2024
Atlas Sound

Atlas Sound IP-SDM Handleiding

9 Juli 2023
Atlas Sound

Atlas Sound M1000-W Handleiding

9 Juli 2023
Atlas Sound

Atlas Sound I8SM+ Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound PM8GD-B Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound SMA-15 Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound GD87W Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound DT22 Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound All Weather SM63T Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound PM8SUB Handleiding

8 Juli 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Philips

Philips Fidelio FW1 Handleiding

24 November 2024
Philips

Philips Fidelio DS7650 Handleiding

23 November 2024
Braun

Braun LE03 Handleiding

23 November 2024
HK Audio

HK Audio L5-112X Handleiding

23 November 2024
Samson

Samson Rubicon R8a Handleiding

22 November 2024
Sony

Sony SS-SPG01 Handleiding

22 November 2024
Sony

Sony SS-MB200H Handleiding

22 November 2024
Sony

Sony SS-MB300H Handleiding

22 November 2024
JBL

JBL Studio 690 Handleiding

22 November 2024
JBL

JBL Studio 680 Handleiding

22 November 2024