Atlas Sound FAP42T-UL2043 Handleiding

Atlas Sound Speaker FAP42T-UL2043

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Atlas Sound FAP42T-UL2043 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
AtlasSound.com 1/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
ยฉ2009 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS003677 RevA 9/09
Strategy Seriesยฎ II 4" Loudspeaker System
FAP42T-UL2043
Speci๏ฌcations
Woofer Size 4" (102mm)
Power Handling 25 Watts
Transformer Taps at 70.7V 1, 2, 4, 8, & 16 Watts
Sensitivity (1W / 1M) 88dB Average
Frequency Response 75Hz โ€“ 20kHz (ยฑ7dB)
Magnet Weight 10oz (364g)
Cut-Out Diameter 9" (229mm)
Height 87โ„ " (225mm)8
Diameter 101โ„ " (267mm)2
Woofer 4" Poly Cone with Butyl Rubber Surround
HF Driver Coaxially Mounted PEI Dome Tweeter
Features
โ€ข๎ƒŠ ๎ƒŠ๎ƒŠExtended๎ƒŠlow๎ƒŠfrequency๎ƒŠresponse๎ƒŠfrom๎ƒŠthe๎ƒŠ285๎ƒŠin
3 optimally tuned
and ported deep drawn, galvanized steel enclosure
โ€ข๎ƒŠ ๎ƒŠ๎ƒŠEasy๎ƒŠinstallation๎ƒŠin๎ƒŠdrop๎ƒŠtile๎ƒŠor๎ƒŠsheetrock๎ƒŠceilings๎ƒŠvia๎ƒŠC-Ring๎ƒŠ/๎ƒŠV-Rail๎ƒŠ
tile bridge and "Dog Leg" mounting system (Included)
โ€ข๎ƒŠ ๎ƒŠ๎ƒŠFront๎ƒŠmounted๎ƒŠtap๎ƒŠselector๎ƒŠswitch๎ƒŠfor๎ƒŠeasy๎ƒŠsystem๎ƒŠtuning๎ƒŠ
adjustments includes transformer bypass setting for 8 / direct ฮฉ
coupled operation
โ€ข๎ƒŠ ๎ƒŠ๎ƒŠUnique๎ƒŠ"trap๎ƒŠdoor"๎ƒŠinput๎ƒŠsection๎ƒŠallows๎ƒŠfor๎ƒŠthrough๎ƒŠconduit๎ƒŠruns๎ƒŠwith๎ƒŠ
rigid or flex conduit
โ€ข๎ƒŠ ๎ƒŠ๎ƒŠ4๎ƒŠPole๎ƒŠdetachable๎ƒŠPhoenix๎ƒŠstyle๎ƒŠ/๎ƒŠEuro๎ƒŠconnector๎ƒŠallows๎ƒŠeasy๎ƒŠ
pre-wiring and is convenient for daisy chaining additional Strategy
Series full range speakers or subwoofers
โ€ข๎ƒŠ ๎ƒŠ๎ƒŠโ€œPress๎ƒŠfitโ€๎ƒŠgrilles๎ƒŠblend๎ƒŠbetter๎ƒŠinto๎ƒŠcontemporary๎ƒŠarchitecture
โ€ข๎ƒŠ ๎ƒŠ๎ƒŠEnhanced๎ƒŠquality๎ƒŠ70.7V๎ƒŠ/๎ƒŠ100V๎ƒŠinternal๎ƒŠtransformers๎ƒŠminimize๎ƒŠ
insertion loss and maintain low frequency response while providing
increased output for higher SPL applications
โ€ข๎ƒŠ ๎ƒŠUL๎ƒŠ1480๎ƒŠ&๎ƒŠ2043๎ƒŠListed
Applications
FAP42T-UL2043๎ƒŠcombines๎ƒŠsuperior๎ƒŠcoaxial๎ƒŠloudspeaker๎ƒŠperformance๎ƒŠwith๎ƒŠ
wide dispersion and easy installation. A low profile enclosure and wide
๎ƒŠcoverage๎ƒŠmake๎ƒŠthe๎ƒŠFAP42T-UL2043๎ƒŠa๎ƒŠperfect๎ƒŠchoice๎ƒŠfor๎ƒŠlow๎ƒŠceilings.๎ƒŠThe๎ƒŠ
FAP42T-UL2043๎ƒŠwill๎ƒŠsatisfy๎ƒŠthe๎ƒŠneeds๎ƒŠof๎ƒŠowners,๎ƒŠarchitects,๎ƒŠcontractors,๎ƒŠ
and consultants by delivering true, high fidelity sound reproduction in
an๎ƒŠattractive๎ƒŠand๎ƒŠeasy-to-install๎ƒŠsystem.๎ƒŠThe๎ƒŠFAP42T-UL2043๎ƒŠis๎ƒŠideal๎ƒŠfor๎ƒŠ
high-intelligibility voice, music, and signal reproduction in commercial,
industrial,๎ƒŠand๎ƒŠinstitutional๎ƒŠapplications.๎ƒŠThe๎ƒŠFAP42T-UL2043๎ƒŠis๎ƒŠUL1480๎ƒŠ
and๎ƒŠUL2043๎ƒŠlisted๎ƒŠallowing๎ƒŠfor๎ƒŠinstallation๎ƒŠin๎ƒŠtrue๎ƒŠplenum๎ƒŠair๎ƒŠspaces.๎ƒŠ
FAP42T-UL2043
AtlasSound.com 2/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
ยฉ2009 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS003677 RevA 9/09
General Description
The๎ƒŠFAP42T-UL2043's๎ƒŠ130หš๎ƒŠdispersion๎ƒŠangle๎ƒŠeffectively๎ƒŠreduces๎ƒŠthe๎ƒŠ
number of loudspeakers necessary to achieve coverage in distributed
systems with low ceilings.
The loudspeaker component matches the performance of the legendary
Atlas Sound Strategy FA Series. High quality construction 4" coaxial cone
type๎ƒŠdriver๎ƒŠincludes๎ƒŠa๎ƒŠ1โ€๎ƒŠvoice๎ƒŠcoil๎ƒŠand๎ƒŠpolypropylene๎ƒŠcone๎ƒŠwith๎ƒŠa๎ƒŠbutyl๎ƒŠ
rubber surround. The 19mm coaxially mounted tweeter is constructed
of PEI. A high sensitivity level means less power may be required to
achieve the desired SPL. This loudspeaker is factory assembled in an
optimally tuned & ported deep drawn enclosure and includes a specially
designed 16 Watt low saturation 70.7V / 100V transformer. A convenient
front mounted selector switch allows tap selection without the need
to remove the speaker from the ceiling. This switch also includes a
transformer bypass setting for 8 direct coupled operation.ฮฉ
Mounting Accessories
Mounting๎ƒŠis๎ƒŠsimplified๎ƒŠwith๎ƒŠStrategy๎ƒŠstyle๎ƒŠโ€œDog๎ƒŠLegโ€๎ƒŠtabs๎ƒŠthat๎ƒŠallow๎ƒŠ
easy installation into drop tile or drywall ceilings with provided tile bridge
assembly.๎ƒŠThe๎ƒŠtile๎ƒŠbridge๎ƒŠconsists๎ƒŠof๎ƒŠtwo๎ƒŠโ€œVโ€๎ƒŠshaped๎ƒŠformed๎ƒŠmounting๎ƒŠ
rails and a C-Ring assembly. The C-Ring can be attached to the rails with
the screws provided to extend support to the T-Bar grid in suspended
ceiling applications. Multiple hole locations are provided to allow the
C-Ring to be positioned to the outer edge the tile if necessary.
For existing dry-wall applications the tile bridge C-Ring and support
rails๎ƒŠcan๎ƒŠbe๎ƒŠinserted๎ƒŠinto๎ƒŠthe๎ƒŠhole๎ƒŠcut๎ƒŠfor๎ƒŠthe๎ƒŠFAP42T-UL2043.๎ƒŠFor๎ƒŠeasy๎ƒŠ
๎ƒŠpositioning๎ƒŠthe๎ƒŠโ€œVโ€๎ƒŠshaped๎ƒŠsupport๎ƒŠrails๎ƒŠmatch๎ƒŠthe๎ƒŠshape๎ƒŠof๎ƒŠthe๎ƒŠC-Ring๎ƒŠ
tabs๎ƒŠfor๎ƒŠeasy๎ƒŠmaneuvering๎ƒŠand๎ƒŠlocation๎ƒŠwhen๎ƒŠworking๎ƒŠโ€œblindlyโ€๎ƒŠabove๎ƒŠ
the deck
A๎ƒŠuniquely๎ƒŠdesigned๎ƒŠโ€œeasy๎ƒŠaccessโ€๎ƒŠinput๎ƒŠpanel๎ƒŠon๎ƒŠthe๎ƒŠside๎ƒŠof๎ƒŠthe๎ƒŠ
๎ƒŠenclosure๎ƒŠallows๎ƒŠfor๎ƒŠโ€œthroughโ€๎ƒŠconduit๎ƒŠruns๎ƒŠusing๎ƒŠflexible๎ƒŠor๎ƒŠrigid๎ƒŠcon-
duit. Below this cover resides a detachable Phoenix style locking four-
pole connector which provides for easy daisy chain wiring to other full
range๎ƒŠ70.7V๎ƒŠloudspeakers๎ƒŠor๎ƒŠAtlas๎ƒŠSound๎ƒŠFAPSUB๎ƒŠsubwoofer.๎ƒŠThe๎ƒŠpack-
age includes an attractive press-fit grille which nicely matches contempo-
rary architecture.
For new construction drywall ceiling applications, the optional FAP42-TR
trim ring is available. This unit provides a marked location for drywall
installers to cut around essentially reserving the desired location in the
ceiling๎ƒŠuntil๎ƒŠfinal๎ƒŠinstallation๎ƒŠof๎ƒŠFAP42T-UL2043.๎ƒŠMounting๎ƒŠholes๎ƒŠare๎ƒŠ
provided to accommodate 16" or 24" OC stud / joist mounting.
A๎ƒŠsupport๎ƒŠring๎ƒŠis๎ƒŠalso๎ƒŠprovided๎ƒŠon๎ƒŠthe๎ƒŠtop๎ƒŠof๎ƒŠthe๎ƒŠFAP42T-UL2043๎ƒŠ
enclosure to facilitate an auxiliary support cable.
NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT
BE UTILIZED IN DROP CEILINGS FOR SAFETY AND SEISMIC
CONSIDERATIONS.
Architect & Engineer Speci๏ฌcations
System shall include a high performance 4" coaxial loudspeaker,
ported bass reflex enclosure and press-fit grille for conventional ceiling
installation.
Frequency response for the system shall be 75Hz โ€“ 20kHz (ยฑ7dB).
Sensitivity shall be 88dB average. Loudspeaker shall be comprised of a
4" coaxial cone driver constructed of polypropylene with a butyl rubber
surround. The 19mm tweeter shall be constructed of PEI. Magnet shall
be a minimum of 10oz. (283g) and the voice coil diameter shall be 1"
(25mm).
Transformer shall be a 70.7V / 100V type with 1, 2, 4, 8, and 16 watt
primary taps (@70.7V) with a front mounted tap selector switch to include
a transformer bypass setting for 8 / direct coupled operation.ฮฉ
Enclosure shall be a deep drawn steel enclosure design. Internal volume
shall be 285 in3. To facilitate connection in conduit systems, enclosure
shall be equipped with an access panel covering a recessed terminal
cup. This cover shall provide a combination 3โ„ " (19mm inside diameter) 4
/ 1" (25mm inside diameter) knock-out on the side access and a top
access compression fitting / strain relief to facilitate flexible conduit up to
22mm outside diameter or 1" (25mm inside diameter) conduit when the
compression fitting is removed.
External wiring shall be accomplished via a removable lockable wiring
connector with screw-down terminals to provide both secure wire
termination and pre-wiring capability before loudspeaker installation. The
4-pole locking connector shall facilitate in / out connections and shall be
located in the recessed area behind the conduit access panel.
Seismic support eye shall be provided on top of enclosure for additional
suspension point when used in drop tile ceilings. Construction of
enclosure shall be a minimum of 18-gauge, deep drawn galvanized metal.
The system shall include a support backing plate to reinforce the
๎ƒŠceiling๎ƒŠmaterial๎ƒŠand๎ƒŠtile๎ƒŠsupport๎ƒŠrails๎ƒŠfor๎ƒŠuse๎ƒŠon๎ƒŠeither๎ƒŠ2'๎ƒŠx๎ƒŠ4'๎ƒŠ(609mm๎ƒŠ
x๎ƒŠ1219mm)๎ƒŠor๎ƒŠ2'๎ƒŠx๎ƒŠ2'๎ƒŠ(609mm๎ƒŠx๎ƒŠ609mm)๎ƒŠsuspended๎ƒŠceiling๎ƒŠtiles.๎ƒŠThis๎ƒŠ
assembly can all be installed from beneath the ceiling tile.
Overall front face diameter shall not exceed 10
1โ„ " (267mm); overall depth 2
from the bottom of the ceiling shall not exceed 87โ„ " (225mm). Grilles shall 8
be press-fit, manufactured from 24-gauge perforated steel mesh and
finished in white epoxy. Round grille shall be 87
โ„ " (214mm) diameter.16
The๎ƒŠloudspeaker๎ƒŠshall๎ƒŠbe๎ƒŠthe๎ƒŠAtlas๎ƒŠSound๎ƒŠFAP42T-UL2043.
C-Ring / V-Rails
FAP42-TR
AtlasSound.com 3/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
ยฉ2009 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS003677 RevA 9/09
Frequency (Hz)
SPL in dB
FAP42T-UL2043 Directivity vs Frequency
Frequency (Hz)
SPL in dB
FAP42T-UL2043 1/2 Space Frequency Response


Product specificaties

Merk: Atlas Sound
Categorie: Speaker
Model: FAP42T-UL2043

Heb je hulp nodig?

Als je hulp nodig hebt met Atlas Sound FAP42T-UL2043 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Atlas Sound

Handleiding Speaker

Nieuwste handleidingen voor Speaker