Saro FINN 330-1090 Handleiding

Saro Niet gecategoriseerd FINN 330-1090

Lees hieronder de 📖 handleiding in het Nederlandse voor Saro FINN 330-1090 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 226 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Operating Instructions

Heated Display

Model FINN order no. 330-1090

CONTENTS

1. General Information

2. Safety Notes

3. Transportation and Placement

4. Operation

5. Cleaning

6. Technical Data and Special Features

7. Circuit Diagram

8. Waste Disposal

Page 1

Operating Instructions Heated Display Model FINN

1. General Information

• Carefully read these operating instructions through as they contain important information

for the safe and correct use of the appliance.

• It is advisable to keep the operating instructions in a place where you have them always

ready to hand.

• If you pass the appliance to a third party, these operating instructions should be handed

over.

• Dispose the packing material according to the local regulations. All the packaging items

(plastic bags, cardboard, polystyrene foam, nails, etc.) must not be left within reach of

children, in that they are potential sources of danger.

• As soon as you have unpacked the heated display, check whether everything is in a

faultless condition. Should anything be damaged, do not connect the appliance as such,

but inform your dealer.

• The heated display must only be used for the intended purpose, like showing or storage

of hot products/food. Improper use can cause damages and lead to the loss of the

warranty.

• The plastic-coated grids are adjustable.

• In case of fault and/or malfunction, pull the power plug from the socket and inform your

dealer. He will carry out the repair with original spare parts

• The manufacturer/dealer cannot be made responsible for damages which arise through

not observing these operating instructions. Apart from this, if these instructions are not

observed, the safety of the heated display is no longer guaranteed.

2. Safety Notes

• Connect the heated display to a properly installed and grounded single power socket. Do

not connect any other appliance to the same outlet.

• The outlet must be easily accessible, so that the plug can easily be removed in the case

of emergency.

• If you pull the plug from the socket, always pull at the plug and never at the cable.

• The cable must not come into contact with water or hot parts.

• Do not touch the cable and the plug with moist or wet hands.

• Regularly check the cable. If it is damaged, it must be exchanged by a specialist.

• Do not block the air intake openings in the heated display. They have to be cleaned from

time to time, because dirt and dust can block the slots.

• Do not place any heavy objects on top of the heated display.

• Never put dangerous products (inammable and explosive) nearby the heated display.

• The heated display is to be used indoors only.

• Repairs may only be undertaken by a qualied specialist using original spare parts.

• Do not attempt to repair the heated display by yourself.

• Ensure that children do not play with heated display respectively the door.

• Before each cleaning or repair pull the power plug out of the socket.

• Do not use a wet rag (only moist), high pressure cleaner or a jet of water.

• If you do not need the heated display for a long time, pull the plug from the socket and

clean everything (see point 5 “Cleaning”).

Page 2

Operating Instructions Heated Display Model FINN

3. Transportation and Placement

• Please be careful during the transportation or moving of the heated display.

• Take good care of the glass panes to prevent breakage.

• Dispose the packing material according to the local regulations. All the packaging items

(plastic bags, cardboard, polystyrene foam, nails, etc.) should not be left within reach of

children, in that they are potential sources of danger.

• Place the heated display on a stable, dry and even surface.

• The distance from both sides and back of the heated display to wall must be at least 10

cm.

• Keep the heated display out of direct sun or other heat sources to ensure correct tempe-

ratures can be achieved.

• Do not block the air intake openings in the headted display.

4. Operation

• Clean the heated display and the grids with a moist cloth and a mild cleaning detergent.

Dry everything carefully. Do not use aggressive detergents, steel wool or high pressure

cleaner or a jet of water. (See also under point 5 “Cleaning”)

• Remove the water bowl and then ll the bowl with water and put it into the appliance.

• Put the grids into the heated display.

• Put the plug into the plug socket.

• The distance of the grids should suit the products height.

• Place the products in a proper way into the heated display, so that nothing falls out, if you

open the door.

• Place not too much into the heated display, because of the air circulation.

• Avoid unnecessary opening of the door.

• Ensure the door is properly closed at all times.

• During power failure open the door rarely and for short time only. Do not insert further

food.

• The heated display has on the back above an analog temperature display. Here you can

see the desired indoor temperature.

• On the back there is a temperature display also, which allows you to set the desired

temperature between 30° and 90° C.

5. Cleaning

• Clean the heated display regularly.

• Before each cleaning pull the power plug from the socket.

• Clean the exterior surfaces and the grids with a soft, damp, warm cloth and a commercial

detergent. Wipe o and dry everything carefully.

• The water bowl has to be descaled from time to time and the glass panes can be cleaned

with a cleaning detergent for windows.

• The glass panes can be cleaned with a cleaning detergent for windows.

• Do not use aggressive detergents, steel wool or abrasive sponges. The heated display

may not be hosed down with water.

• Brush o from time to time the dirt from the slots in the interior of the heated display. Use

at the same time a vacuum cleaner.

• If you do not need the heated display for a long time, pull the plug from the socket and

clean everything as described above.

Page 3

Product specificaties

Merk:	Saro
Categorie:	Niet gecategoriseerd
Model:	FINN 330-1090
Kleur van het product:	Roestvrijstaal
Gewicht:	24000 g
Breedte:	460 mm
Diepte:	448 mm
Hoogte:	785 mm
Plankmateriaal:	Chroom
Aantal schappen:	3 schappen
Materiaal:	Roestvrijstaal
Verstelbare plateaus:	Ja
Aantal per verpakking:	1 stuk(s)