Akg LC617MD Handleiding

Akg Microfoon LC617MD

Lees hieronder de 📖 handleiding in het Nederlandse voor Akg LC617MD (4 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

QUICK

START

GUIDE

LC 617

Read carefully before use

LC 617 Mounting LC 617 Positioning Adapter Mounting Cleaning

Download cutsheet with technical details

from: www.akg.com

For CE certiﬁcates contact: @akg.com

This product conforms to the standards

listed in the Declaration of Conformity.

01/17/5079105_B

Printed in EU

• To clean the microphone

surface, use a soft cloth

moistened with water.

• Clean the foam

windscreen in mild soap

suds. You can use

the windscreen again as

soon as it has dried.

Trouble Shooting

Problem Possible Reason How to Solve

No Sound:

Europe:

AKG Acoustics GmbH

Laxenburger Strasse 254

A1230 Vienna - AUSTRIA

Tel.: +43-1-86654-0

hotline akg.com@

USA:

AKG Acoustics, U.S.

8500 Balboa Blvd. Dock 15

Northridge, CA 91329, USA

Tel.: +1-818-920-3224

akgusatechsupport@harman.com

necessary.

Distortion:

Also read the transmitter and receiver manuals!

RISK OF DAMAGE

Please make sure that the piece of equipment your microphone will be When scrapping the equipment, separate the case, circuit boards and cables and dispose all

components in accordance with local waste disposal rules.

The packaging of the equipment is recyclable. Dispose packaging in an appropriate containe. r

provided by the local waste collection/ recycling entity and observe all local legislation relating

to waste disposal environment and recycling.

1. Power to mixer and/or

ampliﬁer is off.

2. Channel or master fader

on mixer, or volume

control on ampliﬁer is at

zero.

3. Microphone is not connected

to mixer or ampliﬁer.

4. Cable connectors are

seated loosely.

5. Cable is defective.

6. No supply voltage.

1. Switch power to mixer or

ampliﬁer on.

2. Set channel or master

fader on mixer or volume

control on ampliﬁer

to desired level.

3. Connect microphone to

mixer or ampliﬁer.

4. Check cable connectors

for secure seat.

5. Check cable and

replace if damaged.

6. Switch phantom power on

6a. Check cable and replace if

1. Gain control on the

mixer set too high.

2. Mixer input in overload

1. Turn gain control down CCW.

2. Connect a 10-dB preattenuation

pad between

microphone and mixer

Product specificaties

Merk:	Akg
Categorie:	Microfoon
Model:	LC617MD
Kleur van het product:	Zwart
Diepte:	8.5 mm
Hoogte:	19 mm
Soort:	Contactmicrofoon
Connectiviteitstechnologie:	Bedraad
Gevoeligheid microfoon:	115 dB
Operating voltage:	10 V
Frequentie microfoon:	20 - 20000 Hz
Microphone input impedance:	200 Ohm
RF vermogen:	7 mW
Gewicht microfoon:	5.3 g
Output impedance:	2000 Ohm