Atlas Sound AP-15TC Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Atlas Sound AP-15TC (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL2-1363
113
TWO
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 FAX (800) 765-3435/
TECHNICAL SPECIFICATIONS
Models: AP-15, AP-15T(C)
Power Rating: 15 Watts continuous
Frequency Response: 400 - 14,000 Hz (Nominal)
500 Hz - 6,000 Hz (± 5dB)
Sensitivity: 120dB at 15 watts (peak)
116dB at 15 Watts /1 Meter (avg) 500-6000 Hz
106dB 1 Watt/1Meter (avg) 500-6000 Hz
Dispersion Angle: 70° (-6dB, 2000 Hz octave band)
Weight: AP-15 = 3.5 lbs (1.6kgs)
AP-15T = 4 lbs. (1.8kgs)
Finish: Baked epoxy in grey.
Model AP-15TC is beige epoxy.
Dimensions: 778" W x 834" H x 9516" D
OMNI-PURPOSE®15 WATT
HORN LOUDSPEAKERS
AP-15
AP-15T(C)
AP-15 Series
FEATURES
Superior Intelligibility for Voice and Tone Signaling
High-Efficiency Driver with Proven Performance Reliability
Transformer (T) Equipped Version for Versatile 25, 70.7, or 100V
Line Applications
Omni-Purpose®Bracket for Precise Positioning
Environment Resistant for Outdoor and Indoor Use
U.S. Trademark Design is World Recognized for Quality and
Dependability
• Available in Grey or Beige (C) Finish
APPLICATIONS
AP-15 and AP-15T environment-resistant loudspeakers are the world
standard for high-intelligibility voice and signal transmission in medi-
um-power indoor and outdoor public address, intercom, security and
industrial-signal-system applications. Cost effective, 15-watt units
incorporate high-efficiency compression drivers to project sound over
long distances or wide areas with fewer loudspeakers. The AP-15
Series is recognized throughout the world as "the performance stan-
dard" for commercial sound, intercom and protective-signaling sys-
tems. Units are commonly installed in commercial buildings, distribu-
tion centers, factories, schools, public access areas, civic centers and
recreational facilities.
GENERAL DESCRIPTION
The 8-ohm Model AP-15 and the transformer-equipped Model AP-15T
are double re-entrant loudspeakers which deliver 15-watts of continu-
ous power handling, superior intelligibility and unparalleled efficiency.
The AP-15 Series operates within a nominal frequency response
range of 400-14,000 Hz and offers a sensitivity of 120dB at rated
power to provide clear voice and signal communication.
Transformer-equipped Model AP-15T includes a versatile, 3-way, 25,
70.7, 100V line transformer to meet a variety of distributed system
needs. The transformer is adjustable using Atlas Sound's exclusive
Vari-Tap®Connect Center which features a 7-position,
watts/impedance selection switch. The labor-saving Vari-Tap
®switch
is screwdriver adjustable and includes a protective cover with built-in
cable strain relief.
The trademarked squared-bell design signifies Atlas Sound quality
and reliability. The Omni-Purposmounting bracket (supplied on all
models) achieves precise positioning in the vertical and horizontal
planes with a single adjustment and includes provisions for loud-
speaker installation on conventional surfaces as well as for strap-
mounting on I-beams or pillars. AP Series loudspeakers are U.S.
made to assure superior service reliability. Weather-resistant con-
struction is metal and matching ABS plastic with metal components
finished in grey epoxy (standard) or beige epoxy (Model AP-15TC).
The AP-15 Series also includes a 45-ohm Model AP-15-45 and a 4-
ohm AP-15-4 which are designed respectively for intercom and
CB/auxiliary radio applications. (See SL2-1567).
ARCHITECT AND ENGINEER SPECIFICATIONS
Loudspeakers shall be Atlas Sound Model __________ (AP-15, AP-15C, AP-
15T, AP-15TC) or approved equal. Each loudspeaker unit shall be supplied
with integral compression driver and shall be constructed of structural alumi-
num and ABS plastic with double re-entrant acoustic path and exponentially-
flared square bell. The weather-resistant unit shall have a continuous audio
power rating of 15 watts. Frequency response range shall be 400-14,000 Hz
(Nominal), 500-6000 Hz (+5dB). Sound pressure level shall be 116dB
(15W/1M), 106dB (1W/1M). Sound dispersion shall be 70 degrees (-6dB,
2000 Hz octave band). Mounting bracket shall allow vertical and horizontal
adjustment and include provisions for surface mounting, banding or strap-
ping. Loudspeaker shall have impedance selection, via seven-position switch
of 5000, 2500, 1300, 666, 333, 89 and 45 ohms. Power taps shall be avail-
able at .48, .94, 1.8, 7.5, 15 watts for 25V line, 1, 2, 3.8, 7.5, 15 watts for
70.7V line and 2, 4, 8 and 15 watts for 100V line. Wiring terminals shall be
enclosed for security and weather protection. Finish shall be grey or beige (C)
baked epoxy as indicated. Dimensions shall be 7
78" W x 834" H x 9516" D.
ACCESSORIES
BX-2A Vandal Resistant Cover Plate for Armored Cable and Conduit Connection. Constructed of Cast Aluminum.
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL2-1363
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 FAX (800) 765-3435/
AP-15(T) Frequency Response
AP-15 (Impedance Sweep)
AP-15(T) (Harmonic Distortion - 1.5 watts @ 1 meter)
Polars Are Normalized To Zero On Axis
Atlas Sound products are designed and tested in our well-equipped research laboratory which contains a fully anechoic chamber, complete
analog Bruel & Kjaer measurement equipment and Techron
®TEF 20®audio analyzer. Atlas Sound is proud to be a beta site for TEF software.
TYPICAL CAPACITOR VALUES
8 Ohm Driver 25 Volt Line 70 Volt Line 100 Volt Line
70 mfd 15 mfd 2 mfd 1 mfd
Fundamental
2nd Harmonic
3rd Harmonic
15 watts
@1 meter
1 watt @ 1 meter
Mounting Flange
MAGNITUDE (dB)
Frequency (Hz)
MAGNITUDE (dB)
Frequency (Hz)
Impedance Amplitude
OHMS
Frequency (Hz)
DRIVER PROTECTION: The horn loudspeaker should not be operated at
frequencies outside the specified range, especially below horn cut-off. It is sug-
gested that any program material be high-passed at 300 Hz with a 6dB per
octave filter. This can be done by a low level filter at the amplifier input or by a
series capacitor at each loudspeaker. Electrolytic capacitors can be used but
they must be non-polarized.
(See Typical Capacitor Values Chart.)
932" Dia.
3 Holes 12
APART, ON 2.312
BOLT CIRCLE
134"
2"
12" BANDING SLOT
27
8" DIA.
APR-15T Vari-Tap®Control Connect Center Xfmr. Power Taps
Switch Impedance Watts Watts Watts
Position (Ohms) @ 25V @ 70.7V @100V
1 5,000 1 2
2 2,500 2 47
3 1,300 .48 3.8 7.7
4 666 .94 7.5 15
5 333 1.8 15 X*
6 89 7.5 X* X*
7 45 15 X* X*
*Do not use
Frequency Q Di Beamwidth
(Hz) (Degrees)
1000 5.15 7.12 115
2000 13.90 11.43 70
4000 32.20 15.08 40
8000 39.90 16.01 30


Product specificaties

Merk: Atlas Sound
Categorie: Speaker
Model: AP-15TC

Heb je hulp nodig?

Als je hulp nodig hebt met Atlas Sound AP-15TC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Atlas Sound

Handleiding Speaker

Nieuwste handleidingen voor Speaker