Zagg Rugged Book Go Handleiding

Zagg Niet gecategoriseerd Rugged Book Go

Lees hieronder de 📖 handleiding in het Nederlandse voor Zagg Rugged Book Go (26 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 278 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
Keyboard Instructions
rugged book go
*WARRANTY REGISTRATION
Your ZAGG Rugged Book Go comes with a one-year manufacturer’s warranty. In order to activate
the warranty, you must register your Rugged Book Go as well as keep your purchase receipt. If you
purchased your ZAGG Rugged Book Go from ZAGG.com, ZAGG has already registered it and has a
copy of your proof of purchase.
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.com/faq
See the important Health and Safety information on page 7 before using this product.
INSERTING/REMOVING YOUR DEVICE
DETACHING THE CASE FROM THE KEYBOARD
1. Hold your device in landscape mode with the volume control
buttons facing up. Insert the top half of your device at an angle
into the top of the case and apply light pressure to snap it snuggly
into place.
2. At the top of the keyboard, there is a hinged magnetic bar with
two long teeth at either end. At the bottom of the case, you’ll see
two long slots that will fit the teeth on the magnetic hinge bar.
Line the slots up with the teeth and lower the case face down onto
the keyboard. You will feel the powerful magnetic bar engage and
attach the keyboard and case.
3. You can now open the case and adjust the kickstand on the back
to support your tablet at an ideal viewing angle.
4. To easily remove your device from the case, first detach the case
from the keyboard. (See directions below.) Then hold the top of
the case with one hand and press against the back of the case with
the other. Then grasp the exposed side of your device and lift/pull
it away from the cover.
Hold one of the top corners of the keyboard in one hand, hold the
corresponding top corner of the case with the other hand, and pull the
case back away from the keyboard. This will disengage the magnets
holding the keyboard and case together.
POWERING ON AND OFF
1. To turn your Rugged Book Go on, press the Power button
located at the top right corner of the keyboard. A green LED will
light briefly.
2. To turn your Rugged Book Go o, press and hold the Power button
for three seconds. A red LED will flash indicating it has turned o.
1. Ensure your device’s Bluetooth® is on.
2. Press your Rugged Book Go’s or keys for three seconds. A
blue LED light on the Power button will begin pulsing, indicating
your Rugged Book Go is in pairing mode.
3. Your device will display “ZAGG Rugged Book Go” as an available
pairing option. Select it and complete any other pairing steps
based on your device.
4. To pair your Rugged Book Go to another device, repeat steps
2 and 3. To toggle between devices, simply press or .
5. Once paired, the LED light under the Power button will stop
pulsing and fade to o. Once begun, if the Rugged Book Go
doesn’t complete pairing after 60 seconds, it will abort the
process. If this happens, repeat steps 2 and 3.
1. Press the Keyboard Hide/Show button. This will disengage the
Rugged Book Go keyboard and allow you to use your device’s
on-screen keyboard. Press the Keyboard Hide/Show button again
when you are ready to use your Rugged Book Go keyboard.
2. Turn o the Bluetooth® connection from your device.
3. Turn your Rugged Book Go keyboard o.
PAIRING YOUR RUGGED BOOK GO
DISCONNECTING YOUR KEYBOARD
Your Rugged Book Go can pair with up to two devices at once. Pairing your
Rugged Book Go is easy; just follow these instructions.
Your Rugged Book Go features a case that protects your device even when it’s
not connected to your keyboard. When you’d like to use the case without the
keyboard, there are three ways you can switch to your onscreen keyboard.
1
1
2
2


Product specificaties

Merk: Zagg
Categorie: Niet gecategoriseerd
Model: Rugged Book Go
Kleur van het product: Zwart
Breedte: - mm
Diepte: - mm
Hoogte: - mm
Materiaal behuizing: Thermoplastische urethaan (TPU)
Stroombron: Batterij/Accu
Connectiviteitstechnologie: Draadloos
Afdekzeil: Ja
Merkcompatibiliteit: Apple
Backlight: Ja
Aansluiting: Bluetooth
Backlight-kleur: Multi
Numeriek toetsenblok: Nee
Aanwijsapparaat: Nee
Compatibiliteit: iPad Pro 11
Levensduur batterij: 1 jaar
Polssteun: Nee
Maximale schermgrootte: 11 "
Taal toetsenbord: Scandinavisch

Heb je hulp nodig?

Als je hulp nodig hebt met Zagg Rugged Book Go stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Zagg

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd