Arcam DiVA CD93 Handleiding

Arcam CD-speler DiVA CD93

Lees hieronder de 📖 handleiding in het Nederlandse voor Arcam DiVA CD93 (8 pagina's) in de categorie CD-speler. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

CD93HANDBOOK

Arcam CD93 Compact Disc player

Lecteur de Disque Compact Arcam CD93

Arcam CD93 Compact Disc-Spieler

English

Français

Deutsch

CD93

English

CD93/92

Safety guidelines

CAUTION: To reduce the risk of electric shock, do not

remove cover (or back). No user serviceable parts

inside. Refer servicing to qualied service personnel.

WARNING: To reduce the risk of re or electric shock,

do not expose this apparatus to rain or moisture.

The lightning ash with an arrowhead symbol within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

‘dangerous voltage’ within the product’s enclosure that may be of

sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric

shock, match the wide blade of the plug to the wide slot

in the socket and insert the plug fully into the socket.

Important safety instructions

This product is designed and manufactured to meet strict

quality and safety standards. However, you should be aware of

the following installation and operation precautions:

1. Take heed of warnings and instructions

You should read all the safety and operating instructions

before operating this appliance. Retain this handbook for future

reference and adhere to all warnings in the handbook or on the

appliance.

2. Water and moisture

The presence of electricity near water can be dangerous.

Do not use the appliance near water – for example next to a

bathtub, washbowl, kitchen sink, in a wet basement or near a

swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not spilled into

the enclosure through any openings. Liquid lled objects such

as vases should not be placed on the equipment.

4. Ventilation

Do not place the equipment on a bed, sofa, rug or similar

soft surface, or in an enclosed bookcase or cabinet, since

ventilation may be impeded. We recommend a minimum

distance of 50mm (2 inches) around the sides and top of the

appliance to provide adequate ventilation.

5. Heat

Locate the appliance away from naked ames or heat

producing equipment such as radiators, stoves or other

appliances (including other ampliers) that produce heat.

6. Climate

The appliance has been designed for use in moderate

climates.

7. Racks and stands

Only use a rack or stand that is recommended for use with

audio equipment. If the equipment is on a portable rack it

should be moved with great care, to avoid overturning the

combination.

8. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft, damp,

lint-free cloth. Do not use paint thinners or other chemical

solvents for cleaning.

We do not advise the use of furniture cleaning sprays or

polishes as they can cause indelible white marks if the unit is

subsequently wiped with a damp cloth.

9. Power sources

Only connect the appliance to a power supply of the type

described in the operating instructions or as marked on the

appliance.

10. Power-cord protection

Power supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against

them, paying particular attention to cords and plugs, and the

point where they exit from the appliance.

11. Grounding

Ensure that the grounding means of the appliance is not

defeated.

12. Power lines

Locate any outdoor antenna/aerial away from power lines.

13. Non-use periods

If the unit has a standby function, a small amount of current will

continue to ow into the equipment in this mode. Unplug the

power cord of the appliance from the outlet if left unused for a

long period of time.

14. Abnormal smell

If an abnormal smell or smoke is detected from the appliance,

turn the power off immediately and unplug the unit from the

wall outlet. Contact your dealer immediately.

15. Servicing

You should not attempt to service the appliance beyond that

described in this handbook. All other servicing should be

referred to qualied service personnel.

16. Damage requiring service

The appliance should be serviced by qualied service personnel

when:

A. the power-supply cord or the plug has been damaged, or

B. objects have fallen, or liquid has spilled into the

appliance, or

C. the appliance has been exposed to rain, or

D. the appliance does not appear to operate normally or

exhibits a marked change in performance, or

E. the appliance has been dropped or the enclosure

damaged.

Safety compliance

This product has been designed to meet the IEC 60065

international electrical safety standard.

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

CD93
2
CD93
3
English
Using this handbook
This handbook has been designed to give you all the 
information you need to install, connect, set up and use the 
Arcam CD93 compact disc player. The CR-314 remote control 
handset supplied with this equipment is also described.
Safety
Safety guidelines are set out on the inside front cover of this 
handbook. 
Many of these items are common sense precautions, but for 
your own safety, and to ensure that you do not damage the 
unit, we strongly recommend that you read them.
Digital to Analogue conversion
The CD93 incorporates the latest audio up-sampling technology 
to convert the 44.1kHz data from the CD up to 192kHz in 
24-bit precision using the Analog Devices AD1896 sample rate 
converter.
The 192kHz audio data is converted into the analogue domain 
using four Wolfson Micro WM8740 24-bit stereo DACs. Left and 
right output channels are made using two stereo DAC chips 
per channel, both operating in dual mono conguration. The 
resulting four mono signals (two for each channel) are summed 
together to help improve dynamic range, linearity and therefore 
distortion.
Due to the higher sample rates, the digital lters roll off less 
aggressively than for standard DACs, and the analogue lters 
have a wider bandwidth resulting in less phase distortion, 
particularly for the higher frequencies.
Contents
Safety guidelines................................................... 2
Important safety instructions...................................2
Safety compliance .................................................2
Using this handbook .............................................. 3
Safety...................................................................3
Digital to Analogue conversion ................................3
Installation ............................................................ 4
Positioning the unit.................................................4
Connecting to other equipment ...............................4
CD93 back panel (part) ..........................................4
Connecting to a power supply.................................4
Using your CD player............................................. 5
CDs with text.........................................................5
Using the remote control ....................................... 6
CR-314 Remote Control..........................................6
Technical specication .......................................... 7
Guarantee............................................................. 8
On-line registration................................................ 8