Argoclima Rock Handleiding

Argoclima Heater Rock

Lees hieronder de 📖 handleiding in het Nederlandse voor Argoclima Rock (6 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

V 05/13

OPERATING INSTRUCTIONS

Read the instructions carefully before installing and operating the appliance or performing

maintenance operations. Observe all the safety instructions; failure to observe the instructions may

cause accidents and/or damages. Store these instructions for future reference.

CERAMIC FAN HEATER AND AIR PURIFIER

V 05/13

GENERAL SAFETY INFORMATION

 Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire,

electric shock or injury to people.

 Ensure that the mains power complies with the voltage specified on the fan heater ’s data plate (220-240V~/50Hz).

 This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.

 This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental abilities, or

without the necessary experience and knowledge, unless they have been adequately supervised and instructed

concerning use of the appliance by a person responsible for their safety.

 Do not restrict the air inlet and outlet grilles.

 The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.

 Ensure that all objects are at least 1 meter from the front and sides of the appliance.

 Disconnect the mains power when the appliance is not used or for cleaning operations.

 Avoid using the fan heater in dusty environments or in the presence of inflammable vapours (e.g. in workshops or

garages) or paint vapours.

 Do not place anything on the appliance, use the appliance to dry clothing.

 Use the appliance in a well-ventilated area.

 Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may

damage the appliance.

 To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan heater operates.

 Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced

by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.

 Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical

personnel to examine the appliance or perform any electrical or mechanical repairs.

 The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the

appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.

 Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth

rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.

 To disconnect the fan heater, push the switch to OFF and remove the plug from the socket. Pull on the plug only. Avoid

pulling on the cord when disconnecting the fan heater.

 Do not place any objects on the cord and do not bend it.

 It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension

cord to operate multiple appliances.

 Do not immerse the cord, plug or any other element of the appliance in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the fan heater above or near another heat source.

WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING.

The symbol below signals the above warning:

 The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable

material including curtains, drapery, blankets, etc. KEEP THE FAN HEATER AWAY FROM THESE MATERIALS.

 Do not connect the appliance to the mains power before it has been properly assembled and positioned.

 Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far

away from busy areas or where it cannot be accidentally pulled-out.

 Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.

 Do not position the fan heater below a socket outlet.

 Do not operate the appliance outdoors.

WARNING: do not use the fan heater with a controller or any other external device that activates the appliance

automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned.

 Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of the initial heating

up of the internal heating elements, and should not recur later on.

WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING

POWER. WHEN SERVICING OR MOVING THE FAN HEATER, ALWAYS UNPLUG THE POWER CORD.

 A fan heater has hot and arcing or sparkling parts inside. It must not be used in potentially dangerous locations such as

flammable, explosive, chemical-laden or wet atmosphere.

 Do not place the fan heater on soft surfaces, like a bed, where openings may become blocked. Always place the fan

heater on a stable, flat, level surface when operating, to avoid the chance of the fan heater overturning. Locate the

power cord so the fan heater or other objects are not resting on it.

 Always unplug the fan heater when not in use. In order to avoid accidents turn unit off if unattended.

 In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not

attempt to repair it and take it to your local after sales service.

V 05/13

DESCRIPTION OF PARTS

1. Control panel

2. Liquid crystal display

3. Air delivery grille

4. Handle

5. Base

6. Intake grille

7. On/off button

8. UV lamp

9. Ion emission

FRONT VIEW REAR VIEW

HOW TO USE THE FAN HEATER

Position the unit on a flat, stable surface.

Connect the power cord to a suitable electric socket (220-240V~50Hz).

When you move the appliance, use the handle.

On/off button (on the rear, above the intake grille)

Bring the on/off button to the “I” position. When the appliance emits a beep this means that the fan heater is ready for use.

Bring the button to the “0” position to switch off the fan heater.

LED DISPLAY

ECO mode LED:

1000 W reduced power to save

energy

COMFORT mode LED:

maximum heating power

(

2000W

)

Swinging

display

Ionization

display

Remote control

receiver

UV lamp display

Room temperature

timer on setting

Temperature display: room

temperature display/ room

temperature setting

°C

hou

Time

display:

Timer display/setting

Product specificaties

Merk:	Argoclima
Categorie:	Heater
Model:	Rock
Soort bediening:	Knoppen
Kleur van het product:	Zwart, zilver
Aantal vermogenniveau's:	2
Timer:	Ja
Warmtebron:	Electrisch
Gewicht:	3700 g
Breedte:	236 mm
Diepte:	200 mm
Hoogte:	550 mm
Soort:	Ventilator elektrisch verwarmingstoestel
Aan/uitschakelaar:	Ja
Beeldscherm:	LCD
Instelbare thermostaat:	Ja
Ionisator:	Ja
Draaibaar:	Ja
Oververhittingsbeveiliging:	Ja
Op afstand bedienbaar:	Ja
Handvat(en):	Nee
Afstandsbediening inbegrepen:	Ja
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz
Geschikt voor ruimtevolume tot:	60 m³
Timerduur (maximum):	23 uur
Verwarmingsvermogen:	2000 W
Plaatsingsopties:	Vloer
Verwarmingselement type:	Keramisch
Verwarming power (min):	1000 W
Zomer-ventilatie:	Ja