Apc AP9520TH Handleiding

Apc Niet gecategoriseerd AP9520TH

Lees hieronder de 📖 handleiding in het Nederlandse voor Apc AP9520TH (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Temperature and Humidity Sensor

Installation Sheet

Inventory

Install the sensor

1. Find a suitable location to mount the sensor, such as an area that contains mixed, moving air.

Note: Avoid installing the sensor near an area that could cause an inaccurate

reading, such as near air ducts, windows, exterior walls, or room entrances.

2. Mount the sensor using screws or hook-and-loop

fasteners:

–Using screws:

Mark and drill two holes, 3/32 in (2.38 mm) in

diameter and 1.53 in (38.8 mm) apart.

Temperature and Humidity

Sensor with Display or

Temperature Sensor with Display

(1)

#6 × 3/4-in Phillips

self-tapping screws

(4)

Hook-and-loop

fasteners

(2)

Terminator

(1)

Warning: Before drilling, check

for unexposed wiring behind

the drilling surface.

Temperature and Humidity Sensor Installation2

– Using hook-and-loop fasteners:

Clean the mounting surface so that it is free of

dust, oils, and moisture. Install the sensor using

both hoop-and-loop fasteners. Hold them in place

for five seconds to ensure a firm adhesion.

3. Route a cable from the sensor to the

device that will monitor the sensor.

When using more than one sensor:

Route a cable from one sensor to

the next. Each connection on the

sensor should have either a CAT 5

cable or a terminator (0W04161)

(provided).

Set the A-Link address

Set the DIP switches on each sensor to a unique A-Link address.

See the documentation provided with the monitoring device for A-Link addresses. Each

sensor must be set with a unique A-Link address. Some addresses are reserved for use by the

monitoring device. The addresses for sensors will vary depending on the monitoring device to

which they are connected.

Screen menus

At three-second intervals, the display scrolls through two screens (for AP9520T) or three screens (for

AP9520TH).

1 2 3 4

Temperature and Humidity Sensor Installation 3

Specifications

* In airflow of >100 ft/min.

Electrical

Operating Voltage 24 VDC nominal

Operating Current 10 mA (max)

Temperature Accuracy* ± 1.8° F (1.0°C)

Temperature Drift* ± 0.36°F (0.2° C)/over life of unit

Humidity Accuracy (AP9520TH) * ± 3.0% RH @ 25°C

Humidity Drift (AP9520TH) * ± 1.0% RH/5 years

Physical

Size (H × W × D) 3.9 × 1.7 × 1.1 in

10.0 × 4.35 × 2.75 cm

Weight 2.7 oz (76 g)

Environmental

Elevation

Operating 0 to 10,000 ft (0 to 3000 m)

Storage 0 to 50,000 ft (0 to 15 000 m)

Temperature

Operating –4 to 140°F (–20 to 60°C)

Storage –40 to 176°F (–40 to 80°C)

Approvals

EMC Verification AS/NZS CISPR 22 (C-Tick) Class A,

CE, EN 55022 Class A, EN 55024,

FCC Part 15 Class A, ICES-003,

VCCI

Product specificaties

Merk:	Apc
Categorie:	Niet gecategoriseerd
Model:	AP9520TH
Gewicht:	800 g
Temperatuur bij opslag:	-40 - 65 °C
Compatibele producten:	AS/NZS 3548 (C-Tick) Class A, CE, EN 55022 Class A, EN 55024, FCC Part 15 Class A, ICES-003, VCCI
Hoogte, in bedrijf:	0 - 3000 m
Afmetingen (B x D x H):	43 x 28 x 99 mm
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Code geharmoniseerd systeem (HS):	84733020