Adastra RS605 Handleiding

Adastra Receiver RS605

Lees hieronder de 📖 handleiding in het Nederlandse voor Adastra RS605 (8 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

RS605

5 x 60W Slave Amplifier

Item ref: 151UK 953.

User Manual

Introduction

Thank you for choosing the Adastra RS605 rackmount 5 x 60W slave amplifier as part of your public

address system. This amplifier is designed to offer high quality, dependable service for mobile and

installed systems. Please read this manual fully and follow the instructions to achieve the best results

with your new purchase and to avoid damage through misuse.

953.151UK User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit

This symbol indicates that there are important operating and maintenance instructions in

the literature accompanying this unit.

SAFETY NOTICE

1. Prior to use, read through this manual

2. Keep the manual in good condition

3. Pay attention to safety warnings

4. Observe all operating requirements

5. Do not use the device near water or wet areas

6. For cleaning, only use a lint-free, dry cloth

7. Install according to the specifications

8. Place away from heat sources or heating appliances

9. Use mains lead provided and avoid damage to cable or connectors

10. Unplug power from mains during stormy weather or if unused for long periods

11. In case of malfunction, water ingress or other damage, consult qualified service personnel

12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing

13. Please pay attention to warning symbols during transit and placement

14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel

15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection

16. Ensure correct operation of the mains switch

17. The DC input terminals must only be connected to a DC power supply which complies with SELV

Warning

To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.

If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before

further use. Avoid impact, extreme pressure or heavy vibration to the case

No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –

Safety

 Check for correct mains voltage and condition of IEC lead before connecting to power outlet

 Use double insulated speaker wire with adequate current rating for 100V speaker connections

 Do not use 8Ω and 100V terminals at the same time

 Do not connect 8Ω speakers to the 100V terminal or 100V speakers to the 8Ω terminal

 Do not allow any foreign objects to enter the case or through the ventilation grilles or CD slot

Placement

 For rack-mounting, ensure adequate support for the weight of the amplifier

 Ensure adequate air-flow and do not cover cooling vents at the front and rear of the amplifier

 Ensure adequate access to controls and connections

Cleaning

 Use a soft cloth with a neutral detergent to clean the casing as required

 Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups

 Do not use strong solvents for cleaning the unit

953.151UK User Manual

Front panel

Rear panel

PROTECT LED indicators

CLIP LED indicators

SIGNAL LED indicators

Channel volume controls

Power on/off switch

Mains voltage selector

IEC mains inlet & fuse holder

24Vdc power connection

Mode switch

10.

Speaker output modular connectors

11.

Channel GAIN controls

12.

Line input connectors (RCA)

13.

Ventilation grille - do not cover

Product specificaties

Merk:	Adastra
Categorie:	Receiver
Model:	RS605
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	14000 g
Breedte:	482 mm
Diepte:	420 mm
Hoogte:	89 mm
Gewicht verpakking:	12000 g
Breedte verpakking:	535 mm
Diepte verpakking:	470 mm
Hoogte verpakking:	140 mm
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Audio-ingang (L, R):	5
Gemiddeld vermogen:	300 W
Volumeregeling:	Draaiknop
Ingang stroom:	Ja
Audio-uitgangskanalen:	5.0 kanalen
Frequentiebereik:	100 - 20000 Hz
Signaal/ruis-verhouding:	90 dB
Aantal kanalen:	5 kanalen
Totale harmonische vervorming (THD):	1 procent
AC-ingangsspanning:	110 - 230 V
AC-ingangsfrequentie:	50/60 Hz
Piekvermogen per kanaal:	60 W
Speakers connectiviteit type:	RCA
Line inputs (RCA):	5
Output impedance:	8 Ohm
Gain aanpassing:	Draaiknop