Aiwa ABT-500 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Aiwa ABT-500 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
ABT-500
BLUETOOTH LIGHT UP SPE AKER
5
LED Lighting Function
• Press and hold the ‘Light’ Button for 2 seconds to turn on or turn
off the LED lighting.
• Press and release the ‘Light’ Button repeatedly until the desired
lighting mode is selected. There are 7 lighting modes.
Troubleshooting
Problem Solution
Unable to turn on
the speaker
Please make sure the battery is full and the
indicator light is off.
Unable to connect
to the Bluetooth
device
Make sure that the speaker is in Bluetooth
mode, and it is within 10 metres from your
Bluetooth-enabled device.
Ensure that neither the speaker nor the
Bluetooth device is connected to other
Bluetooth devices.
No sound output Try increasing the volume.
If the problem still persists, please contact Customer Service for
further advice.
Technical Specications
Power supply: DC 5V, 1A
Power output: 7W
Bluetooth version: 4.2
Bluetooth operation distance: 10m
Battery capacity: 2500mAh
Playing time: About 3 hours when the LED light is off
About 2 hours when the LED light is on
Battery charging time: About 6 hours
Important Safety Instructions
Warning: To prevent fire or shock hazard, do not expose the unit to
rain or moisture. To avoid electrical s hock, do not dismantle. Refer
all servicing to qualied service personnel.
1. Read these instructions thoroughly and retain for future
reference.
2. When using electrical appliances, basic safety precautions
should always be followed.
3. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
4. This product is not a toy! Children should be supervised to
ensure that they do not play with the appliance.
5. Any repairs must be done by qualied service personnel. There
are no user-serviceable parts inside. Do not attempt to repair by
yourself.
6. Do not expose this speaker to water, corrosive liquids or gases.
Store the speaker in a clean, dry place.
7. Keep the unit free from dust and away from heat sources, direct
sunlight, humidity, water or other liquids.
8. Do not immerse the unit in water or other liquids.
9. Do not place any naked flame sources such as lit candles on or
near the speaker.
10. Clean only with a soft, dry cloth.
11. Do not cover the speaker durin g use.
12. Do not operate the unit if it has been exposed to water, moisture
or any other liquid in order to prevent electric shock, explosion and
/or injury to yourself and damage to the unit.
13. Do not use the unit for anything other than its intended use.
14. Do not play music at excessive volume levels as this can cause
hearing loss or damage the unit.
15. Unplug the adaptor after the unit has been used, before it is
cleaned and whilst being repaired.
Box Contents
1 x Bluetooth Speaker
1 x Instruction Manual (this document)
1 x USB Charging Cable
1 x AUX 3.5mm Audio Cable
14
Battery Charging
• Charge the speaker fully before using it for the first time.
• Use DC 5V 1A power adaptor to charge the unit or connect it to the
USB output port of a computer or similar. The red LED indicator
light flickers during charging.
• When fully charged, the red LED indicator turns off. Remove the
charging cable promptly.
• It takes about 6 hours to fully charge the battery.
Turning the Speaker On/Off
Press and hold thePower’ Button to turn on or turn off the unit.
Bluetooth Connection:
• Place the speaker within 10 metres (max. Bluetooth range) of your
Bluetooth enabled device.
• Press ‘Mode Button to switch to Bluetooth mode.
• Enable Bluetooth function on your Bluetooth enabled smartphone,
tablet or media player; navigate to the Bluetooth setting menu, and
search for new devices. The Bl uetooth name for this speaker is
Aiwa ABT-500. You will hear an audio indicator when pairing is
successful.
• Press and releasePrevious‘ or ‘Next’ Button to play the previous
or next song.
• Press and hold the 'Volume +/-' Buttons to adjust the volume.
FM Radio Playback:
• Connect the DC cable (USB charging cable) to the unit as the FM
antenna.
• Press the ‘Mode’ Button to switch to FM Radio mode.
• Press the ‘Play/Pause’ Button to search for available FM channels
automatically. Once the search i s completed, the speaker will store
the channels automatically.
• To stop automatic search, press the ‘Play /PauseButton again.
• Press the ‘Previousor ‘Next Bu ttons to switch between the
channels.
USB/microSD/AUX Input:
Connect a USB/microSD memory device, or an AUX cable
connected to your device, to the appropriate port. If the speaker
doesn't start playing the selected audio directly, use the ‘Mode
Button to switch to the correct mode.
Note:
• Only mp3 and wma formats are compatible.
• Maximum size of the USB/ microSD device that can be connected
is 32GB.


Product specificaties

Merk: Aiwa
Categorie: Niet gecategoriseerd
Model: ABT-500

Heb je hulp nodig?

Als je hulp nodig hebt met Aiwa ABT-500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Aiwa

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd