ART MX821 Handleiding

ART Niet gecategoriseerd MX821

Lees hieronder de 📖 handleiding in het Nederlandse voor ART MX821 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 253 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
MX821
USER'S MANUAL
1
IMPORTANT SAFETY INSTRUCTIONS - READ FIRST
This symbol, wherever it appears, This symbol, wherever it appears, alerts you
alerts you to the presence of uninsulated to important operating and maintenance
dangerous voltages inside the enclosure that instructions in the accompanying literature.
may be sufficient to constitute a risk of shock. Please read the manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here
and on the equipment. Follow the operating instructions printed in this user guide.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Only connect the unit to mains power of the type marked on the rear panel. The power source must provide a good
ground connection.
Power cord:
Use the power cord with sealed mains plug appropriate for your local mains supply as provided with the equipment. If the
provided plug does not t into your outlet consult your service agent. Route the power cord so that it is not likely to be
walked on, stretched or pinched by items placed upon or against.
Grounding:
Do not defeat the grounding and polarization means of the power cord plug. Do not remove or tamper with the ground
connection on the power cord.
Ventilation:
Do not obstruct the ventilation slots or position the unit where the air required for ventilation is impeded. If the unit is to be
operated in a rack, case or other furniture, ensure that it is constructed to allow adequate ventilation.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture or use in damp or wet conditions. Do
not place a container of liquid on it, which may spill into any openings.
Heat:
Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire
hazard. Locate the unit away from any equipment, which produces heat such as: power supplies,
power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and
smoke, especially that associated with smoke machines.
Handling:
To prevent damage to the controls and cosmetics avoid rough handling and excessive vibration.
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit.
To avoid injury to yourself or damage to the equipment take care when lifting, moving or carrying the
unit.
Servicing:
Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, objects fallen
into opening, or the power cord or plug becomes damaged during a lightning storm or if smoke odor or noise is noted.
Refer servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user guide.
2
INTRODUCTION
The MX821 is a versatile rack mount mixer combining eight independent input channels into a single
mono line level mixed output.
Essential features include: XLR microphone and 1/4 inch line level inputs, Level and Tone controls,
and switch-selectable +48 Volt phantom power on each channel. Main output is balanced low
impedance. Additional Pre-Fade output and Aux Buss input jacks allow patching of multiple MX821’s
when more channels are needed.
Built in power supply and single high 19-inch rack mount format allows for easy installation and
reliable long-term operation.
Features
• Eight Independent Input Channels
• Level and Tone Controls on each Channel
• Balanced XLR Microphone and 1/4-inch Unbalanced Line Inputs on each Channel
• Full +48 Volt Phantom Power on XLR inputs with DIP Switch for each Channel
• Balanced TRS 1/4-inch Main Output Jack with Master Level Control
• RCA-type Pre-Fade Output Jack (Not Affected by the Master Level Control)
• RCA-type Aux Buss Input Jack for Channel Expansion
• Solid Single High Rack Mount Chassis w/ Built In Power Supply

Product specificaties

Merk: ART
Categorie: Niet gecategoriseerd
Model: MX821

Heb je hulp nodig?

Als je hulp nodig hebt met ART MX821 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd ART

ART

ART 311 Handleiding

7 December 2024
ART

ART Dual Tube EQ Handleiding

4 Maart 2024
ART

ART The Xtreme Plus Handleiding

4 Maart 2024
ART

ART PD-3 Handleiding

4 Maart 2024
ART

ART Tube EQ Handleiding

4 Maart 2024
ART

ART USB Dual Tube Pre Handleiding

4 Maart 2024
ART

ART Transit System Handleiding

4 Maart 2024
ART

ART DRX-2100 SE Handleiding

4 Maart 2024
ART

ART FXR Elite II Handleiding

4 Maart 2024
ART

ART HD-215 Handleiding

4 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Inglesina

Inglesina Front Handleiding

22 December 2024
Inglesina

Inglesina Newborn Winter Muff Handleiding

22 December 2024
Inglesina

Inglesina Stroller Winter Muff Handleiding

22 December 2024
Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024