Aigis CAM468CH Handleiding

Aigis Bewakingscamera CAM468CH

Lees hieronder de 📖 handleiding in het Nederlandse voor Aigis CAM468CH (8 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
3
Set screw for
back-focus ring
Back-focus ring
1/4-20 Tapped hole
for Mounting Screw
Figure 4
Figure 1
Components & Specifications
Product ID Camera Type Resolution / Imager Input Voltage Max Power
CAM 468CH Color Hi-Res 540TVL, 1/3” CCD 12VDC / 24VAC ± 10%, 60Hz < 3W
CAM 468DN Day/Night 540TVL, 1/3” CCD 12VDC / 24VAC ± 10%, 60Hz < 3.5W
CAM 586WD Wide Dynamic 540TVL, 1/3” DPS 12VDC / 24VAC ± 10%, 60Hz < 4W
Accessories
• C/CS mount adapter
• 1/16” Allen wrench
• 4-pin auto-iris connector jack
(see diagram at right)
General Camera Setup Procedure
1. Remove the unit from its packaging. Remove the
cover cap from the front of the camera.
2. The camera is equipped with a standard CS-mount.
Optional C-Mount adapter included.
3. Screw the lens firmly onto the lens mount.
4. Attach the 4-pin plug connector from the lens into the
4-pin jack in the body of the camera.
a. An unwired 4-pin is included in the hardware kit. Use this connector if the lens wires terminate as
flying leads. Refer to the chart below Figure 1 and the lens installation manual for wiring information.
5. Mount the camera in the desired location using either of the 1/4-20 tapped holes on the top and bottom of the
camera (see Figure 4).
6. Once mounted and oriented as desired, power the unit as follows:
a. If powering the camera with 12VDC, connect the +12v wire (typically red) into the leftmost contact
and -12v wire (typically black) into the middle contact (see Figure 2).
b. If powering the camera with 24VAC, the two power wires are interchangeable. Connect one to the
leftmost contact and one to the center contact (see Figure 3).
7. Once the unit is powered, a red LED will begin glowing below the power connector.
8. The BNC jack on the rear of the camera provides the video output feed. Connect a test monitor (or any
monitor that accepts BNC video input) to this jack to adjust the zoom and focus settings.
Pin Video Iris
Lens
DC Iris
Lens
1 Power Damp -
2 Null Damp +
3 Video Drive +
4 Ground Drive -
Figure
2
Wired for 12 VDC
Red = +12vdc (hot)
Black = -12vdc (ground)
Figure
3
Wired for 24 VAC
Wires are interchangeable
when powering the unit with
24VAC.
Red
wire
Black
wire
Depress the central
button to insert the power

Product specificaties

Merk: Aigis
Categorie: Bewakingscamera
Model: CAM468CH

Heb je hulp nodig?

Als je hulp nodig hebt met Aigis CAM468CH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Aigis

Aigis

Aigis PTZA6-1W30H Handleiding

7 Juli 2023
Aigis

Aigis PTZA6-1R23H Handleiding

6 Juli 2023
Aigis

Aigis D5WD211R-W Handleiding

6 Juli 2023
Aigis

Aigis CAM-HC1CH30-6 Handleiding

5 Juli 2023
Aigis

Aigis PTZA6-1R30H Handleiding

5 Juli 2023
Aigis

Aigis MLA2CH211 Handleiding

5 Juli 2023
Aigis

Aigis D3PDN211 Handleiding

4 Juli 2023
Aigis

Aigis MLA2DN211 Handleiding

4 Juli 2023
Aigis

Aigis CAM468DN-212 Handleiding

3 Juli 2023
Aigis

Aigis D3PWD211 Handleiding

2 Juli 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

QSC

QSC NC-110 Handleiding

21 November 2024
Provision ISR

Provision ISR I3-350IP5SMVF Handleiding

20 November 2024
Provision ISR

Provision ISR I2-350A-28 Handleiding

20 November 2024
Provision ISR

Provision ISR I4-350A-MVF Handleiding

20 November 2024
Canon

Canon PowerShot GOLF Handleiding

20 November 2024
Flir

Flir FH-Series Handleiding

20 November 2024
EtiamPro

EtiamPro CCTVPROM23 Handleiding

17 November 2024
EtiamPro

EtiamPro CCTVPROM20W Handleiding

17 November 2024
Leviton

Leviton 68A02-2 Handleiding

17 November 2024
Reolink

Reolink RLK8-800D4 Handleiding

16 November 2024