Acer EB243YA Handleiding

Acer Monitor EB243YA

Lees hieronder de 📖 handleiding in het Nederlandse voor Acer EB243YA (5 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely

damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform

servicing of any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to140°F). Storing the LCD monitor

outside this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances

occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Package contents

LCD monitor Power cord HDMI cable

(optional)

VGA cable

(optional) Quick start guide

USER GUIDE

LCD monitor E YB3 series-EB243

Attaching the monitor to the stand

1. Remove the monitor bracket and base from the packaging and place it on a stable and level workspace.

2. Remove the monitor from the packaging, by aligning the front-end of the bracket with the corresponding

slot on the back of the display, push the bracket into the slot until you hear a click sound.

3. Push the stand against the bracket and turn the screw clockwise to fasten it. By doing so, the bracket shall

be installed on the monitor.

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's

power cord.

2. Connect the signal cable to the VGA (optional) and/or

HDMI (optional) input socket of the monitor, and the

VGA (optional) and/or HDMI (optional) output socket

of the graphics card on the computer. Then tighten the

thumbscrews on the signal cable connector.

3. Insert the monitor power cable into the power port at the

back of the monitor.

4. Plug the power cords of your computer and your monitor

into a nearby electrical outlet.

English

6 5 4 3 12

External controls

1 & 2 LED Indicator/

Power button

Turns the monitor on/off. Blue indicates power on. Amber

indicates standby/power saving mode.

3 / /

OSD functions/

Down/Right

a. Press to view the OSD.

b. Press this button to select the desired item when in OSD menu.

4 / / Input source

switching/Up/Left

a. Use the INPUT hotkey to enter Input select function.

b. Press this button to select the desired item when in OSD menu.

Volume Key Press this button to adjust volume.

Enter Press to enter a selection in the OSD.

Empowering Key Press this button to select scenario mode.

Exit When the OSD menu is active, this button will act as the exit key

(exit OSD menu).

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15

of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful Interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does

cause harmful interference to radio or television reception, which can be determined by turning the device off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other

relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive

2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign

requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with

EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may

be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to

radio and TV reception.

English

Caution

Changes or modifications not expressly approved by the manufacturer could void the user authority, which is

granted by the Federal Communications Commission, to operate this product.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Notice: Canadian users

CAN ICES-3(B)/NMB-3(B)

Disposal of waste equipment by user in private household in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed

of with your other household waste. Instead, it is your responsibility to dispose of your waste

equipment by handing it over it a designated collection point for the recycling of waste electrical

and electronic equipment. The separate collection and recycling of your waste equipment at

the time of disposal will help to conserve natural resources and ensure that it is recycled in a

manner that protects human health and the environment. For more information about where

you can drop off your waste equipment for recycling, please contact your local city office, your

household waste disposal service or the shop where you purchased the product.

*Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Product specificaties

Merk:	Acer
Categorie:	Monitor
Model:	EB243YA
Kleur van het product:	Zwart
Beeldschermdiagonaal:	23.8 "
Resolutie:	1920 x 1080 Pixels
Touchscreen:	Nee
Oorspronkelijke beeldverhouding:	16:9
Kijkhoek, horizontaal:	178 °
Kijkhoek, verticaal:	178 °
Beeldscherm vorm:	Flat
Typische contrastverhouding:	1000:1
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
DVI-poort:	Nee
Stroomverbruik (in standby):	- W
Maximale refresh snelheid:	60 Hz
HD type:	Full HD
HDMI:	Ja
Display technologie:	LED
Responstijd:	5 ms
Ondersteunde grafische resoluties:	1920 x 1080 (HD 1080)
VESA-montage:	Ja
Paneelmontage-interface:	100 x 100 mm
Helderheid (typisch):	250 cd/m²
Diepte ( zonder voet ):	- mm
Hoogte (zonder voet ):	- mm
Breedte ( zonder voet ):	- mm
Gewicht (zonder voet):	3300 g
Gewicht (met standaard):	3700 g
Soort paneel:	IPS
Frameloos ontwerp:	Ja
Knippervrije technologie:	Ja
Laag-blauw-licht-technologie:	Ja
Stroomverbruik (typisch):	30 W
Bereik kantelhoek:	-5 - 20 °
kantel aanpassingen:	Ja