Pyle PLCM4565 Handleiding

Pyle Fotocamera PLCM4565

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Pyle PLCM4565 (6 pagina's) in de categorie Fotocamera. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Backup Camera & Video Monitor System
PLCM4565
with 4.3โ€™โ€™ Display Rearview Mirror,
Smart Responsive Distance Scale Lines,
Angle Adjustable Waterproof Cam
Please read instructions carefully before installation and use.
Installation should be performed by a professional installer.
General Introduction
This rear view mirror monitor is designed for car rear view purpose, which can work
with a reversing camera (NTSC or PAL) to show the real-time images behind your
car, with good compatibility with multimedia parking sensor system beside the
camera. With dual video input, it can be to a car DVD player, too. When connected
reversing gear is engaged the rear view system automatically starts to work and
when the monitor is powered o๎€Ÿ, the mirror functions just like a normal rear view
mirror as the monitor is hidden and almost invisible. OEM Replacement style with
Bluetooth and compass function optional.
Operation
โ€ข The screen only works when it has video signal going into it. When video 1 input
receives signal the screen turns to video one. You can use the power buttons ON
to turn the mirror o๎€Ÿ and on. When the signal is removed the screen turns o๎€Ÿ.
โ€ข When video channel 2 receives video signal the screen powers ON and
switches to video two, regardless of whether there is signal going into channel 1.
When in video two mode, the power button on the mirror can be used to control
5 di๎€Ÿerent brightness settings of the monitor. When signal is removed from video
two either the screen will switch to video one if there is signal present there or
switch o๎€Ÿ if there is no signal.
โ€ข The screen can adjust its brightness according to the ambient light condition.
When the ambient light is strong, the screen will be brighter; similarly, the screen
will decrease its brightness to protect your eyesight and so it isnโ€™t too bright
while driving when the ambient light is low.
โ€ข The mirror also has a compass and temperature features, long press the power
button to this function, when the compass works, it will indicate the ON/OFF
driving direction with 8 di๎€Ÿerent directions (E, SE, A, SW, W, NW, N, NE);
In temperature mode is alternating with outside temperature.
www.PyleUSA.com
1
Wiring Diagram
Rearview Mirror
Attention
When connecting with Power cable, please make sure not to mistaken the positive
and negative pole, otherwise the fuse will melt down itself immediately for security
protection. In case it happens, please replace the melted fuse with a new one with
same speci๎€žcation, and the connect properly to the right pole. Don't randomly
increase the current magnitude of the fuse, and NEVER use metal wire as a substitute.
REAR VIEW BACKUP CAMERA
Wire Connection
1. Please hard wire the red positive wire connected to the round 1mm DC plug
(pictured below) to your reverse tail light positive 12V connection and the black
wire to the closest available ground. You will probably need a small length of wire
to reach from your reverse tail light to the DC plug.
www.PyleUSA.com 2
RED 12V (ACC) +
BLACK(to Ground)
Av1(to DVD player)
Av2(to Reversing camera)
TEMPERATURE IN
TEMPERATURE OUT
Ambient Light Sensor Standby Indicator
Power Button
COMPASS
When V1 channel has signal in, press to on/o๏ฌ€
When V2 channel has signal in, press to adjust brightness


Product specificaties

Merk: Pyle
Categorie: Fotocamera
Model: PLCM4565

Heb je hulp nodig?

Als je hulp nodig hebt met Pyle PLCM4565 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fotocamera Pyle

Handleiding Fotocamera

Nieuwste handleidingen voor Fotocamera