Acer BE320QK Handleiding

Acer Monitor BE320QK

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Acer BE320QK (4 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
โ€ข๎˜ƒ Turn off the LCD monitor and unplug the power cord.
โ€ข๎˜ƒ Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20ยฐ to 60ยฐ C (-4ยฐ to140ยฐ F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
โ€ข๎˜ƒ Monitor-to-PC signal cable is frayed or damaged.
โ€ข๎˜ƒ Liquid spills onto the LCD monitor or the monitor is exposed to rain.
โ€ข๎˜ƒ The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the MiniDP-MiniDP and/or MHL (optional)
and /or DP (optional) and/or HDMI (optional) input socket of the
monitor, and the MiniDP-MiniDP and/or MHL (optional) and/or DP
(optional) and/or HDMI (optional) output socket of the graphics card
on the computer. Then tighten the thumbscrews on the signal cable
connector.
3. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
FreeSync (HDMI/DP):
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frame๎˜ƒrates๎˜ƒfor๎˜ƒpower๎˜ƒef๎šฟcient,๎˜ƒvirtually๎˜ƒstutter๎˜ƒfree๎˜ƒand๎˜ƒlow-latency๎˜ƒdisplay๎˜ƒupdate.
1
2
3
4
5
English
External controls
1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates
standby/ power saving mode.
2 Function key
/
a. Press to view Main page. Press again to enter hotkey1 function.
b. When the Function Menu is active, press this key to view the basic
information for your monitor and current input or reset the custom
color settings to the factory defaults.
3 Function key
/
a. Press to view Main page.Press again to enter hotkey2 function.
b. When the Function Menu is active, press this button to select
select scenario mode or game mode .
4 Function key
/
X
a. Press to view Main page.Press again to enter Input select
function.
b. When the Function Menu is active, this button will quit the OSD.
5 Function key
/
a. Press to view Main page.Press again to enter next function in
the Function Menu.
b. The single toggle button on the backside of the Display bezel
operates like a joystick. To move the cursor, simply toggle the
button in four directions. Press the button to select desired option.
Green indicates operable. Grey indicates inoperable.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
โ€ข๎˜ƒ Reorient or relocate the receiving antenna.
โ€ข๎˜ƒ Increase the separation between the device and receiver.
โ€ข๎˜ƒ Connect the device into an outlet on a circuit different from that to which the receiver is connected.
โ€ข๎˜ƒ Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and
other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS
Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance
with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B
limits๎˜ƒmay๎˜ƒ be๎˜ƒattached๎˜ƒ to๎˜ƒ this๎˜ƒ equipment.๎˜ƒOperation๎˜ƒwith๎˜ƒ non-certi๎šฟed๎˜ƒperipherals๎˜ƒ is๎˜ƒlikely๎˜ƒto๎˜ƒ result๎˜ƒin๎˜ƒ
interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority,
which is granted by the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
English
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information ab ut where you can drop off your
waste๎˜ƒequipment๎˜ƒfor๎˜ƒ recycling,๎˜ƒplease๎˜ƒcontact๎˜ƒyour๎˜ƒlocal๎˜ƒcity๎˜ƒof๎šฟce,๎˜ƒyour๎˜ƒhousehold๎˜ƒ
waste disposal service or the shop where you purchased the product.
SPECIFICATION
LCD Panel
Driving system TFT Color LCD
Size 31.5"W (80cm)
Pixel pitch 0.06053mm(H) x 0.18159mm(V)
Brightness 350cd/m2(Typical)
Contrast 100,000,000:1Max. (ACM)
Viewable angle 178ยฐ (H) 178ยฐ (V) (CR
โ‰ฅ10) (Typical)
Response time 4ms (G to G,Typical)
Panel Type In-Plane Switching
Video Digital interface
H-Frequency 30~160KHz (HDMI&MHL), 160~160KHz(DP)
V-Frequency 40~75Hz(HDMI), 40~60Hz(DP), 50~75Hz(MHL)
Display Colors 1.07Billion Colors
Dot Clock 600MHz
Max. Resolution 3840x2160@60Hz
Plug & Play VESA DDCCI/DDC2B
Energy๎˜ƒEf๎šฟciency๎˜ƒClass A
*Annual Energy Consumption 110 (kWh) (for HDMI-input Model)
Power consumption
@200cd/m2
ON Mode 41W(typ.)
Sleep Mode 0.45W(typ.)
Off Mode 0.35W(typ.)
Input Connector
MHL (Only MHL Model)
HDMI (Only HDMI Model)
DP (Only DP-Input Model)
USB Hub / USB3.0 x 4 (Only USB Hub Model)
Input Video Signal
DP signal (Only DP Model)
MHL signal (Only MHL Model)
HDMI signal (Only HDMI-Input Model)(Optional)
Speakers 2W x 2
Audio Audio-Input (Only Audio-Input Model)
Audio-Output (Only Audio-Output Model)
Maximum Screen Size Horizontal:697mm
Vertical:392mm
Power Source 100-240V~, 50/60Hz
Environmental
Considerations
Operating Temp: 5ยฐ to 35ยฐC
Storage Temp: -20ยฐ to 60ยฐC
Operating Humidity: 10% to 85%
Dimensions 715(W) x 478~593(H) x 229(D)mm
Weight (N. W.) 10.2kg Unit (net)

Product specificaties

Merk: Acer
Categorie: Monitor
Model: BE320QK

Heb je hulp nodig?

Als je hulp nodig hebt met Acer BE320QK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Monitor Acer

Acer

Acer SB270G0 Handleiding

8 Juli 2024
Acer

Acer HA270G0 Handleiding

8 Juli 2024
Acer

Acer X49X Handleiding

8 Juli 2024
Acer

Acer EK240YE Handleiding

8 Juli 2024
Acer

Acer EK220QH3 Handleiding

8 Juli 2024
Acer

Acer XZ271P3 Handleiding

8 Juli 2024
Acer

Acer ED340CUS3 Handleiding

8 Juli 2024
Acer

Acer B278UE Handleiding

8 Juli 2024
Acer

Acer SB240YG0 Handleiding

8 Juli 2024
Acer

Acer HA270E Handleiding

8 Juli 2024

Handleiding Monitor

Nieuwste handleidingen voor Monitor

Asus

Asus VK278Q Handleiding

15 November 2024
Asus

Asus ROG Strix XG27A Handleiding

15 November 2024
Nec

Nec MultiSync L220W Handleiding

14 November 2024
Nec

Nec MultiSync AS242W-BK Handleiding

14 November 2024
Nec

Nec MultiSync AS242W Handleiding

14 November 2024
Advantech

Advantech FPM-3171G-R3BE Handleiding

14 November 2024
Advantech

Advantech IDS-3315R-50XGA1 Handleiding

14 November 2024
Advantech

Advantech FPM-715W-P9AE Handleiding

14 November 2024
Advantech

Advantech FPM-717-R9AE Handleiding

13 November 2024
Advantech

Advantech IDS-3315P-50XGA1 Handleiding

13 November 2024