Argon SUB840 Handleiding

Argon Luidspreker SUB840

Lees hieronder de 📖 handleiding in het Nederlandse voor Argon SUB840 (7 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/7

w w w . a r g o n a u d i o . c o m 1

SUB840

02 OWNER’S MANUAL

05 ILLUSTRATIONS

07 SPECIFICATIONS

07 TROUBLESHOOT

w w w . a r g o n a u d i o . c o m 2

SUB840

Owner ’s manual

Dear Customer,

Quality has always been our driving force and founding

Argon Audio is a natural extension of this philosophy.

We have 20 years’ experience in creating and specifying

high quality products, manufacturing them and selling them

on to end users with Value-for-Money as the primary aim.

And Argon Audio is a brand fully compliant with these

values.

Design, features and quality standards are all speciﬁed in

Denmark and manufacturing takes place in the Far East,

where quality vendors are highly competitive - and as a

result supply outstanding Value-for-Money products

– to the delight of both ourselves and our customers!

Introduction

Thank you for choosing Argon Audio Subwoofer, we hope it

will bring you many years of enjoyment.

Please read this manual fully before unpacking and

installing the product.

Argon SUB840 is manufactures with a no-nonsense

approach. 840A is without any unnecessary gimmicks, bling

bling or fancy features. The money is spent on quality

components, eﬃcient woofer driver and extremely solid

cabinet. Quality features you only see on products twice the

price of an Argon SUB840.

Unpacking

We have during production and packing carefully checked

and inspected this Subwoofer.

After unpacking please check for any damage from

transport.

We recommend that you keep the original carton box and

packing material for any future shipping.

Subwoofer installation

The Subwoofer requires connection to the mains power

supply, so for your safety it is important that you read both

this manual and the ampliﬁer manual before connecting.

Subwoofer positioning

Variations in placement of loudspeakers can produce

dramatic diﬀerences in the way music sounds. No listening

room is the same and therefore we encourage you to spend

some time experimenting with which placements work best

in your listening room. Positioning of Subwoofers is

however less critical compared with full-range loudspeakers

because the low frequencies reproduced by a subwoofer

can be diﬃcult to locate in the room. You can start with our

basic recommendations.

To begin with, if you use the Subwoofer in a surround set-

up, the Subwoofer should ideally be positioned between the

TV and one of your front loudspeakers, as ﬁg. 2 to 4 on

page 6. If you are using the Subwoofer in a stereo set-up

the Subwoofer should ideally be positioned between the two

front stereo speakers, as ﬁg.1on page 6.

You should know that, if the Subwoofer is placed close to a

wall or in a corner, the bass sound will be enhanced.

It’s your choice what you like the most. Another example is

the placement of the Subwoofer in the middle of the stereo

w w w . a r g o n a u d i o . c o m 3

SUB840

speakers or away from the center of the stereo speakers.

This may have an impact on how you perceive the stereo

image, even though its only low frequency sounds that

come from the Subwoofer.

Trust your ears and be willing to experiment freely.

(Almost) everything is possible ☺

Running-in period

We recommend a running-in time of your new SUB840

Subwoofer of approximately 15-20 hours at normal listening

level before you decide on the ﬁnal positioning and control

settings of the Subwoofer. During the running-in time the

drive units will settle in and perform as intended.

Connecting your Subwoofer

We recommend that you read the manual of your Ampliﬁer

or AV-receiver carefully before connecting your Subwoofer.

First switch oﬀ the Ampliﬁer and all equipment before you

connect the Subwoofer.

If your Ampliﬁer/av-reciever has a SUB-OUT or PRE-OUT

function: Connect the Subwoofer input IN (10) as shown on

page 5 and your Ampliﬁers/av-recievers SUB-OUT or PRE-

OUT with a RCA/phono cable.

If your Ampliﬁer does NOT have a SUB-OUT or PRE-OUT

function:

Connect the speaker cables from the Ampliﬁer to the

Subwoofer (8) left/right, +/- as shown on page 5. Then

connect the satellite speakers to the Subwoofer using (7)

left/right, +/- as shown on page 5.

When ﬁnished connect the subwoofer net cable (6) as

shown on page 5 to the mains voltage, and push the

POWER ON/OFF button (4) as shown on page 5 to ON

position, the indicator lamp POWER LED will now glow blue

and the Subwoofer is active and ready to be used.

The Argon SUB840 Subwoofer has a built-in AUTO

STANDBY function and after approximately 10 minutes

without any input signal the subwoofer will automatically

switch oﬀ, and the indicator lamp POWER LED will change

color. When an input signal is detected the subwoofer will

become active and the indicator lamp POWER LED will

glow blue.

Setting volume, frequency and phase

The volume, crossover and phase (controls 1, 2 and 3 on

page 4-5 ) can be adjusted on the rear panel, and we

recommend that you adjust the setting of these controls to

your liking – try with diﬀerent music and ﬁlms. If you want

more detailed information on these control functions, we

invite you to visit our homepage www.argonaudio.com.

Care and cleaning

We don’t recommend use of any solvents or cleaners on

Argon SUB840 cabinet, the cabinet surface usually only

requires dusting or cleaning with a damp soft cloth

(only use cold clean water).

The grille fabric may be cleaned with a normal clothes brush

or vacuumed carefully with the grille detached from the

cabinet. Avoid touching the drive unit, and do not use the

Subwoofer as a coﬀee or drinks table (risk of water being

spilled into the subwoofer).

Disconnect the Subwoofer from the mains supply if taken

out of use for a longer period.

Product specificaties

Merk:	Argon
Categorie:	Luidspreker
Model:	SUB840

Heb je hulp nodig?

Als je hulp nodig hebt met Argon SUB840 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Luidspreker Argon

Argon Octave 4A Handleiding

18 September 2022

Argon Alto 55 Handleiding

18 September 2022

Argon Alto A4 Handleiding

18 September 2022

Argon FORTE A4 Handleiding

18 September 2022

Argon Octave 5 Handleiding

18 September 2022

Argon 6340A Handleiding

18 September 2022

Argon Bass 12 Handleiding

18 September 2022

Argon 6350 Handleiding

18 September 2022

Argon Sub 12 Handleiding

18 September 2022

Argon Octave 4 Handleiding

18 September 2022

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker

JBL AS5 Handleiding

2 November 2024

Envivo ENV-1690 Handleiding

21 December 2023

JBL 4367 Handleiding

25 Oktober 2023

JBL B-8IC Handleiding

25 Oktober 2023

JBL B-6ICDT Handleiding

25 Oktober 2023

Tannoy turnberry he Handleiding

15 Oktober 2023

Omnitronic PAS-212 Handleiding

9 Oktober 2023

KEF c5 Handleiding

8 Oktober 2023

KEF C1 Handleiding

8 Oktober 2023

KEF KIT 160 Handleiding

8 Oktober 2023