Technoline WQ 323 Handleiding

Bekijk gratis de handleiding van Technoline WQ 323 (2 pagina’s), behorend tot de categorie Daru. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over Technoline WQ 323 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Talking Alarm Clock

Features

•Quartz alarm clock

•Date display

•4 alarms

•Hourly time announcement

•Stopwatch up to max. 23h 59min 59s

•Volume control (2 steps)

•Blue backlight

Key instructions

SET key: Press once to check the year and talking time. Press for a while to

enter into time setting.

UP key:

Press once to turn on or off the Hourly time announcement function

.

When it’s in setting mode, it uses as an UP-adjusting key.

MODE key:

Press once to enter into the following modes: Count up

Æ

Alarm 1

Æ

Alarm 2 Æ Alarm 3 Æ Alarm 4 Æ Return to normal time

LIGHT switch: To turn on or off the backlight

TALK/LIGHTkey: When LIGHT switch is at ON position, press TALK/LIGHT key to talk

time and light up the backlight for 5 seconds, whereas when LIGHT

switch is at OFF position, press this key to talk time only.

VOLUME switch: To select High or Low volume.

Time setting

1. Press SET key for a while to enter into time setting. The setting digits will flash in the

following sequence: Hour Æ Minute Æ Year Æ Month Æ Day Æ Hour…

2. Use UP key to select the digit. Press UP key for a while to speed up the digit

up-adjustment.

3. Press MODE key to exit the setting mode. The setting is saved automatically and the

clock returns to normal time mode.

If there’s no any key pressed in 1 minute, the clock will also exit the setting mode and returns

to normal time mode. The setting is saved automatically.

Hourly time announcement

In normal time mode, press UP key to turn on or off the hourly time announcement function.

Count up setting

1. In normal time mode, press MODE key once to enter into Count Up mode.

2. Press UP key to start or pause counting up.

3. When the clock is counting up, press SET key once to change the display of Second digit

to “ : ” flashing in the middle. When the clock count up is paused, press SET key to reset.

1

Product specificaties