Ariston AQXXF 129 Handleiding

Ariston Wasmachine AQXXF 129

Lees hieronder de 📖 handleiding in het Nederlandse voor Ariston AQXXF 129 (60 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/60

WASHING MACHINE

English,1

AQXXF 129 H

Instruction booklet

Contents

Installation, 2-3

Unpacking and levelling

Connecting the cold water and electricity supplies

Technical data

Description of the machine, 4-5

Control panel

Running a wash cycle, 6

Programmes and options, 7

Table of Programmes

Wash options

Detergents and laundry, 8

Detergent

Preparing the laundry

Washing advice

Load-balancing system

Precautions and tips, 9

General safety

Disposal

Opening the door manually

Care and maintenance, 10

Turning off the water and electricity supplies

Cleaning the machine

Cleaning the detergent dispenser

Drum maintenance

Cleaning the pump

Checking the water inlet hose

Troubleshooting, 11

Assistance, 12

Français,13

Espanol,25

Português,37

Nederlands,49

Installation

 Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given away

or moved, please ensure the manual remains with the

machine so that the new owner may benefit from the

advice contained within it.

 Please read this instruction manual carefully it

contains important information regarding the safe

installation, use and maintenance of the appliance.

 You will find the guarantee and other details relating to

the installation process in the bag containing this booklet.

Unpacking and levelling

Unpacking

1. Once the washing machine has been removed

from the packaging, check that it has not been

damaged during transportation.

If it has been damaged, contact the retailer and do

not proceed any further with the installation process.

2. Remove the 4 transit

bolts used during

transportation and the

corresponding spacers

on the back of the

machine (see figure).

3. Having removed the 4 bolts use the 4 plastic

blanking plates to cover the 4 holes.

4. Keep all the pieces; if the washing machine is

transported in future, the transit bolts and spacers will

have to be replaced in order to avoid damaging the

inside of the machine.

Unlocking the chest

To remove the bracket that locks the chest in place and

supports the tub during transportation, remove the

"central" screws, then hold it firmly as you push it

backwards and take it out; loosen the 4 "side" screws

and remove the metal strip.

After you have completed this process fit the plastic toe-

kick supplied (in the "chest"), making sure that the

hooks have been positioned in the holes provided before

pushing it towards the machine.

For more detailed information please refer to the

guidelines provided inside the "chest".

 Packaging materials should not be used as toys by

children.

Levelling

1. Position the washing machine on a level and sturdy

floor, without resting it against walls or cabinets.

2. If the floor is uneven,

the feet of the appliance

may be adjusted until it

reaches a perfectly

horizontal position (the

angle of inclination must

not exceed 2 degrees).

 If the appliance is levelled correctly it will be more

stable and much less likely to cause vibrations and

noise during the spin cycle.

 If positioned on a fitted carpet or a rug, adjust the

feet in such a way as to allow room for air to circulate

and provide ventilation beneath the washing machine.

Connecting the cold water and

electricity supplies

Connecting the water inlet hose

Before connecting the inlet hose to the cold water supply,

allow the water to flow from the tap until it runs clear.

1. Connect the inlet hose

to the machine, by

screwing it into the cold

water inlet on the upper

right hand side of the

back of the machine (see

figure).

2. Place the seal A

(provided in the bag) on

the end of the inlet hose

and screw it to a cold

water tap with a 3/4 BSP

threaded connection (see

figure).

3. Make sure there are no kinks or bends in the inlet hose.

 The water pressure at the tap must fall within the values

indicated in the Technical data table (see next page).

Technical data

Model AQXXF 129 H

Dimensions

width 59.5 cm

height 105 cm

depth 64.5 cm

Capacity from 1 to 7.5 kg

Electrical

connections

voltage 220-240 V 50 Hz

maximum absorbed power 2100 W

Water connections

maximum pressure 1 MPa (10 bar)

minimum pressure 0.05 MPa (0.5 bar)

drum capacity 62 litres

Spin speed up to 1200 rotations per minute

Energy rated

programmes

according to

regulation IEC456

WHITE COTTON programme;

temperature 60°C;

using a load of 7.5 kg.

This appliance conforms to the

following EC Directives:

- 72/23/EEC dated 19/02/73 (Low

Voltage) and subsequent modifications

- 89/336/EEC dated 03/05/89

(Electromagnetic Compatibility) and

subsequent modifications

- 2002/96/EC

65 - 100 cm

 If the water inlet hose is not long enough, contact a

specialist store or an authorised technician.

 Always use the new water inlet hoses supplied with

the machine.

Drainage Connection

Connect the outlet hose

to a draining duct or a

stand pipe at a height

between 65 and 100 cm

from the floor. Do not

bend it under any

circumstances.

Alternatively, place the

end of the hose over the

edge of a washbasin or

tub, fastening the hose

supplied to the tap (see

figure).

The free end of the hose

should not remain

immersed in water.

 We advise against the use of hose extensions; if

absolutely necessary, the length of the extension

must not exceed 150 cm and its diameter must be

the same as the original hose.

Electrical connection

Before inserting the plug into the electrical socket,

make sure that:

 the socket is earthed and complies with current

regulations;

 the socket can withstand the maximum load of the

appliance, which is indicated in the Technical data

table (see opposite);

 the power supply voltage falls within the values

indicated in the Technical data table (see opposite);

 the socket is compatible with the plug of the

appliance. If this is not the case, either the socket

or the plug must be replaced.

 The machine must not be installed outdoors, even in

covered areas. It is extremely dangerous to leave the

appliance exposed to rain, storms and other weather

conditions.

 Once the machine has been installed, the electricity

socket should be easily accessible.

 Do not use extension cables or multiple sockets.

 The cable should not be bent or compressed.

 The cable should be replaced only by authorised

technicians.

Warning! The company shall not be held responsible

for any incidents that occur if these regulations are

not observed.

Product specificaties

Merk:	Ariston
Categorie:	Wasmachine
Model:	AQXXF 129

Heb je hulp nodig?

Als je hulp nodig hebt met Ariston AQXXF 129 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Wasmachine Ariston

Ariston AD12 Handleiding

18 September 2022

Ariston ARXXL105 Handleiding

18 September 2022

Ariston AVL88 Handleiding

18 September 2022

Ariston AMD145 Handleiding

18 September 2022

Ariston ALD10 Handleiding

18 September 2022

Ariston AQXXF 129 Handleiding

18 September 2022

Ariston AIB14 Handleiding

18 September 2022

Ariston AT50 Handleiding

18 September 2022

Ariston AVSF109 Handleiding

18 September 2022

Ariston AVTL129 Handleiding

18 September 2022

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Midea MA200W140D Handleiding

11 December 2024

Asko w 6863 Handleiding

5 December 2024

Asko w 6362lw Handleiding

5 December 2024

Haier HW80-BP14929A Handleiding

10 December 2024

Haier HW90-B14979YU1 Handleiding

10 December 2024

Haier HW100-BP14929A Handleiding

10 December 2024

Haier HWD100-BD14397U1 Handleiding

10 December 2024

Haier HW110-B14IGIEU1 Handleiding

10 December 2024

Haier 31019823 Handleiding

10 December 2024

Haier RTXSG48TMCE-37 Handleiding

10 December 2024