Acer K242HLD Handleiding

Acer Monitor K242HLD

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Acer K242HLD (3 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
English
Attaching th
Attaching th
Attaching th
Attaching the monitor
e monitor
e monitor
e monitor to the base
to the base
to the base
to the base
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
ξ˜‚ξ˜ƒ Turn off the LCD monitor and unplug the power cord.
ξ˜‚ξ˜ƒ Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20Β° to 60Β° C (-4Β° to140Β° F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
ξ˜‚ξ˜ƒ Monitor-to-PC signal cable is frayed or damaged.
ξ˜‚ξ˜ƒ Liquid spills onto the LCD monitor or the monitor is exposed to rain.
ξ˜‚ξ˜ƒ The LCD monitor or case is damaged.
Package contents
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power
cord.
back of the monitor.
into a nearby electrical outlet.
Attaching th
Attaching th
Attaching th
Attaching thAttaching the monitor
e monitor
e monitor
e monitor e monitor to the base
to the base
to the base
to the base to the base
1 Remove the monitor base from the packaging and place it on a stable and level workspace.
2 Remove the monitor from the packaging.
3 Align the release button at the buttom of the monitor with the corresponding slot at the bottom of
the base. A clicking sound signifies that the monitor has been securely attached to the base.
Attaching th
Attaching th
Attaching th
Attaching the monitor
e monitor
e monitor
e monitor to the base
to the base
to the base
to the base
LCD
monitor Power cord VGA cable
(optional)
DVI cable Quick start
(optional) guide
3. Insert the monitor power cable into the power port at the
4. Plug the power cords of your computer and your monitor
ξ˜ƒ
HDMI Cable
(Op ion l)t a
2. Connect the signal cable to the VGA and/or DVI-D/HDMI
output
the computer. Then tighten
the signal cable connector.
input socket of the monitor, and the
VGA and/or DVI-D/
(optional)
socket of
the graphics card on the
thumbscrews on
HDMI
(optional)
2
English
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this device does cause harmful interference to radio
or television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
ξ˜‚ξ˜ƒ Reorient or relocate the receiving antenna.
ξ˜‚ξ˜ƒ Increase the separation between the device and receiver.
ξ˜‚ξ˜ƒ Connect the device into an outlet on a circuit different from that to which the receiver is connected.
ξ˜‚ξ˜ƒ Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements
and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and
RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for
the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain
compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B
limits may be attached to this equipment. Operation with non-certified peripherals is likely to result
in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user
authority, which is granted by the Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Notice: Canadian users
&$1 ,&(6ξ˜ξ˜–ξ˜‹%ξ˜Œξ˜’10%ξ˜ξ˜–ξ˜‹%
6 Auto Auto If the OSD is active, press to exit the OSD. Once the OSD is inactive, Auto
press and the monitor will automatically optimize the display Auto
position, focus, and clock of your display.
7
Empowering
Key
a. When the OSD menu is active, this button will act as the exit key ( exit
OSD menu).
b. When the OSD menu is inactive, press this button to select scenario
mode.
External controls
ξ˜‚
1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates
standby/ power saving mode.
3&4 </> Minus / Plus If the OSD is active, press the or buttons to toggle between Minus Plus
the OSD options. If the OSD is inactive, press the or buttons to Minus Plus
adjust the volume. (Optional)
5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more
information ab ut where you can drop off your waste equipment for recycling,
please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
English


Product specificaties

Merk: Acer
Categorie: Monitor
Model: K242HLD

Heb je hulp nodig?

Als je hulp nodig hebt met Acer K242HLD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Acer

Handleiding Monitor

Nieuwste handleidingen voor Monitor