Alto Kick 12 Handleiding

Alto Speaker Kick 12

Lees hieronder de đź“– handleiding in het Nederlandse voor Alto Kick 12 (20 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 158 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
USER GUIDE
ENGLISH
GUĂŤA DEL USUARIO
ESPAĂ‘OL
GUIDE D’UTILISATION
FRANÇAIS
GUIDA PER L'USO
ITALIANO
BENUTZERHANDBUCH
DEUTSCH
GEBRUIKERSHANDLEIDING
NEDERLANDS
2
USER GUIDE (ENGLISH)
BOX CONTENTS
Kick12 amplifier; power cable; User Guide; Safety Instructions & Warranty Information Booklet
FEATURES
• 4-channel mixer with stereo line inputs on each channel and an XLR input on Channel 1
• 400 Watts of peak power, 200 Watts continuous
• 15” low-frequency transducer, 1” compression driver
• Custom-tuned electronic crossover provides superb frequency response
• True bi-amped design provides dedicated power to high and low drivers
• Built-in Alesis digital effects processor with reverb, delay, chorus, and more
• 256 effect presets: 16 effects with 16 variations each
• Integrated folding steel kickstand provides the ideal monitoring angle instantly
• Level, effects, and high & low EQ controls on all four channels
• Stereo RCA input for connecting MP3 players and other audio devices
• Footswitch input allows instant activation or bypass of effects
• 1/4" headphone output with dedicated volume control
• Angled speaker baffle for optimized throw
• Dual XLR and 1/4" Mix outputs
• Ground Lift switch
QUICK SETUP / CONNECTION DIAGRAM
Use the kickstand on the amplifier's rear panel to support the unit
at an ideal monitoring angle. See next page.
*Note: Any items not mentioned under Box Contents are not
included.
Microphone*
Power
Subwoofer*
Synthesizer*
Power
Power
Footswitch*
Loudspeaker* Loudspeaker*
3
KICKSTAND
Use the kickstand on the amplifier's
rear panel to support the unit at an
ideal monitoring angle.
TOP PANEL
10 11 1
423
5
6
7
8
5
6
7
8
5
6
7
8
5
6
7
8 9
1. POWER SWITCH – Turns the amplifier on/off. Make sure the MAIN VOL and
HEADPHONES VOLUME knobs are set to "zero" before turning it on. The LED above this
switch illuminates when the amplifier is on.
2. HEADPHONES OUTPUT – Connect your 1/4" stereo headphones here.
3. HEADPHONES VOLUME – Turn this knob to adjust the level of the HEADPHONE
OUTPUT.
4. MAIN VOL – Turn this knob to adjust the amplifier's main volume.
5. CHANNEL LEVEL – Turn this knob to adjust the level of the corresponding channel.
6. CHANNEL HIGH EQ – Turn this knob to adjust the level of the channel's high frequencies
(treble).
7. CHANNEL LOW EQ – Turn this knob to adjust the level of the channel's low frequencies
(bass).
8. CHANNEL FX – Turn this knob to adjust how much of the currently selected effect is
applied to the channel.
9. EFFECT PRESETS – Turn this knob to select an effect.
10. EFFECT VARIATIONS – Turn this knob to select different variations of the selected effect.
11. FX LEVEL – Turn this knob to adjust how much of the currently selected effect is applied
to the entire mix.


Product specificaties

Merk: Alto
Categorie: Speaker
Model: Kick 12

Heb je hulp nodig?

Als je hulp nodig hebt met Alto Kick 12 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Alto

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Canton

Canton GLE 476 Handleiding

17 November 2024
Berker

Berker 29807009 Handleiding

17 November 2024
Berker

Berker 29807006 Handleiding

17 November 2024
Berker

Berker 30801606 Handleiding

17 November 2024
Berker

Berker 29806086 Handleiding

17 November 2024
Berker

Berker 30809909 Handleiding

17 November 2024
Berker

Berker 29801606 Handleiding

17 November 2024
Berker

Berker 30808989 Handleiding

17 November 2024
Berker

Berker 29807003 Handleiding

17 November 2024
Berker

Berker 30806089 Handleiding

17 November 2024