Zempire Jetstream Handleiding

Bekijk gratis de handleiding van Zempire Jetstream (4 pagina’s), behorend tot de categorie Tent. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.1 sterren uit 6 reviews. Heb je een vraag over Zempire Jetstream of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1.Clear your site making sure there are no

sharp objects where you are going to

pitch your tent. Try to get a site that is

as flat as possible.

2.Assemble the 8 pole sections.

Ensure that the poles are inserted

fully into the steel Ferrule connectors.

4.Thread the RED poles through

the pole sleeves that run diagonally

across the centre of the tent. Tension

the poles inserting the pins located

Directly underneath each pole

sleeve into the ends of the poles. It

may be easier to have someone to

support the crossover of the poles

during this step.

3.Firstly peg our the 4 corners of

the centre of the tent( ). Then peg

out each corner of the bedrooms( ).

Try to get the floor sitting as flat as

possible at each stage.

5.thread the GREEN poles through

the pole sleeves on either side of the

centre dome. Insert the pins into the

pole ends.

6.Thread the YELLOWpoles through

the pole sleeves on either end of the

tent. Insert the pins into the

pole ends.

7. Thread the BLUE poles through

the pole sleeves at the front and

rear of the tent. Insert the pins into

the pole ends.

9.Pull the fly over the tent

and connect the SR buckle sewn

onto the fins at either side. Attach

the hooks onto the loops sewn

around the pole sleeves.

10.Peg out all the guy ropes. Try to have

guy ropes at a 45o angle to the ground.

PITCHING INSTRUCTIONS - JETSTREAMairflowseries

8.Peg out all remaining peg points

around the tent. Firmly peg out the

ORANGEwebbing straps

attached to the large fins at either

side of the tent. Also peg out lower

vents at this stage.

2x

2x

2x

2x

Product specificaties