Adastra BH3V Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Adastra BH3V (2 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
BHV SERIES
Background Speakers
User Manual
Introduction
Thank you for choosing the Adastra BHV series speakers for your sound installation.
These durable cabinets deliver reliable, high quality sound output for music and
announcements. Please read the following guidance notes for correct installation.
Contents
BH series background speaker
2 x cross-head screws
Steel speaker bracket
2 x speaker screw caps
Plastic wall plate
Specifications
Model
BH3V
BH4V
BH5V
BH6V
White stock ref.
952.610 UK
952.612 UK
952.614 UK
952.616 UK
Black stock ref.
952.611 UK
952.613 UK
952.615 UK
952.617 UK
Impedance
16℩
IP rating
IP44
Dispersion
120°
100V tappings
2 4 6 8W , , ,
2.5 5 , , , 10 20W
5 , 30W , , 10 20
10, , , 20 30 40W
Power max
60W
60W
100W
140W
Power rms
30W
30W
50W
70W
Freq. response
110Hz - 20kHz
100Hz - 20kHz
80Hz - 20kHz
50Hz - 20kHz
LF driver
75mmØ (3 “)
100mmØ (4“)
135mmØ (5.25")
165mmØ (6.5")
HF driver
13mmØ (0.5“)
13mmØ (0.5“)
13mmØ (0.5“)
25mmØ (1")
Sensitivity
86 dB
88 dB
89 dB
90dB
Dimensions
1 *107*1 64 02mm
195*127*126mm
25 635*1 *1 60mm
2 *1 *190 90 95 mm
Weight
1.06kg
1.64 kg
2.45kg
3.27 kg
BHV Series User Manual
Installation
1. Unscrew the plastic wall plate from the speaker bracket and mark out, drill
and fix to the wall as required.
2. Line up the steel speaker bracket against the plastic wall plate at the
required tilt angle and secure using the 2 screws provided through 2 of the
punched holes.
3. Locate the speaker into the speaker bracket and secure using the screw
caps provided on the top and bottom.
4. Adjust the horizontal angle (pan) of the speaker by loosening the screw caps, turning the speaker and
re-tightening the screw caps.
5. Remove the cover on the rear of each speaker to reveal the
spring terminals.
6. If the amplifier is 100V type, select the required wattage output
on the rotary switch inside the rear speaker compartment.
7. If the amplifier is
not
a 100V type, ensure that the total speaker
load on each output is no lower tha that stated for the n
amplifier.
Select the 16 tion on the rotary switch and connect ℩op
1 x BHV speaker for a 16 load, ℩
2 x BHV speakers in parallel for an 8 load or ℩
4 x BHV speakers in parallel for a 4 load. ℩
8. Use good quality 2-core speaker wire capable of carrying the rated power and connect to the speaker
terminals. Strip back the insulation, press down the terminal, thread the wire through the terminal
post and release to grip the bare wire.
9. If installing in sheltered outdoor areas, fit the cover over the rear terminal cavity to protect the wiring
from moisture.
10. Connect the + and - terminals on the speaker to the relative outputs on the amplifier.
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as
Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2022. AVSL Group Ltd.
Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland


Product specificaties

Merk: Adastra
Categorie: Speaker
Model: BH3V

Heb je hulp nodig?

Als je hulp nodig hebt met Adastra BH3V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Adastra

Handleiding Speaker

Nieuwste handleidingen voor Speaker