Amaran 100d S Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Amaran 100d S (11 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Product Manual
213pt
100pt
English
amaran 100d S
02
Introduction
Important Safety Instructions
When using this unit, basic safety precautions should always be followed, including the following:
1. Read and understand all instructions before using.
2. Close supervision is necessary when any fixture is used by or near children. Do not leave thexture unat-
tended while in use.
3. Care must be taken as burns can occur from touching hot surfaces.
4. Do not operate the fixture if a cord is damaged, or if the fixture has been dropped or damaged, until it has
been examined by qualied service personnel.
5. Position any power cables such that they will not be tripped over, pulled, or put into contact with hot
surfaces.
6. If an extension cord is necessary, a cord with an amperage rating at least equal to that of the fixture should
be used. Cords rated for less amperage than the fixture may overheat.
7. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing, or when not in
use. Never yank the cord to remove the plug from the outlet.
8. Let the lighting xture cool completely before storing. Unplug the power cable from lighting xture
before storing and store the cable at assigned space of the carrying case.
9. To reduce the risk of electric shock, do not immerse thisxture in water or any other liquids.
10. To reduce the risk of fire or electric shock, do not disassemble this fixture. Contact cs@aputure.com or take
the lightingxture to qualied service personnel when service or repair is required. Incorrect reassembly
may cause electric shock when the lighting fixture is in use.
11. The use of any accessory attachment not recommended by the manufacturer may increase the risk of fire,
electric shock, or injury to any persons operating thexture.
12. Please power this fixture by connecting it to a grounded outlet.
13. Please remove the protective cover before use.
14. Please remove the protection cover before using the reflector.
15. Please do not block the ventilation or do not look at the LED light source directly when it is powered on.
Please do not touch the LED light source in any condition.
16. Please do not place the LED lightingxture near any flammable object.
17. Only use a dry microber cloth to clean the product.
18. Please do not use the light xture in wet condition on account of electric shock may be caused.
19. Please have the product checked by an authorized service personnel agent if the product has a problem.
Any malfunctions caused by unauthorized disassembly are not covered by the warranty. The user may
pay for maintenance.
Thank you for purchasing the "amaran" series of RGBWW COB lights - amaran 100d S.
Amaran 100d S is a 100W full color LED light. It has a new and colorful appearance design and supports
full-color output of light sources. Advanced software interaction design, minimalist control method, com-
patible with Sidus Link® APP control. Amaran 100d S will provide you with lightweight and cost-effective
lighting solutions; the newly upgraded exterior color will give you a wonderful visual experience.
1. Please remove the protective cover before use.
2. Please remove the protection cover before using the reflector.
03
SAVE THESE INSTRUCTIONS
FCC Compliance Statement
Changes or modications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try reorient or relocate the
receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a different circuit than the receiver is connected to.
Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement:
This device has been evaluated to meet general RF exposure requirements.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
We recommend only using the original Aputurcable accessories. Please note that any malfunc-
tions caused by using unauthorized accessories are not covered by the warranty. The user may pay
for maintenance.
This product is certified by CE, ROHS, UKCA, FCC, IC, RCM, PSE, KC, inspection report, NCC. Please
operate the product in full compliance with relevant country's standards. Any malfunctions caused
by incorrect use are not covered by warranty. The user may pay for maintenance.
The instructions and information in this manual are based on thorough, controlled company testing
procedures. Further notice will not be given if the design or specifications change.
20.
21.
22.


Product specificaties

Merk: Amaran
Categorie: Verlichting
Model: 100d S

Heb je hulp nodig?

Als je hulp nodig hebt met Amaran 100d S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Amaran

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting