Atlantic LCR2 Handleiding

Atlantic Speaker LCR2

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlantic LCR2 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

LCR2

Compact High Performance Loudspeaker

Specications for the L

Specications for the LSpecications for the LC

CCR2

R2R2

Type Sealed-box, 2-way

Drivers: Woofers (1) 31/2˝ CPP

Tweeter (1) 3/4˝ silk dome tweeter

Frequency Response 115Hz - 20kHz (± 3dB)

Nominal Impedance 6 ohms

Crossover Frequency 3.5kHz

Sensitivity 87dB

Recommended Amplier Power 10-125 Watts

Dimensions 43/4˝ x 8˝ x 5˝ (120mm x 204mm x 127mm) w/grille

Weight (each, unpacked) 3.22 lbs; 1.4kg

Specications are those in eﬀect at the time of printing. Atlantic Technology reserves the right to change specications or

appearance at any time without notice.

Dolby Digital, AC-3, 5.1, Dolby Stereo and Dolby Pro Logic are trademarks of Dolby Laboratories Licensing Corporation.

DTS is a registered trademark of DTS Inc.

343 Vanderbilt Avenue Norwood, MA 02062

(781) 762-6300

www.atlantictechnology.com

LCR2

Compact High Performance

Loudspeaker

Thank you for choosing Atlantic Technology home

theater products. Your new speaker system is precision

craed to give you years of enjoyable, trouble free serv-

ice. is manual covers the Atlantic Technology LCR2.

e LCR2 is a versatile loudspeaker that can be used in

any position in a home theater such as a le or right

channel or a center channel or even a surround channel.

Each LCR2 consists of a low resonance MDF cabinet,

3.5˝ CPP driver, 3/4˝ silk dome tweeter and high quality

crossover components. e LCR2 is designed for use

with all surround formats such as Dolby Digital, DTS or

Dolby Atmos.

PPositioning the L

ositioning the L

ositioning the Lositioning the LCR2 as a F

CR2 as a F

CR2 as a FCR2 as a Front,

ront,

ront,ront,

CeCenter or Surround Ch

nter or Surround Ch

nter or Surround Chnter or Surround Channel

annel

annelannel Speake

Speake

Speake Speaker

We recommend placing the LCR2 with the tweeters

facing upward. Set the receiver bass management or

speaker size to “small” and the crossover to 100Hz.

Alternatively, if you have limited room you can use the

LCR2 horizontal positioned just like a center channel.

We have included four 4mm rubber feet in each accessory

bag to mount to the bottom of the cabinet depending on

how you choose to place the speaker.

Con

ConConnec

nec

necnecting

ting

ting ting Y

YYour Sy

our Sy

our Syour System

stem

stemstem

We recommend that you connect your LCR2 speaker

systems with high quality dual conductor stranded wire

of 18 gauge or larger, for lengths up to 25 feet. Use 16

gauge dual conductor or larger for longer runs of wire.

Contact your local audio/video specialist for specic

cable recommendations and further information for

special circumstances.

Warning: To prevent risk of electrical shock or damage

to your equipment, always switch oﬀ the amplier or

receiver when making connections to the speaker.

You can connect your LCR2 speakers by using a variety

of audio connectors, or you can:

Strip about 1/2˝ (13mm) of insulation from the connect-

ing wires. Connect them to the appropriate push termi-

nal, being careful to observe polarity (positive to the red

terminal, negative to the black terminal).

Whether you are connecting a complete LCR2 system,

or adding a single speaker component to your present

system, the wiring should look like the diagram in Fig-

ure 2.

Figure 2: Typical wiring diagram for speakers in a home theater.

Figure 1: Gold plated spring posts. Accepts up to 14 gauge bare wire.

Warning: Before turning on the amplier, be certain that no

stray wire strands are touching across the two terminals as this

might damage your amplier.

Finally, check the polarity of your front speakers by listening to some music.

If the sound seems hollow, unusually spread out, or has weak bass, recheck

your connections for proper polarity. If necessary, reverse any out of phase

connections. Only one speaker wired out of phase is usually the culprit.

Pla

PlaPlace

cecemen

men

menment a

t a

t at and

ndnd

OpOpe

eeratio

ratio

ratioration

Speaker/room interactions have a huge impact on the sound of the system.

Moving the speakers just a little bit can make a dramatic diﬀerence in what you

hear. e ultra-compact design of LCR2 provides you with maximum placement

exibility while creating a large, seamless, acoustically accurate soundeld for your

home theater or music system. e best placement of the speakers will vary from

room to room. Use the following placement guidelines and Figure 3 as a starting

point. But also feel free to experiment. In fact, it may be benecial to hook up the

speakers with some extra wire and to simply drape the wire across the oor before

installing the speakers permanently. is will allow you the opportunity to move

the speakers around easily so you can nd the best sonic and visual locations.

Typical arrangement for speakers in a home theater. For best results, place the sur-

round speakers within the shaded area. Note that the surround speakers are marked

Le and Right. It is important that the speakers be placed correctly for proper imaging.

MMoun

oun

ounountin

tin

tinting

e LCR2 speakers can be mounted

in a variety of ways:

On speaker stands:

On speaker stands:On speaker stands:

We recommend speaker stands with

an approximate height of 29˝ above

the oor. Ideally the tweeter of the

speaker should be at ear level when

seated.

On the wall:

On the wall:On the wall:

To mount your speakers on a wall,

we have installed metal key-hole

brackets on the back of the LCR2

speakers. Be sure to use a strong

screw whose head and sha will t

within the keyhole opening and

slot. Also be sure to drive the screw well into a stud or use a mounting device (such

as a molly-bolt) that is capable of holding the weight of the speaker. Never simply

drive a nail or screw into a sheet rock or other wall materials. Always follow the

above guidelines for safe speaker mounting.

On a bookshelf

On a bookshelfOn a bookshelf:

Adhesive rubber feet are included.

Liste

ListeListening Levels

ning Levels

ning Levelsning Levels and

and

and and P

PPower

ower

ower ower

Handli

HandliHandling

ng ng – IMP

– IMP

– IMP– IMPORT

ORT

ORTORTA

AANT!

NT!

NT!NT!

e power recommendation for these speaker

components assumes that you will not operate

your amplier/receiver in a way that produces

distortion. Even rugged speakers like LCR2 can

be damaged by a moderately powered system

driven beyond its intended capacity. e harsh

amplier clipping that occurs in this situation will

cause damage to the speaker system. is type of

damage is easily identiable through examination

of the damaged speaker’s voice coil and is not cov-

ered by the warranty. e LCR2 will play very

loudly when provided with enough clean power

to do so. Again, consult your dealer or Atlantic

Technology for additional information.

Car

CarCare and F

e and F

e and Fe and Fe

eeeding

eding

eding eding of

of of Y

YYour S

our S

our Sour Speakers

peakers

peakerspeakers

Clean your speaker cabinets using a so cloth

moistened with a mild, non-abrasive glass cleaner

being careful not to wet the edges of the cabinet.

Also, be careful not to get any cleaning uids on

the driver cones or domes. It may be best to

dampen the cloth with the cleaner and then wipe

the speakers. Use a so cloth, but do not use any

paper products, because no matter how so they

may feel, they will scratch the nish. Aer care-

fully removing the grilles from the speakers, clean

them with a quick pass from a vacuum cleaner

with a brush attachment. is should remove any

dust accumulation. Avoid placing your speakers

in direct sunlight or near a source of heat that

may, over time, damage the nish.

Impor

ImporImportant:

tant:

tant: tant: Sa

SaSav

vve

YYour Bo

our Bo

our Boour Boxes!

xes!

xes!xes!

If possible, save the cartons, packing pieces,

and plastic bags that came with your speak-

ers. ey will be useful in case you move or

have to ship your loudspeakers for any rea-

son. In any case, save all packing materials

until you are certain that the systems have

suﬀered no damage in shipment. If you nd

such damage, either visible or internal, con-

tact your dealer immediately for the proper

return procedure.

Figure 3

Product specificaties

Merk:	Atlantic
Categorie:	Speaker
Model:	LCR2

Heb je hulp nodig?

Als je hulp nodig hebt met Atlantic LCR2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Atlantic

Atlantic H-PAS AT-2 Handleiding

12 Mei 2023

Atlantic TLC-8.3 Handleiding

7 Mei 2023

Atlantic LCR3 Handleiding

4 Mei 2023

Atlantic 2400 Handleiding

15 April 2023

Atlantic TLC-8.2 Handleiding

29 Maart 2023

Atlantic FS-7.1 Handleiding

24 Maart 2023

Atlantic IWTS-10 LCR Handleiding

22 Maart 2023

Atlantic FS3 Handleiding

19 Maart 2023

Atlantic 4400 THX Select Handleiding

25 Februari 2023

Atlantic H-PAS PowerBar 235 Handleiding

8 Februari 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Kramer Tavor 8-Sub Handleiding

21 November 2024

Kramer Galil 6-AW Handleiding

21 November 2024

Extron SM 28 Handleiding

21 November 2024

JBL RM10 Handleiding

20 November 2024

JBL Performance IS6 Handleiding

20 November 2024

JBL Power P-Kit Handleiding

20 November 2024

JBL Performance P941 Handleiding

20 November 2024

JBL Performance P52OWS Handleiding

20 November 2024

JBL Performance PC600 Handleiding

20 November 2024

JBL Performance IS6DT Handleiding

20 November 2024