Apart COLS41 Handleiding

Apart Speaker COLS41

Lees hieronder de 📖 handleiding in het Nederlandse voor Apart COLS41 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
This manual applies to all types available: COLS41-COLS81- COLS101-COLS141 ( 66 mm wide)
and COLW41-COLW81-COLW101 (100mm wide).
The APart COL series speakers are more than just nice looking columns speakers: COL series
speakers have been designed as highly effective line array speakers, featuring excellent vertically
controlled directivity, wide horizontal directivity, high sensitivity and high power handling. COL
series speakers offer you very clear and natural speech reproduction, while music performs very
pleasing too.
Drastically improved audio directivity results in wider coverage range over longer distance. This
means that they cover a wider area than conventional column speakers, so less speaker-cabinets
are needed for achieving the same sound pressure level in a certain area. Also there will be
reduced problems with microphone feedback that is easily generated in reverberant locations. The
especially developed drivers with extended frequency response and low distortion give much better
speech intelligibility. COLS series acoustic response has been speciî‚¿cally tailored for speech where
COLW series are ideal for speech and music reproduction.
Thanks to their unobtrusive appearance and excellent acoustic directivity, COL series speakers can
be used in highly reverberant spaces, such as churches, houses of worship, railway stations, as
well as conference rooms, recreational areas or sports facilities. The speaker cabinets are made of
a sturdy extruded aluminum, and all material and construction has been adapted to be used for both
indoor as outdoor, so weather proof and even impact proof (f.e. footballs).
Both 100 volt and low impedance (Lo-Z) connections are provided for increased installation exibil-
ity. 100V line with several transformer power taps as well as low impedance connectors are hidden
inside the cabinet. To access the connector, open the cabinet: remove the two philips screws at the
bottom of the enclosure, see picture below. In normal indoor situations you can feed the cable(s)
through the rubber cable sleeves, for IP66 compatibility, use the supplied cable entries and washers
provided in the accessory kit. A second cable entry point is present for easily looping the cable
through.
Mounting these speakers has never been easier. An adjustable stainless steel mounting bracket
with extension is included in the packing. The extension piece can be used to mount the speakers
under an angle. Attach the brackets according to the picture: you can mount the speaker under a
certain angle from the wall by extending the top bracket with the supplied bracket extender.
To obtain the best performance, it is VERY important to position the column correctly, this means
that the center point of the column must be precisely directed towards the height of the listeners (or
just above it) in the appointed area. For advise in acoustics, contact your dealer.
For improved security, a special mounting rail is incorporated at the back of the cabinet. You can
use M6 at head carriage or T-bolts to attach additional safety cables or special mounting brackets
(not included).
Color code internal connector:
Common (for 100 volt use or lo-Z use): Black
Lo-Z connection: White
High power tap: Red
Medium power tap: Yellow
Low power tap: Green
Note: you can only use 1 power tap at the same time: never connect the speaker to a Lo-Z and
100 volt ampliî‚¿er simultaneously and never use multiple 100 volt taps at the same time. Connect
the speaker correctly as required and don’t connect the unused wires. Example: for use as a lo-Z
speaker, connect the black (negative) and white (positive) wire.


Product specificaties

Merk: Apart
Categorie: Speaker
Model: COLS41
Kleur van het product: Wit
Gewicht: 2000 g
Breedte: 66 mm
Diepte: 66 mm
Hoogte: 400 mm
Connectiviteitstechnologie: Bedraad
Type stroombron: AC
Gemiddeld vermogen: 20 W
Equalizer-instellingen: Nee
Impedantie: 8 Ohm
Audio-uitgangskanalen: 1.0 kanalen
Speaker plaatsing: Vloer
Peak Music Power Output (PMPO): 30 W
Frequentiebereik: 250 - 20 Hz
Tweeter: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Apart COLS41 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Apart

Handleiding Speaker

Nieuwste handleidingen voor Speaker